Please wait a minute...
Frontiers of Chemical Science and Engineering

ISSN 2095-0179

ISSN 2095-0187(Online)

CN 11-5981/TQ

邮发代号 80-969

2019 Impact Factor: 3.552

Frontiers of Chemical Science and Engineering  2014, Vol. 8 Issue (3): 312-319   https://doi.org/10.1007/s11705-014-1434-x
  本期目录
Calculation on phase diagrams of polyetherimide/ N,N-dimethylacetamide/H2O-BuOH casting system and their relevance to membrane performances
Ming TAN1,2,Gaohong HE1,*(),Yan DAI1,Rujie WANG1,Wenhua SHI1
1. State Key Laboratory of Fine Chemicals, R&D Center of Membrane Science and Technology, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China
2. Key Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
 全文: PDF(2120 KB)   HTML
Abstract

The ternary phase diagrams of polyetherimide (PEI)/N,N-dimethylacetamide (DMAc) with H2O and BuOH as non-solvent were simulated using solubility parameter and Flory-Huggins theory. The phase diagrams show that 5.5% H2O/BuOH system containing 5% BuOH and 0.5% H2O, or 6.5% H2O/BuOH system containing 6.2% BuOH and 0.3% H2O is required to induce liquid-liquid demixing for 20 wt-% PEI/DMAc casting solution. Therefore, BuOH can enhance the phase separation of the PEI casting solution and hereby induce higher porosity of the membrane, and the diffusion of BuOH into the water coagulation bath causes larger pore size easily compared with DMAc. Our predictions that the membrane pure water flux first increases then decreases, and the rejection ratio of bovine serum albumin decreases with the increasing concentration of BuOH were validated by the experiments using the prepared membranes.

Key wordsphase diagram    solubility parameter    interaction parameter    ultrafiltration    Flory-Huggins theory
收稿日期: 2013-09-15      出版日期: 2014-10-11
Corresponding Author(s): Gaohong HE   
 引用本文:   
. [J]. Frontiers of Chemical Science and Engineering, 2014, 8(3): 312-319.
Ming TAN,Gaohong HE,Yan DAI,Rujie WANG,Wenhua SHI. Calculation on phase diagrams of polyetherimide/ N,N-dimethylacetamide/H2O-BuOH casting system and their relevance to membrane performances. Front. Chem. Sci. Eng., 2014, 8(3): 312-319.
 链接本文:  
https://academic.hep.com.cn/fcse/CN/10.1007/s11705-014-1434-x
https://academic.hep.com.cn/fcse/CN/Y2014/V8/I3/312
Fig.1  
No.SystemNS/DMAc interaction parameters (g12)Source
H2O/DMAc0.185+ 0.155u2 - 1.02 u22 + 1.79 u23 - 1.10u24[29]
BuOH/DMAc0.4554 - 0.0292u2 + 0.0127u22 - 0.005u23 + 0.0022u24[30]
Tab.1  
Hildebrand solubility parameter /MPa0.5Hansen solubility parameter /MPa0.5Source
DispersionPolarHydrogen bonding
H2O47.815.616.042.3[16,31]
BuOH23.115.985.7315.76[32,33]
DMAc22.7416.7811.4610.23[31,32,34]
PEI23.521.17.47.1[16,34]
Tab.2  
SystemEq. (5)Eq. (6)Eq. (7), α = 1Eq. (7), α = 0.6
H2O/PEI4.304.642.601.56
BuOH/PEI0.0050.3451.691.01
DMAc/PEI0.020.360.940.56
Tab.3  
Fig.2  
H2O/BuOH systemBuOH/H2O (vol/vol)g12g13χ23υ /L·mol-1
9.3270.4292 - 0.0114u2 + 0.0873u22 - 0. 1688u23 + 0.1045u241.780.9485.2
22.860.4441 - 0.0215u2 + 0.0306u22 - 0.0702u23 + 0.0440u241.730.9489.3
Tab.4  
Fig.3  
Fig.4  
Fig.5  
1 Marcel M. Basic Principles of Membrane Technology. 2nd ed. Dordrecht, Netherland: Kluwer academic publishers, 1996, 151
2 Shi J, Yuan Q, Gao C. Handbook of membrane technology. Beijing: Chemical industry press, 2001, 368-369 (in Chinese)
3 Barzin J, Sadatnia B. Theoretical phase diagram calculation and membrane morphology evaluation for water/solvent/polyethersulfone systems. Polymer, 2007, 48(6): 1620-1631
4 Zhang J, Zhang Y, Zhao J. Thermodynamic study of non-solvent/dimethyl sulfoxide/polyacrylonitrile ternary systems: Effects of the non-solvent species. Polymer Bulletin, 2011, 67(6): 1073-1089
5 Mikos A G, Peppas N A. Flory interaction parameter χ for hydrophilic copolymers with water. Biomaterials, 1988, 9(5): 419-423
6 Peppas N A, Lisa B P. Controlled release of fragrances from polymers I. Thermodynamic analysis. Journal of Controlled Release, 1996, 40(3): 245-250
7 Lindvig T, Michelsen M L, Kontogeorgis G M. Thermodynamics of paint-related systems with engineering models. AIChE Journal. American Institute of Chemical Engineers, 2001, 47(11): 2573-2584
8 Hansen C M. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton: CRC Press, 2007, 32
9 Lindvig T, Michelsen M L, Kontogeorgis G M. A Flory-Huggins model based on the Hansen solubility parameters. Fluid Phase Equilibria, 2002, 203(1-2): 247-260
10 Feng C Y, Khulbe K C, Chowdhury G, Matsuura T, Sapkal V C. Structural and performance study of microporous polyetherimide hollow fiber membranes made by solvent-spinning method. Journal of Membrane Science, 2001, 189(2): 193-203
11 Kim I C, Yoon H G, Lee K H. Formation of integrally skinned asymmetric polyetherimide nanofiltration membranes by phase inversion process. Journal of Applied Polymer Science, 2002, 84(6): 1300-1307
12 Khayet M, Feng C Y, Matsuura T. Morphological study of fluorinated asymmetric polyetherimide ultrafiltration membranes by surface modifying macromolecules. Journal of Membrane Science, 2003, 213(1-2): 159-180
13 Kim I C, Lee K H. Effect of poly(ethylene glycol) 200 on the formation of a polyetherimide asymmetric membrane and its performance in aqueous solvent mixture permeation. Journal of Membrane Science, 2004, 230(1-2): 183-188
14 Bowen W R, Cheng S Y, Doneva T A, Oatley D L. Manufacture and characterisation of polyetherimide/sulfonated poly(ether ether ketone) blend membranes. Journal of Membrane Science, 2005, 250(1-2): 1-10
15 Bakeri G, Ismail A F, Shariaty-Niassar M, Matsuura T. Effect of polymer concentration on the structure and performance of polyetherimide hollow fiber membranes. Journal of Membrane Science, 2010, 363(1-2): 103-111
16 Ren J, Zhou J, Deng M. Morphology transition of asymmetric polyetherimide flat sheet membranes with different thickness by wet phase-inversion process. Separation and Purification Technology, 2010, 74(1): 119-129
17 Zhang L, He G, Zhao W, Nie F, Li X, Tan M. Studies on the coating layer in a PTFPMS/PEI composite membrane for gaseous separation. Journal of Membrane Science, 2011, 371(1-2): 141-147
18 Shamsabadi A A, Kargari A, Babaheidari M B, Laki S, Ajami H. Role of critical concentration of PEI in NMP solutions on gas permeation characteristics of PEI gas separation membranes. Journal of Industrial and Engineering Chemistry, 2013, 19(2): 677-685
19 Madaeni S S, Hasankiadeh N T, Kurdian A R, Rahimpour A. Modeling and optimization of membrane fabrication using artificial neural network and genetic algorithm. Separation and Purification Technology, 2010, 76(1): 33-43
20 Madaeni S S, Arast N, Rahimpour F, Arast Y. Fabrication optimization of acrylonitrile butadiene styrene (ABS)/polyvinylpyrrolidone (PVP) nanofiltration membrane using response surface methodology. Desalination, 2011, 280(1-2): 305-312
21 Wang Z, Yu H, Xia J, Zhang F, Li F, Xia Y, Li Y. Novel GO-blended PVDF ultrafiltration membranes. Desalination, 2012, 299: 50-54
22 Tan M, He G, Nie F, Zhang L, Hu L.Optimization of ultrafiltration membrane fabrication using backpropagation neural network and genetic algorithm. Journal of the Taiwan Institute of Chemical Engineers, 2014, 45(1): 68-75
23 Hao J H, Wang S. Calculation of alcohol-acetone-cellulose acetate ternary phase diagram and their relevance to membrane formation. Journal of Applied Polymer Science, 2001, 80(10): 1650-1657
24 Honeywell. Unisim Design Simulation Basis Reference Guide. London: Honeywell, 2010, 380-381
25 Pesek S C, Koros W J. Aqueous quenched asymmetric polysulfone membranes prepared by dry/wet phase separation. Journal of Membrane Science, 1993, 81(1-2): 71-88
26 Barzin J, Sadatnia B. Correlation between macrovoid formation and the ternary phase diagram for polyethersulfone membranes prepared from two nearly similar solvents. Journal of Membrane Science, 2008, 325(1): 92-97
27 Fredenslund A, Jones R L, Prausnitz J M. Group-contribution estimation of activity coefficients in nonideal liquid mixtures. AIChE Journal. American Institute of Chemical Engineers, 1975, 21(6): 1086-1099
28 Bowman F M, Melton J A. Effect of activity coefficient models on predictions of secondary organic aerosol partitioning. Journal of Aerosol Science, 2004, 35(12): 1415-1438
29 Li S, Jiang C, Zhang Y. The investigation of solution thermodynamics for the polysufone-DMAcC-water system. Desalination, 1987, 62: 79-88
30 Wei Y M, Xu Z L, Yang X T, Liu H L. Mathematical calculation of binodal curves of a polymer/solvent/nonsolvent system in the phase inversion process. Desalination, 2006, 192(1-2): 91-104
31 Wang D, Li K, Teo W K. Phase Separation in Polyetherimide/Solvent/Nonsolvent. Journal of Applied Polymer Science, 1998, 71(11): 1789-1796
32 Hansen C M. The Universality of the Solubility Parameter. Product R&D, 1969, 8(1): 2-11
33 Liu Y, Shi B. Determination of Flory interaction parameters between polyimide and organic solvents by HSP theory and IGC. Polymer Bulletin, 2008, 61(4): 501-509
34 Chung T S, Xu Z L. Asymmetric hollow fiber membranes prepared from miscible polybenzimidazole and polyetherimide blends. Journal of Membrane Science, 1998, 147(1): 35-47
35 Altena F W, Smolders C A. Calculation of liquid-liquid phase separation in a ternary system of a polymer in a mixture of a solvent and a nonsolvent. Macromolecules, 1982, 15(6): 1491-1497
36 Yilmaz L, McHugh A J. Analysis of nonsolvent-solvent-polymer phase diagrams and their relevance to membrane formation modeling. Journal of Applied Polymer Science, 1986, 31(4): 997-1018
37 Lai J Y, Lin S F, Lin F C, Wang D M. Construction of ternary phase diagrams in nonsolvent/solvent/PMMA systems. Journal of Polymer Science. Part B, Polymer Physics, 1998, 36(4): 607-615
38 Lai J Y, Lin F C, Wang C C, Wang D M. Effect of nonsolvent additives on the porosity and morphology of asymmetric TPX membranes. Journal of Membrane Science, 1996, 118(1): 49-61
39 Liu L, Chakma A, Feng X. A novel method of preparing ultrathin poly(ether block amide) membranes. Journal of Membrane Science, 2004, 235(1-2): 43-52
40 Chen S H, Liou R M, Lai J Y, Lai C L. Effect of the polarity of additional solvent on membrane formation in polysulfone/N-methyl-2-pyrrolidone/water ternary system. European Polymer Journal, 2007, 43(9): 3997-4007
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed