Hebei Provincial Key Laboratory of Green Chemical Technology and High Efficient Energy Saving, Tianjin Key Laboratory of Chemical Process Safety, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China
Lithium-sulfur batteries have been regarded as the next-generation rechargeable batteries due to their high theoretical energy density and specific capacity. Nevertheless, the shuttle effect of lithium polysulfides has hindered the development of lithium-sulfur batteries. Herein, a novel zirconium-based metal-organic framework-801 film on carbon cloth was developed as a versatile interlayer for lithium-sulfur batteries. This interlayer has a hierarchical porous structure, suitable for the immobilization of lithium polysulfides and accommodating volume expansion on cycling. Moreover, the MOF-801 material is capable of strongly adsorbing lithium polysulfides and promoting their catalytic conversion, which can be enhanced by the abundant active sites provided by the continuous structure of the MOF-801 films. Based on the above advantages, the lithium-sulfur battery, with the proposed interlayer, delivers an initial discharge capacity of 927 mAh·g–1 at 1 C with an extremely low decay rate of 0.04% over 500 cycles. Additionally, a high area capacity of 4.3 mAh·cm–2 can be achieved under increased S loading.
X F Yang, J Luo, X L Sun. Towards high-performance solid-state Li-S batteries: from fundamental understanding to engineering design. Chemical Society Reviews, 2020, 49(7): 2140–2195 https://doi.org/10.1039/C9CS00635D
2
Y Tian, G R Li, Y G Zhang, D Luo, X Wang, Y Zhao, H Liu, P G Ji, X H Du, J D Li, Z Chen. Low-bandgap Se-deficient antimony selenide as a multifunctional polysulfide barrier toward high-performance lithium-sulfur batteries. Advanced Materials, 2020, 32(4): 1904876 https://doi.org/10.1002/adma.201904876
3
K Kalaiappan, S Rengapillai, S Marimuthu, R Murugan, P Thiru. Kombucha SCOBY-based carbon and graphene oxide wrapped sulfur/polyacrylonitrile as a high-capacity cathode in lithium-sulfur batteries. Frontiers of Chemical Science and Engineering, 2020, 14(6): 976–987 https://doi.org/10.1007/s11705-019-1897-x
4
Y Pan, Y Zhou, Q Zhao, Y Dou, S Chou, F Cheng, J Chen, H K Liu, L Jiang, S X Dou. Introducing ion-transport-regulating nanochannels to lithium-sulfur batteries. Nano Energy, 2017, 33: 205–212 https://doi.org/10.1016/j.nanoen.2017.01.025
5
Z Li, J Zhang, B Guan, D Wang, L M Liu, X W Lou. A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium-sulfur batteries. Nature Communications, 2016, 7(1): 13065 https://doi.org/10.1038/ncomms13065
6
Z Cheng, H Pan, H Zhong, Z Xiao, X Li, R Wang. Porous organic polymers for polysulfide trapping in lithium-sulfur batteries. Advanced Functional Materials, 2018, 28(38): 1707597 https://doi.org/10.1002/adfm.201707597
7
G L Cui, G R Li, D Luo, Y G Zhang, Y Zhao, D R Wang, J Y Wang, Z Zhang, X Wang, Z W Chen. Three-dimensionally ordered macro-microporous metal organic frameworks with strong sulfur immobilization and catalyzation for high-performance lithium-sulfur batteries. Nano Energy, 2020, 72: 104685 https://doi.org/10.1016/j.nanoen.2020.104685
8
Z P Sun, L J Fang, J J Cai. A hierarchical composite constructed by ZIF-8 derived carbon core and Mn3O4/N-doped carbon shell as efficient polysulfide entrapment host for Li-S batteries. Journal of Alloys and Compounds, 2020, 860: 158461 https://doi.org/10.1016/j.jallcom.2020.158461
9
X B Wang, Y Zhao, F C Wu, S M Liu, Z S Zhang, Z Y Tan, X H Du, J D Li. ZIF-7@carbon composites as multifunctional interlayer for rapid and durable Li-S performance. Journal of Energy Chemistry, 2021, 57: 19–27 https://doi.org/10.1016/j.jechem.2020.09.019
10
Y C Jeong, J H Kim, S Nam, C R Park, S J Yang. Rational design of nanostructured functional interlayer/separator for advanced Li-S batteries. Advanced Functional Materials, 2018, 28(38): 1707411 https://doi.org/10.1002/adfm.201707411
11
S Bai, X Liu, K Zhu, S Wu, H Zhou. Metal-organic framework-based separator for lithium-sulfur batteries. Nature Energy, 2016, 1(7): 16094 https://doi.org/10.1038/nenergy.2016.94
12
M Rana, M Li, M Huang, B Luo, I Gentlec, R Knibbe. Recent advances in separators to mitigate technical challenges associated with re-chargeable lithium-sulfur batteries. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2019, 7(12): 6596–6615 https://doi.org/10.1039/C8TA12066H
13
E Cha, M D Patel, J Park, J Hwang, V Prasad, K Cho, W Choi. 2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li-S batteries. Nature Nanotechnology, 2018, 13(6): 337–344 https://doi.org/10.1038/s41565-018-0061-y
Y Zheng, S S Zheng, H G Xue, H Pang. Metal-organic framework for lithium-sulfur batteries. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2019, 7(8): 3469–3491 https://doi.org/10.1039/C8TA11075A
16
X Xiao, L L Zou, H Pang, Q Xu. Synthesis of micro/nanoscaled metal-organic frameworks and their direct electrochemical applications. Chemical Society Reviews, 2020, 49(1): 301–331 https://doi.org/10.1039/C7CS00614D
17
J S Meng, X Liu, C J Niu, Q Pang, J T Li, F Liu, Z Liu, L Q Mai. Advances in metal-organic framework coatings: versatile synthesis and broad applications. Chemical Society Reviews, 2020, 49(10): 3142–3186 https://doi.org/10.1039/C9CS00806C
18
J J Song, Z F Huang, L Pan, K Li, X W Zhang, L Wang, J J Zou. Review on selective hydrogenation of nitroarene by catalytic, photocatalytic and electrocatalytic reactions. Applied Catalysis B: Environmental, 2018, 227: 386–408 https://doi.org/10.1016/j.apcatb.2018.01.052
19
J Zhang, H J Bai, Q Ren, H B Luo, X M Ren, Z F Tian, S Lu. Extra water- and acid-stable MOF-801 with high proton conductivity and its composite membrane for proton-exchange membrane. ACS Applied Materials & Interfaces, 2018, 10(34): 28656–28663 https://doi.org/10.1021/acsami.8b09070
20
W J Wang, Y Zhao, Y G Zhang, J Y Wang, G L Cui, M J Li, Z Bakenov, X Wang. Defect-rich multi-shelled Fe-doped Co3O4 hollow microspheres with multiple spatial confinements to facilitate catalytic conversion of polysulfides for high-performance Li-S batteries. ACS Applied Materials & Interfaces, 2020, 12(11): 12763–12773 https://doi.org/10.1021/acsami.9b21853
21
J H Zhang, Y B She. Mechanism of methanol decomposition on the Pd/WC (0001) surface unveiled by first-principles calculations. Frontiers of Chemical Science and Engineering, 2020, 14(6): 1052–1064 https://doi.org/10.1007/s11705-019-1908-y
22
J J Sun, Q Q Li, G N Chen, J G Duan, G P Liu, W Q Jin. MOF-801 incorporated PEBA mixed-matrix composite membranes for CO2 capture. Separation and Purification Technology, 2019, 217: 229–239 https://doi.org/10.1016/j.seppur.2019.02.036
23
X H Zhu, C X Yang, X P Yan. Metal-organic framework-801 for efficient removal of fluoride from water. Microporous and Mesoporous Materials, 2018, 259: 163–170 https://doi.org/10.1016/j.micromeso.2017.10.001
24
J Choi, L C Lin, J C Grossman. Role of structural defects in the water adsorption properties of MOF-801. Journal of Physical Chemistry C, 2018, 122(10): 5545–5552 https://doi.org/10.1021/acs.jpcc.8b00014
25
L M Sun, Y S Yuan, F Wang, Y L Zhao, W W Zhan, X G Han. Selective wet-chemical etching to create TiO2@MOF frame heterostructure for efficient photocatalytic hydrogen evolution. Nano Energy, 2020, 74: 104909 https://doi.org/10.1016/j.nanoen.2020.104909
26
Y Jiang, G H Ryu, S H Joo, X Chen, S H Lee, X Chen, M Huang, X Wu, D Luo, Y Huang, et al.. Porous two-dimensional monolayer metal-organic framework material and its use for the size-selective separation of nanoparticles. ACS Applied Materials & Interfaces, 2017, 9(33): 28107–28116 https://doi.org/10.1021/acsami.7b10228
27
M Wang, H Yang, K Shen, H Xu, W Wang, Z Yang, L Zhang, J Chen, Y Huang, M Chen, et al.. Stable lithium-sulfur battery based on in situ electrocatalytically formed Li2S on metallic MoS2-carbon cloth support. Small Methods, 2020, 4(9): 2000353 https://doi.org/10.1002/smtd.202000353
28
L Chen, H Yu, W X Li, M Dirican, Y Liu, X W Zhang. Interlayer design based on carbon materials for lithium-sulfur batteries: a review. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2020, 8(21): 10709–10735 https://doi.org/10.1039/D0TA03028G
29
H N Ci, J S Cai, H Mao, Z X Shi, G Cui, M L Wang, J Jin, N Wei, C Lu, W Zhao, et al.. Defective VSe2-graphene heterostructures enabling in situ electrocatalyst evolution for lithium-sulfur batteries. ACS Nano, 2020, 14(9): 11929–11938 https://doi.org/10.1021/acsnano.0c05030
30
Q Li, Q Liu, J Zhao, Y Hua, J Sun, J Duan, W Jin. High efficient water/ethanol separation by a mixed matrix membrane incorporating MOF filler with high water adsorption capacity. Journal of Membrane Science, 2017, 544: 68–78 https://doi.org/10.1016/j.memsci.2017.09.021
31
Z Zhang, J Ren, J Xu, Z Wang, W He, S Wang, X Yang, X Du, L Meng, P Zhao. Adjust the arrangement of imidazole on the metal-organic framework to obtain hybrid proton exchange membrane with long-term stable high proton conductivity. Journal of Membrane Science, 2020, 607: 118194 https://doi.org/10.1016/j.memsci.2020.118194
32
F Ke, C Peng, T Zhang, M Zhang, C Zhou, H Cai, J Zhu, X Wan. Fumarate-based metal-organic frameworks as a new platform for highly selective removal of fluoride from brick tea. Scientific Reports, 2018, 8(1): 939–950 https://doi.org/10.1038/s41598-018-19277-2
33
T L Tan, P A P Krusnamurthy, H Nakajima, S A Rashid. Adsorptive, kinetics and regeneration studies of fluoride removal from water using zirconium-based metal organic frameworks. RSC Advances, 2020, 10(32): 18740–18752 https://doi.org/10.1039/D0RA01268H
34
J F Zhang, G R Li, Y G Zhang, W Zhang, X Wang, Y Zhao, J D Li, Z W Chen. Vertically rooting multifunctional tentacles on carbon scaffold as efficient polysulfide barrier toward superior lithium-sulfur batteries. Nano Energy, 2019, 64: 103905 https://doi.org/10.1016/j.nanoen.2019.103905
35
Y Jiang, H Liu, X Tan, L Guo, J Zhang, S Liu, Y Guo, J Zhang, H Wang, W Chu. Monoclinic ZIF-8 nanosheet-derived 2D carbon nanosheets as sulfur Immobilizer for high-performance lithium sulfur batteries. ACS Applied Materials & Interfaces, 2017, 9(30): 25239–25249 https://doi.org/10.1021/acsami.7b04432
36
W X Lei, X W Wang, Y W Zhang, Z Y Luo, P T Xia, Y L Zou, Z S Ma, Y Pan, S Lin. Facile synthesis of Fe3C nano-particles/porous biochar cathode materials for lithium sulfur battery. Journal of Alloys and Compounds, 2021, 835: 157024 https://doi.org/10.1016/j.jallcom.2020.157024
37
D Wang, Q Cao, B Jing, X Wang, T Huang, P Zeng, S Jiang, Q Zhang, J Sun. A freestanding metallic tin-modified and nitrogen-doped carbon skeleton as interlayer for lithium-sulfur battery. Chemical Engineering Journal, 2020, 399: 125723 https://doi.org/10.1016/j.cej.2020.125723
38
B Y Li, Q M Su, L T Yu, J Zhang, G H Du, D Wang, D Han, M Zhang, S K Ding, B S Xu. Tuning the band structure of MoS2 via Co9S8@MoS2 core-shell structure to boost catalytic activity for lithium-sulfur batteries. ACS Nano, 2020, 14(12): 17285–17294 https://doi.org/10.1021/acsnano.0c07332
39
H J Peng, G Zhang, X Chen, Z W Zhang, W T Xu, J Q Huang, Q Zhang. Enhanced electrochemical kinetics on conductive polar mediators for lithium-sulfur batteries. Angewandte Chemie International Edition, 2016, 55(42): 12990–12995 https://doi.org/10.1002/anie.201605676
40
A E Baumann, X Han, M M Butala, V S Thoi. Lithium thiophosphate functionalized zirconium MOFs for Li-S batteries with enhanced rate capabilities. Journal of the American Chemical Society, 2019, 141(44): 17891–17899 https://doi.org/10.1021/jacs.9b09538
41
C Qi, M Cai, Z Li, J Jin, B V R Chowdari, C Chen, Z Wen. Ultrathin TiO2 surface layer coated TiN nanoparticles in freestanding film for high sulfur loading Li-S battery. Chemical Engineering Journal, 2020, 399: 125674 https://doi.org/10.1016/j.cej.2020.125674
42
Y Li, T Jiang, H Yang, D Lei, X Deng, C Hao, F Zhang, J Guo. A heterostuctured Co3S4/MnS nanotube array as a catalytic sulfur host for lithium-sulfur batteries. Electrochimica Acta, 2020, 330: 135311 https://doi.org/10.1016/j.electacta.2019.135311
43
P Ji, B Shang, Q Peng, X Hu, J Wei. α-MoO3 spheres as effective polysulfides adsorbent for high sulfur content cathode in lithium-sulfur batteries. Journal of Power Sources, 2018, 400: 572–579 https://doi.org/10.1016/j.jpowsour.2018.08.055
44
Y K Wang, R F Zhang, J Chen, H Wu, S Y Lu, K Wang, H L Li, C J Harris, K Xi, R V Kumar, S Ding. Enhancing catalytic activity of titanium oxide in lithium-sulfur batteries by band engineering. Advanced Energy Materials, 2019, 9(24): 1900953 https://doi.org/10.1002/aenm.201900953
45
J Qian, F J Wang, Y Li, S Wang, Y Y Zhao, W L Li, Y Xing, L Deng, Q Sun, L Li, F Wu, R Chen. Electrocatalytic interlayer with fast lithium-polysulfides diffusion for lithium-sulfur batteries to enhance electrochemical kinetics under lean electrolyte conditions. Advanced Functional Materials, 2020, 30(27): 2000742 https://doi.org/10.1002/adfm.202000742
46
M Y Wang, S H Hua, Z S Chao, S Y Li, B Tan, J X Lai, Z Y Guo, X L Wei, H G Jin, W B Luo, et al.. Celgard-supported LiX zeolite membrane as ion-permselective separator in lithium sulfur battery. Journal of Membrane Science, 2020, 611: 118386 https://doi.org/10.1016/j.memsci.2020.118386
47
P Chen, Z Wu, T Guo, Y Zhou, M L Liu, X F Xia, J W Sun, L Lu, X P Ouyang, X Wang, et al. Strong chemical interaction between lithium polysulfides and flame-retardant polyphosphazene for lithium-sulfur batteries with enhanced safety and electrochemical performance. Advanced Materials, 2021, 33(9): 2007549 https://doi.org/10.1002/adma.202007549
48
S T Wang, X C Li, Y Zhang, W J Zheng, Y Dai, G H He. Highly efficient polysulfide trapping and ion transferring within a hierarchical porous membrane interlayer for high-energy lithium-sulfur batteries. ACS Applied Energy Materials, 2020, 3(5): 5050–5057 https://doi.org/10.1021/acsaem.0c00629
49
J Qian, F J Wang, Y Li, S Wang, Y Y Zhao, W L Li, Y Xing, L Deng, Q Sun, L Li, et al.. Electrocatalytic interlayer with fast lithium-polysulfides diffusion for lithium-sulfur batteries to enhance electrochemical kinetics under lean electrolyte conditions. Advanced Materials, 2020, 30(27): 2000742
50
J L Yang, S X Zhao, Y M Lu, X T Zeng, W Lv, G Z Cao. ZnS spheres wrapped by an ultrathin wrinkled carbon film as a multifunctional interlayer for long life Li-S batteries. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2020, 8(1): 231–241 https://doi.org/10.1039/C9TA10560C
51
Y S He, M J Li, Y G Zhang, Z Z Shan, Y Zhao, J D Li, G H Liu, C Y Liang, Z Bakenov, Q Li. All-purpose electrode design of flexible conductive scaffold toward high performance Li-S batteries. Advanced Functional Materials, 2020, 30(19): 2000613 https://doi.org/10.1002/adfm.202000613