|
|
|
Simulation of cottonseed cake melt flow in metering
zone of a single screw extruder |
| Hong HE,Jianguo ZHOU, |
| Beijing University of
Chemical and Technology, Beijing 100029, China; |
|
|
|
|
Abstract Research on the extrusion of natural polymers (food, feed, etc.) is relatively new due to the complex physicochemical transformations of raw materials, although plastics melt conveying and transport have been well studied. The structure and composition, rheological behavior as well as extrusion processing of natural polymer are much more complicated. In this study, a quasi-three-dimensional (3D) fluid flow model for non-Newtonian, non-isothermal and undeveloped temperature was developed, the model prediction being in reasonably good agreement with the experiment. Results show that the influence of moisture content, among other process variables, is the most significant, followed by screw speed. Some interaction exists between these two variables and the screw speed effect becomes marginal at high moisture contents. In addition, viscosity change in the channel was studied.
|
|
Issue Date: 05 September 2010
|
|
|
Chiruvella R V, Jaluria Y, Karwe M V. Numerical simulation of theextrusion process for food materials in a single-screw extrusion. J Food Eng, 1996, 30, 449―467
doi: 10.1016/S0260-8774(96)00022-2
|
|
Das M K, Ghoshdastidar P S. Experimental validation of a quasi-three dimensional conjugate heattransfer model for the metering section of a single-screw extruderplasticating extruder. J Mater Proc Tech, 2002, 120, 397―411
doi: 10.1016/S0924-0136(01)01178-5
|
|
Dhanasekharan K M, Kohini J L. Design and scaling of wheat dough extrusion by numerical simulationof flow and heat transfer. J Food Eng, 2003, 60, 421―430
doi: 10.1016/S0260-8774(03)00065-7
|
|
Wang H W, Guo J F, Zhou J G. The study of rheological properties ofsoybean protein dough, Journal of ChineseInstitute of Food Science and Technology, 2000, 4(1): 25―30 (in Chinese)
|
|
Shih T M. Numerical Heat Transfer. Washington D C: Hemisphere, 1984
|
|
Patanker S V. Numerical heat transfer and fluid flow. New York: McGraw-Hill, 1980
|
|
Pantankar S V, Spalding D B. A calculation procedure for heat mass and momentum transfer in three-dimensionalparabolic flow. Int J Heat Mass Trans, 1972, 15, 1787―1806
doi: 10.1016/0017-9310(72)90054-3
|
|
Schlichting H. Boundary layer theory. New York: McGraw Hill, 1979
|
|
Ghoshdastidar P S, Ghai G, Chhabra R P. Computer simulation of three-dimensionaltransport during moistened defatted soy flour processing in the meteringsection of a single-screw extruder. ProcInst Mech Eng, Part C, 2000, 214, 335―349
|
|
Zhou J G. Experimental and numerical research of cottonseed flourand meal extrusion detoxification. Dissertationfor the Doctoral Degree. Beijing: Beijing University of Chemical and Technology, 2001, 67 (in Chinese)
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
