The influence of the NCO/OH ratio and the 1,6-hexanediol/dimethylol propionic acid molar ratio on the properties of waterborne polyurethane dispersions based on 1,5-pentamethylene diisocyanate
1. State Key Laboratory of Materials-Oriented Chemical Engineering, College of Biotechnology and Pharmaceutical Engineering, Nanjing Tech University, Nanjing 211816, China 2. National Engineering Research Center for Coatings, CNOOC Changzhou Paint and Coatings Industry Research Institute Co., Ltd., Changzhou 213016, China
1,5-Pentamethylene diisocyanate, a novel aliphatic diisocyanate formed from bio-based 1,5-pentamethylenediamine, has been used as a hard segmented material to synthesize polyurethane. In this study, several waterborne polyurethane (WPU) dispersions have been successfully prepared by a prepolymer process from 1,5-pentamethylene diisocyanate poly(polyether) with different NCO/OH ratios and 1,6-hexanediol (HDO)/dimethylol propionic acid (DMPA) molar ratios. The Fourier transform infrared (FTIR) spectra, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, and a mechanical tensile test were used to investigate the structures, thermal stability, phase separation, crystallinity, mechanical properties, and adhesive performance of the WPU dispersions. The FTIR results indicate that the degree of hydrogen bonding and the numbers of urea groups increase as the NCO/OH ratio and HDO/DMPA molar ratio increase. Furthermore, the phase separation increases and the thermal stability decreases as the NCO/OH ratio increases or the HDO/DMPA molar ratio decreases. Finally, WPU3.0-2.4 (NCO/OH=3, HDO/DMPA=2.4) exhibits a maximum tensile strength and shear strength, pointing to its possible use as an adhesive. These results could provide a very valuable reference for industrial applications of WPU.
. [J]. Frontiers of Chemical Science and Engineering, 2019, 13(1): 80-89.
Jiao Feng, Qiuhao Lu, Weimin Tan, Kequan Chen, Pingkai Ouyang. The influence of the NCO/OH ratio and the 1,6-hexanediol/dimethylol propionic acid molar ratio on the properties of waterborne polyurethane dispersions based on 1,5-pentamethylene diisocyanate. Front. Chem. Sci. Eng., 2019, 13(1): 80-89.
VGarcia-Pacios, V Costa, MColera, J MMartin-Martinez. Waterborne polyurethane dispersions obtained with polycarbonate of hexanediol intended for use as coatings. Progress in Organic Coatings, 2011, 71(2): 136–146 https://doi.org/10.1016/j.porgcoat.2011.01.006
2
PKrol, B Krol, JKozakiewicz, SZapotoczny, BPilch-Pitera, SKozdra. Composites prepared from polyurethanes modified with silicone-acrylic nanopowders. Progress in Organic Coatings, 2015, 81: 72–79 https://doi.org/10.1016/j.porgcoat.2014.12.016
3
A CAznar, O R Pardini, J I Amalvy. Glossy topcoat exterior paint formulations using water-based polyurethane/acrylic hybrid binders. Progress in Organic Coatings, 2006, 55(1): 43–49 https://doi.org/10.1016/j.porgcoat.2005.11.001
4
D KChattopadhyay, K V S NRaju. Structural engineering of polyurethane coatings for high performance applications. Progress in Polymer Science, 2007, 32(3): 352–418 https://doi.org/10.1016/j.progpolymsci.2006.05.003
5
C QFang, X Zhou, QYu, S LLiu, D GGuo, R EYu, J BHu. Synthesis and characterization of low crystalline waterborne polyurethane for potential application in water-based ink binder. Progress in Organic Coatings, 2014, 77(1): 61–71 https://doi.org/10.1016/j.porgcoat.2013.08.004
6
S DMiao, L J Sun, P Wang, R NLiu, Z GSu, S PZhang. Soybean oil-based polyurethane networks as candidate biomaterials: Synthesis and biocompatibility. European Journal of Lipid Science and Technology, 2012, 114(10): 1165–1174 https://doi.org/10.1002/ejlt.201200050
7
RUdagama, E Degrandi-Contraires, CCreton, CGraillat, T F LMcKenna, EBourgeat-Lami. Synthesis of acrylic-polyurethane hybrid latexes by miniemulsion polymerization and their pressure-sensitive adhesive applications. Macromolecules, 2011, 44(8): 2632–2642 https://doi.org/10.1021/ma200073d
8
AAli, K Yusoh, S FHasany. Synthesis and physicochemical behaviour of polyurethane-multiwalled carbon nanotubes nanocomposites based on renewable castor oil polyols. Journal of Nanomaterials, 2014, 2014: 564384 https://doi.org/10.1155/2014/564384
9
DJi, Z Fang, WHe, KZhang, Z YLuo, T WWang, KGuo. Synthesis of soy-polyols using a continuous microflow system and preparation of soy-based polyurethane rigid foams. ACS Sustainable Chemistry & Engineering, 2015, 3(6): 1197–1204 https://doi.org/10.1021/acssuschemeng.5b00170
X HKong, G G Liu, J M Curtis. Characterization of canola oil based polyurethane wood adhesives. International Journal of Adhesion and Adhesives, 2011, 31(6): 559–564 https://doi.org/10.1016/j.ijadhadh.2011.05.004
12
AMoubarik, A Allal, APizzi, FCharrier, BCharrier. Characterization of a formaldehyde-free cornstarch-tannin wood adhesive for interior plywood. European Journal of Wood and Wood Products, 2010, 68(4): 427–433 https://doi.org/10.1007/s00107-009-0379-0
13
ATenorio-Alfonso, M C Sanchez, J M Franco. Preparation, characterization and mechanical properties of bio-based polyurethane adhesives from isocyanate-functionalized cellulose acetate and castor oil for bonding wood. Polymers, 2017, 9(12): 132 https://doi.org/10.3390/polym9040132
14
P J AGeurink, TScherer, RButer, ASteenbergen, HHenderiks. A complete new design for waterborne 2-pack PUR coatings with robust application properties. Progress in Organic Coatings, 2006, 55(2): 119–127 https://doi.org/10.1016/j.porgcoat.2005.08.014
15
MMelchiors, M Sonntag, CKobusch, EJurgens. Recent developments in aqueous two-component polyurethane (2K-PUR) coatings. Progress in Organic Coatings, 2000, 40(1-4): 99–109 https://doi.org/10.1016/S0300-9440(00)00123-5
16
X JLai, X R Li, L Wang, Y DShen. Synthesis and characterizations of waterborne polyurethane modified with 3-aminopropyltriethoxysilane. Polymer Bulletin, 2010, 65(1): 45–57 https://doi.org/10.1007/s00289-009-0233-x
17
Y SLu, R C Larock. Soybean oil-based, aqueous cationic polyurethane dispersions: Synthesis and properties. Progress in Organic Coatings, 2010, 69(1): 31–37 https://doi.org/10.1016/j.porgcoat.2010.04.024
18
XZhou, Y Li, C QFang, S JLi, Y LCheng, W QLei, X JMeng. Recent advances in synthesis of waterborne polyurethane and their application in water-based ink: A review. Journal of Materials Science and Technology, 2015, 31(7): 708–722 https://doi.org/10.1016/j.jmst.2015.03.002
VGarcia-Pacios, J A Jofre-Reche, V Costa, MColera, J MMartin-Martinez. Coatings prepared from waterborne polyurethane dispersions obtained with polycarbonates of 1,6-hexanediol of different molecular weights. Progress in Organic Coatings, 2013, 76(10): 1484–1493 https://doi.org/10.1016/j.porgcoat.2013.06.005
21
S KLee, B K Kim. High solid and high stability waterborne polyurethanes via ionic groups in soft segments and chain termini. Journal of Colloid and Interface Science, 2009, 336(1): 208–214 https://doi.org/10.1016/j.jcis.2009.03.028
22
JYang, Y L Gao, J H Li, M M Ding, F Chen, HTan, QFu. Synthesis and microphase separated structures of polydimethylsiloxane/polycarbonate-based polyurethanes. RSC Advances, 2013, 3(22): 8291–8297 https://doi.org/10.1039/c3ra40515j
23
S MCakic, I S Ristic, M M Cincovitc, N C Nikolic, L B Nikolic, M J Cvetinov. Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol. Progress in Organic Coatings, 2017, 105: 111–112 https://doi.org/10.1016/j.porgcoat.2016.10.038
24
K PSomani, S S Kansara, N K Patel, A K Rakshit. Castor oil based polyurethane adhesives for wood-to-wood bonding. International Journal of Adhesion and Adhesives, 2003, 23(4): 269–275 https://doi.org/10.1016/S0143-7496(03)00044-7
25
S SYoon, S C Kim. Modification of aqueous polyurethane dispersions by polybutadiene. Journal of Applied Polymer Science, 2005, 95(5): 1062–1068 https://doi.org/10.1002/app.21301
26
NLiu, Y H Zhao, M Q Kang, J W Wang, X K Wang, Y L Feng, N Yin, Q FLi. The effects of the molecular weight and structure of polycarbonatediols on the properties of waterborne polyurethanes. Progress in Organic Coatings, 2015, 82: 46–56 https://doi.org/10.1016/j.porgcoat.2015.01.015
27
HDu, Y H Zhao, Q F Li, J W Wang, M Q Kang, X K Wang, H W Xiang. Synthesis and characterization of waterborne polyurethane adhesive from MDI and HDI. Journal of Applied Polymer Science, 2008, 110(3): 1396–1402 https://doi.org/10.1002/app.28805
28
I MBarszczewska-Rybarek. Characterization of urethane-dimethacrylate derivatives as alternative monomers for the restorative composite matrix. Dental Materials, 2014, 30(12): 1336–1344 https://doi.org/10.1016/j.dental.2014.09.008
29
THidesaki, A Natsuji, TNakagawa, GKuwamura, DHasegawa, SYamasaki, KSato, H Takeuchi. US Patent, 20130079486A1, 2013-5-28
30
EGłowinska, JDatta. Bio polyetherurethane composites with high content of natural ingredients: Hydroxylated soybean oil based polyol, bio glycol and microcrystalline cellulose. Cellulose (London, England), 2016, 23(1): 581–592 https://doi.org/10.1007/s10570-015-0825-6
31
HFu, K Liu, CYan, WChen, Y Wang. Phase morphology and mechanical properties of aliphatic waterborne polyurethane-ureas: Effect of 1,6-hexamethylene diisocyanate (HDI)/isophorone diisocyanate (IPDI) ratio. Polymers & Polymer Composites, 2015, 23(3): 141–150 https://doi.org/10.1177/096739111502300304
32
J HChe, J M Cheon, J H Chun, C C Park, Y H Lee, H D Kim. Preparation and properties of emulsifier-/solventfree slightly crosslinked waterborne polyurethaneacrylic hybrid emulsions for footwear adhesives (III)-effect of trimethylol propane (TMP)/ethylene diamine (EDA) content. Journal of Adhesion Science and Technology, 2017, 31(17): 1872–1887 https://doi.org/10.1080/01694243.2017.1285744
33
RGallego, J F Arteaga, C Vaencia, M JDiaz, J MFranco. Gel-like dispersions of HMDI-cross-linked lignocellulosic materials in castor oil: Toward completely renewable lubricating grease formulations. ACS Sustainable Chemistry & Engineering, 2015, 3(9): 2130–2141 https://doi.org/10.1021/acssuschemeng.5b00389
34
IYilgor, E Yilgor, SDas, G LWilkes. Time-dependent morphology development in segmented polyetherurea copolymers based on aromatic diisocyanates. Journal of Polymer Science. Part B, Polymer Physics, 2009, 47(5): 471–483 https://doi.org/10.1002/polb.21652
35
Y LZhang, L S Shao, B Liu, FWang, Y HWang. Effect of molecular weight of liquid polysulfide on water and organic solvent resistances of waterborne polyurethane/polysulfide copolymer. Progress in Organic Coatings, 2017, 112: 219–224 https://doi.org/10.1016/j.porgcoat.2017.07.010
36
C BWang, S L Cooper. Morphology and properties of segmented polyether polyurethaneureas. Macromolecules, 1983, 16(5): 775–786 https://doi.org/10.1021/ma00239a014
37
VGarcia-Pacios, V Costa, MColera, J MMartin-Martinez. Affect of polydispersity on the properties of waterborne polyurethane dispersions based on polycarbonate polyol. International Journal of Adhesion and Adhesives, 2010, 30(6): 456–465 https://doi.org/10.1016/j.ijadhadh.2010.03.006
38
Y FZhang, H W Zhou, L Wang, W YJiang, M DSoucek, YYi. Preparation and characterization of castor oil-based waterborne polyurethane crosslinked with 2-amino-2-(hydroxymethyl)-1,3-propanediol. Journal of Applied Polymer Science, 2017, 134(47): 134 https://doi.org/10.1002/app.45532
39
XZhou, C Q Fang, Q Yu, RYang, LXie, Y L Cheng, Y Li. Synthesis and characterization of waterborne polyurethane dispersion from glycolyzed products of waste polyethylene terephthalate used as soft and hard segment. International Journal of Adhesion and Adhesives, 2017, 74: 49–56 https://doi.org/10.1016/j.ijadhadh.2016.12.010
40
Z ZGao, J Peng, T HZhong, JSun, X B Wang, C Yue. Biocompatible elastomer of waterborne polyurethane based on castor oil and polyethylene glycol with cellulose nanocrystals. Carbohydrate Polymers, 2012, 87(3): 2068–2075 https://doi.org/10.1016/j.carbpol.2011.10.027
41
T WPechar, G L Wilkes, B Zhou, NLuo. Characterization of soy-based polyurethane networks prepared with different diisocyanates and their blends with petroleum-based polyols. Journal of Applied Polymer Science, 2007, 106(4): 2350–2362 https://doi.org/10.1002/app.26569