A novel approach in preparing polymer/nano-CaCO composites

doi:10.1007/s11705-008-0020-5

Front. Chem. Sci. Eng.

2008, Vol. 2

Issue (1) : 115-122 https://doi.org/10.1007/s11705-008-0020-5

A novel approach in preparing polymer/nano-CaCO composites

LIU Zhengying, YU Runze, YANG Mingbo, FENG Jianmin, YANG Wei, YIN Bo

College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University

Download: PDF(1177 KB) HTML
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks

Abstract An novel compounding process using nano-CaCO₃ aqueous suspension for preparing polymer/nano-CaCO₃ composites with nanoparticles dispersed at the nanoscale is reported. The process is called the mild mixing method. In this method, the pre-dispersed nanoparticle suspensions are blended with melting polymers in a weak shearing field using an extruder, followed by removing the water from the vent. The four typical polymeric nanocomposites were prepared by mild mixing method. The dispersion of nano-CaCO₃ in the matrix of the polymer at the nanoscale was confirmed by scanning electron microscopy (SEM). The molecular weights of polycarbonate (PC) and its nanocomposite showed that the degradation had not occurred during the mild mixing processing. The mechanical properties of the composite with 1.5 wt-% nano-CaCO₃ improve slightly. It proved that this approach is suitable for the preparation of nanocomposites based on both polar and non-polar polymers.

Issue Date: 05 March 2008

Cite this article:

YU Runze,LIU Zhengying,YANG Wei, et al. A novel approach in preparing polymer/nano-CaCO composites[J]. Front. Chem. Sci. Eng., 2008, 2(1): 115-122.

URL:

https://academic.hep.com.cn/fcse/EN/10.1007/s11705-008-0020-5
https://academic.hep.com.cn/fcse/EN/Y2008/V2/I1/115

1	Nielsen L E Mechanicalproperties of polymers and compositesNew YorkMarcell Dekker 1974 217239
2	Usuki A Kojima Y Kawasumi M J Synthesis of nylon6-clay hybridMater Res 1993 811791184
3	Kim G M Lee D H Hoffmann B Kressler J Stöppelmann G Influence of nanofillers onthe deformation process in layered silicate/polyamide-12 nanocompositesPolymer 2001 4210951100
4	Sinha Ray S Yamada K Okamoto M J Biodegradable polylactide/montmorillonite nanocompositesNanosci and Nanotech 2003 3503510
5	Sumita M Sakata K Hayakawa Y Double percolation effect on the electrical conductivityof conductive particles filled polymer blendsColloid Polym Sci 1992 270134139
6	Gilman J W Jackson C L Morgan A B Flammability properties of polymer-Layered-silicate nanocomposites:Polypropylene and polystyrene nanocompositesChem Mater 2000 1218661873
7	Chan C M Wu J S Polypropylene/calcium carbonatenanocompositesPolymer 2002 4329812992
8	Wang M J Effectof polymer-filler and filler-filler interactions on dynamic propertiesof filled vulcanizatesRubber Chem Technol 1998 71520589
9	Hasegawa N Okamoto H Kato M Usuki A Sato N Nylon 6/Na–montmorillonite nanocompositesprepared by compounding Nylon 6 with Na–montmorillonite slurryPolymer 2003 4429332937
10	Mishra S Sonawane S H Singh R P Studies on characterization of nano CaCO₃ prepared by the in situ depositiontechnique and its application in PP-nano CaCO₃ compositesJournal of Polymer SciencePart B: Polymer Physics 2005 43107113
11	Vu-Khanh T Sanschagrin B Fisa B Fracture of mica-reinforced polypropylene: Mica concentrationeffect. Polym.Compos 1985 6249260
12	Lozano T La fleur P G Grmela M Effect of filler dispersion on polypropylene morphologyPolym Eng Sci 2004 44880890
13	Gopakumar T G Page D J Y S Polypropylene/graphite nanocompositesby thermo-kinetic mixing. Polym Eng Sci 2004 4411621169
14	Wang G Chen X Y Huang R Nano-CaCO₃/polypropylene compositesmade with ultra-high-speed mixerJ MaterSci Lett 2002 21985986
15	Li A Jiang B Yue W Study of kneading mechanism in series disc-screw extruderPolymeric Materials Science and Engineering 2004 20610
16	Bravo V L Hrymak A N Wright J D Study of particle trajectories, residence times and flowbehavior in kneading discs of intermeshing co-rotating twin-screwextrudersPolym Eng Sci 2004 44779793
17	Tadmor Z Gogos C Principles of polymer processingNew YorkJohnWiley 1979 436
18	Kaoru M Hiroshi Y Tomohiro M Rheological behaviour of suspensions prepared from plate-shapedtitanium dioxide particles in (hydroxypropyl) methylcellulose aqueoussolutionPolym Int 2002 51253261
19	Sawyer C B Reed J S Adsorption of hydroxypropylmethyl cellulose in an aqueous system containing multicomponent oxideparticlesJ Am Ceram Soc 2001 8412411249

Viewed

Full text

Abstract

Cited

Shared

Discussed