Exceptionally strong polyolefin nanocomposites are synthesized by in-situ polymerization using soluble metallocene/methylaluminoxane (MAO) as catalysts in a two-step process. First, the soluble metallocene/MAO or other single site catalysts are absorbed on the surface of the nanofillers. Then by addition of ethene or propene, a polyolefin film is formed, covering the nanoparticles, layered silicates, or fibers. The resulting polyethylene and polypropylene nanocomposites are characterized by better physical and chemical properties such as stiffness, gas barrier properties, degradation temperatures, and crystallization rates. They show better mechanical properties than materials produced by mechanical blending. The thickness of the polyolefin can be controlled by the pressure of ethene or propene and by the polymerization time. Carbon fibers and carbon nanotubes are covered with isotactic or syndiotactic polypropylene. Because of the hydrophobic character of the carbon surface, the polymer is drawn on the fiber. This leads to a reinforced combined polymer with special properties. The crystallization temperature is 10 °C higher and therefore the crystallization rate up to 20 times faster than that of pure syndiotactic polypropylene. The form stability increases by 100% if 3 wt-% of carbon nanotubes are incorporated.
. [J]. Frontiers of Chemical Science and Engineering, 2018, 12(3): 555-563.
Walter Kaminsky. Polyolefin-nanocomposites with special properties by in-situ polymerization. Front. Chem. Sci. Eng., 2018, 12(3): 555-563.
Kaminsky W. Polyolefins: 50 years after Ziegler and Natta. I: polyethylene and polypropylene; II: polyolefins by metallocene and other single site catalysts. In: Advances in Polymer Science. Berlin: Springer, 2013
2
Zhang R, Wang Z, Flisak Z, Hao X, Liu Q, Sun W H. Achieving branched polyethylene waxes by aryliminocyclooctapyridyl nickel precatalysts: Synthesis, characterization, and ethylene polymerization. Journal of Polymer Science. Part A, Polymer Chemistry, 2017, 55(16): 2601–2610 https://doi.org/10.1002/pola.28653
3
Hofmann D, Kurek K, Thomann R, Schwabe J, Mark S, Enders M, Tees T, Muelhaupt R. Tailored nanostructured HDPE wax/UHMWPE reactor blends as additives for melt-processable all-polyethylene composites and in situ UHMWPE polymerization fiber reinforcement. Macromolecules, 2017, 50(20): 8129–8139 https://doi.org/10.1021/acs.macromol.7b01891
4
Thomas S, Zaikov G E, Valsaraj S V. Recent Advances in Polymer Nanocomposites: Synthesis and Characterization. Leiden: Brill Publisher, 2010, 1–128
5
Cromer B M, Scheel S, Luinstra G A, Coughlin E B, Leeser A J. In-situ polymerization of isotactic polypropylene-nanographite nanocomposites. Polymer, 2015, 80: 275–281 https://doi.org/10.1016/j.polymer.2015.09.074
6
Bonduel D, Bredeau S, Alexandre M, Monteverde F, Dubois P. Supported metallocene catalysis as an efficient tool for the preparation of polyethylene/carbon nanotube nanocomposites: Effect of the catalytic system on the coating morphology. Journal of Materials Chemistry, 2007, 17(22): 2359–2366 https://doi.org/10.1039/b701764b
7
Dittrich B, Wartig K A, Hofmann D, Muelhaupt R. Carbon black, multiwall carbon nanotubes, expanded graphite and functional graphene flame retarded polypropylene. Polymers for Advanced Technologies, 2013, 24: 916–926 https://doi.org/10.1002/pat.3165
8
Scot S L, Peoples B C, Yung C, Rojas R S, Khanna V, Sano H, Suzuki T, Shimizu F. Highly dispersed clay-polyolefin nanocomposites free of compatibilizers, via the in-situ polymerization of olefins by clay-supported catalysts. Chemical Communications, 2008, 35(35): 4186–4188 https://doi.org/10.1039/b718241d
9
Xalter R, Pelascini F, Mülhaupt R. Ethylene polymerization, on line particle growth monitoring, and in situ nanocomposite formation using catalysts supported on arylsulfonicacid modified boehmites. Macromolecules, 2008, 41(9): 3136–3143 https://doi.org/10.1021/ma702623e
10
Bischoff E, Concalves G P O, Simon D A, Schrekker H S, Lavorgna M, Ambrosio L, Liberman S A, Mauler R S. Unrevealing the effect of different dispersion agents on the properties of ethylene-propylene copolymers/halloysite nanocomposites. Materials & Design, 2017, 131: 232–241 https://doi.org/10.1016/j.matdes.2017.06.033
11
Kaminsky W. Discovery of methylaluminoxane as cocatalyst for olefin polymerization. Macromolecules, 2012, 45(8): 3289–3297 https://doi.org/10.1021/ma202453u
12
Kaminsky W, Funck A, Klinke C. In-situ polymerization of olefins with nanoparticles or fibers by metallocene catalysts. Topics in Catalysis, 2008, 48(1-4): 84–90 https://doi.org/10.1007/s11244-008-9044-9
13
Kaminsky W, Sinn H. Methylaluminoxane: Key component for new polymerization catalysts. Advances in Polymer Science, 2013, 258: 1–28 https://doi.org/10.1007/12_2013_226
14
Arikan B, Stadler F J, Kaschta J, Muenstedt H, Kaminsky W. Synthesis and characterization of novel ethene-graft-ethene/propene copolymers. Macromolecular Rapid Communications, 2007, 28(14): 1472–1478 https://doi.org/10.1002/marc.200700161
15
Kaminsky W, Derlin S, Hoff M. Copolymerization of propylene and norbornene with different metallocene catalysts. Polymer, 2007, 48(25): 7271–7278 https://doi.org/10.1016/j.polymer.2007.10.013
16
Duboi P, Alexandre M, Hindryckx F, Jerome R. Polyolefin-based composites by polymerization-filling technique. Journal of Macromolecular Science: Part C, 1998, 38(3): 511–565 https://doi.org/10.1080/15583729808546031
17
Alexandre M, Martin E, Dubois P, Mart M G, Jerome R. Polymerization-filling technique: An efficient way to improve the mechanical properties of polyethylene composites. Chemistry of Materials, 2001, 13(2): 236–237 https://doi.org/10.1021/cm001167u
Coates G W. Precise control of polyolefin stereochemistry using single-site metal catalysts. Chemical Reviews, 2000, 100(4): 1223–1252 https://doi.org/10.1021/cr990286u
20
Kaminsky W, Fernandes M. Discovery and development of metallocene-based polyolefins with special properties. Polyolefins Journal, 2015, 2: 1–16
Kaminsky W, Wiemann K. Polypropylene/silica-nanocomposites synthesized by in-situ polymerization. . Expected Materials for the Future (Japan), 2003, 3(11): 6–12
23
Ferreira F V, Menzes B R, Franceschi W, Ferreira E V, Lozano K, Cividanes L S, Coutinho A R, Thim G P. Influence of carbon nanotube concentration and sonification temperature on mechanical properties of HDPE/CNT nanocomposites. Fullerenes, Nanotubes, and Carbon Nanostructures, 2017, 25(9): 531–539 https://doi.org/10.1080/1536383X.2017.1359553
24
Kaminsky W. Production of polyolefins by metallocene catalysts and their recycling by pyrolysis. Macromolecular Symposia, 2016, 360(1): 10–22 https://doi.org/10.1002/masy.201500127
25
Avila-Orta C A, Raundry-Lopez C E, Davila-Rodriguez M V, Aguirre-Figueroa Y A, Crruz-Delgado V J, Neira-Velazquez M G, Medellin-Rodriguez F J, Hsiao B S. Morphology, thermal stability, and electrical conductivity of polymer nanocomposites of isotactic poypropylenes/multi-walled carbon nanotubes. International Journal of Polymeric Materials and Polymeric Biomaterials, 2013, 62(12): 635–641 https://doi.org/10.1080/00914037.2013.769159
26
Du S, Wang X, Zhang W, Flisak Z, Sun Y, Sun W H. The practical ethylene polymerization for vinyl-polyethylenes: Synthesis, characterization and catalytic behavior of α,α′-bisimino-2,3:5,6-bis(pentametylene)pyridyliron chlorides. Polymer Chemistry, 2016, 7(25): 4188–4197 https://doi.org/10.1039/C6PY00745G
27
Wang Z, Liu Q, Solan G A, Sun W H. Recent advances in Ni-mediated ethylene chain groth: Nimine-donor ligand effects on catalytic activity, thermal stability and oligo-/polymer structure. Coordination Chemistry Reviews, 2017, 350: 68–83 https://doi.org/10.1016/j.ccr.2017.06.003