Please wait a minute...
Frontiers of Chemical Science and Engineering

ISSN 2095-0179

ISSN 2095-0187(Online)

CN 11-5981/TQ

邮发代号 80-969

2019 Impact Factor: 3.552

Frontiers of Chemical Engineering in China  2009, Vol. 3 Issue (1): 112-118   https://doi.org/10.1007/s11705-009-0149-x
  RESEARCH ARTICLE 本期目录
A novel composite coating mesh film for oil-water separation
A novel composite coating mesh film for oil-water separation
Futao QIN, Zhijia YU(), Xinhui FANG, Xinghua LIU, Xiangyu SUN
School of Chemical Engineering, Dalian University of Technology, Dalian 116012, China
 全文: PDF(337 KB)   HTML
Abstract

Polytetrafluoroethylene-polyphenylene sulfide composite coating mesh film was successfully prepared by a simple layered transitional spray-plasticizing method on a stainless steel mesh. It shows super-hydrophobic and super-oleophilic properties. The contact angle of this mesh film is 156.3° for water, and close to 0° for diesel oil and kerosene. The contact angle hysteresis of water on the mesh film is 4.3°. The adhesive force between the film and substrate is grade 0, the flexibility is 1 mm and the pencil hardness is 4H. An oil-water separation test was carried out for oil-contaminated water in a six-stage super-hydrophobic film separator. The oil removal rate can reach about 99%.

Key wordssuper-hydrophobic    super-oleophilic    composite coating    mesh film    separation of oil and water
收稿日期: 2008-08-31      出版日期: 2009-03-05
Corresponding Author(s): YU Zhijia,Email:yuzhijia@dl.cn   
 引用本文:   
. A novel composite coating mesh film for oil-water separation[J]. Frontiers of Chemical Engineering in China, 2009, 3(1): 112-118.
Futao QIN, Zhijia YU, Xinhui FANG, Xinghua LIU, Xiangyu SUN. A novel composite coating mesh film for oil-water separation. Front Chem Eng Chin, 2009, 3(1): 112-118.
 链接本文:  
https://academic.hep.com.cn/fcse/CN/10.1007/s11705-009-0149-x
https://academic.hep.com.cn/fcse/CN/Y2009/V3/I1/112
Fig.1  
Fig.2  
Fig.3  
Fig.4  
Fig.5  
Fig.6  
test itemsPTFEPTFE-PPStest method
adhesive forcegrade 5grade 0GB/T 9286-1998
flexility1 mm1 mmGB/T 1731-93
pencil hardness4B4HGB/T 6739-1996
Tab.1  
concentrationperformancehydrophobicityoleophilicity
H2SO498%??
HCl30%??
HNO365%??
HF40%?
CH3COOH36%?
NH3·H2O25%??
NaOH50%?
Acetone-?
Kerosene-?
Diesel oil-?
Atmosphere-?
Tab.2  
Fig.7  
Fig.8  
1 Neinhuis C, Barthlott W. Characterization and distribution of water-repellent, self-cleaning plant surfaces. Annals of Botany , 1997, 79: 667-677
2 Gao X F, Jiang L. Water-repellent legs of water striders. Nature , 2004, 432: 36-36
3 Lee W, Jin M K, Yoo W C, Lee J K. Nanostructuring of a polymeric substrate with well-defined nanometer-scale topography and tailored surface wettability. Langmuir , 2004, 20: 7665-7669
4 Jiang L. Nanostructured materials with superhydrophobic surface from nature to biomimesis. Chemical Industry and Engineering Progress , 2003, 22(12): 1258-1262
5 Bhagat S D, Oh C S, Kim Y H, AhnY S, Yeo J G. Methyltrimethoxysilane based monolithic silica aerogels via ambient pressure drying. Microporous and Mesoporous Materials , 2007, 100: 350-355
6 Rao A V, Bhagat S D, Hirashima H, Pajonk G M. Synthesis of flexible silica aerogels using methyltrimethoxysilane (MTMS) precursor. Journal of Colloid and Interface Science , 2006(300): 279 -285
7 Lau K K S, Gleason K K. Particle functionalization and encapsulation by initiated chemical vapor deposition (iCVD). Surface and Coatings Technology , 2007, 201: 9189-9194
8 Wang Q J, Quan Y W, Zhang J S, Chen Q M. Preparation of super water-repellent membrane by radiation-induced copolymerization. Surface & Coatings Technology , 2006, 200: 5493-5497
9 Gao X F, Yao X, Jiang L. Effects of rugged nanoprotrusions on the surface hydrophobicity and water adhesion of anisotropic micropatterns. Langmuir , 2007, 23: 4886-4891
10 Pozzato A, Zilio S D, Fois G. Superhydrophobic surfaces fabricated by nanoimprint lithography. Microelectronic Engineering , 2006, 83: 884-888
11 Qian B T, Shen Z Q. Fabrication of Superhydrophobic Surfaces by Dislocation-Selective Chemical Etching on Aluminum, Copper, and Zinc Substrates. Langmuir , 2005, 21: 9007-9009
12 Li Y F, Yu Z J, Yu Y F, Sun Y F. Preparation of super-hydrophobic surface on brass by chemical etching. Journal of Chemical Industry and Engineering (China) , 2007, 58(12): 3117-3121
13 Shirtcliffe N J, McHale G, Newton M I, Perry C C. Wetting and wetting transitions on copper-based super-hydrophobic surfaces. Langmuir , 2005, 21: 937-943
14 Fresnais J, Chapel J P, Poncin-Epaillard F. Synthesis of transparent superhydrophobic polyethylene surfaces. Surface & Coatings Technology , 2006, 200: 5296-5305
15 Kim S H, Kim J H, Kang B K, Uhm H S. Superhydrophobic CFxcoating via in-line atmospheric RF plasma of He-CF4-H2. Langmuir , 2005, 21: 12213-12217
16 Satyaprasad A, Jain V, Nema S K. Deposition of superhydrophobic nanostructured teflon-like coating using expanding plasma arc. Applied Surface Science , 2007, 253: 5462-5466
17 Li J H, Hou C S, Yu Z L, Xie M J, Yan Y G, Chen Y R, Chen H. Study on interface of polyphenylene sulfide/metal. Polymer Materials Science and Engineering , 1998, 14(3): 94-99
18 Wenzel R N. Resistance of solid surfaces to wetting by water. Ind Eng Chem , 1936, 28: 988-994
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed