Please wait a minute...
Frontiers of Electrical and Electronic Engineering

ISSN 2095-2732

ISSN 2095-2740(Online)

CN 10-1028/TM

Front. Electr. Electron. Eng.  2009, Vol. 4 Issue (4): 446-450   https://doi.org/10.1007/s11460-009-0062-6
  Research articles 本期目录
Plastic wastes recovery using electrostatic forces
Plastic wastes recovery using electrostatic forces
A. TILMATINE,S. BENDIMERAD,
Electrostatics and High Voltage Research Unit, IRECOM Laboratory, University of Sidi-Bel-Abbes, Sidi Bel Abbes 22000, Algeria;
 全文: PDF(210 KB)  
Abstract:Among the separation techniques used in industry, the triboelectric separation of insulating particles using rotary tube is an efficient technology employed in waste recovery and mineral industries. This process, also called free-fall triboelectric separation, is widely used for the sorting and the purification of granular materials resulting from industrial plastic wastes. This paper aims at the achievement of a comprehensive description of a laboratory triboelectric separator built up by the authors and its utilization for an experimental study carried out on granular samples containing particles of polyvinyl chloride (PVC) and polyethylene (PE). Thus, among the variable factors of the process, we analyzed the influence of the most important ones, i.e., the rotational speed of the cylinder n (rpm), the applied high voltage U (kV), the charging time of the particles t (s), the mass of the sample m (g), and the composition percentage of the sample Cp (%).
Key wordselectrostatic separation    triboelectricity    high voltage    plastic wastes
出版日期: 2009-12-05
 引用本文:   
. Plastic wastes recovery using electrostatic forces[J]. Front. Electr. Electron. Eng., 2009, 4(4): 446-450.
A. TILMATINE, S. BENDIMERAD, . Plastic wastes recovery using electrostatic forces. Front. Electr. Electron. Eng., 2009, 4(4): 446-450.
 链接本文:  
https://academic.hep.com.cn/fee/CN/10.1007/s11460-009-0062-6
https://academic.hep.com.cn/fee/CN/Y2009/V4/I4/446
Inculet I I, Castle G S P, Brown J D. Electrostatic separation of plastics for recycling. Particulate Science and Technology, 1998, 16(1): 91―100

doi: 10.1080/02726359808906787
Iuga A, Morar R, Samuila A, Dascalescu L. Electrostaticseparation of metals and plastics from granular industrial wastes. IEE Proceedings – Science, Measurement andTechnology, 2001, 148(2): 47―54

doi: 10.1049/ip-smt:20010356
Dascalescu L, Morar R, Iuga A, Samuila A, Neamtu V. Electrostatic separationof insulating and conductive particles from granular mixes. Particulate Science and Technology, 1998, 16(1): 25―42

doi: 10.1080/02726359808906782
Lawver J E, Dyrenforth W P. Electrostatic separation. In: Moore A D, ed. Electrostatics and Its Applications. New York: Wiley, 1973, 221―249
Higashiyama Y, Asano K. Recent progress in electrostaticseparation technology. Particulate Scienceand Technology, 1998, 16(1): 77―90

doi: 10.1080/02726359808906786
Dance A D, Kojovic T, Morrison R D. Development of electrostatic separation models for themineral sands industry. In: Proceedingsof Extractive Metallurgy. Perth, 1991, 13―18
Haga K. Applicationsof the electrostatic separation technique. In: Chang J S, Kelly A J, Crowley J M, eds. Handbook of Electrostatic Processes. New York: Dekker, 1995, 365―386
Ralston O C. Electrostatic Separation of Mixed Granular Solids. Amsterdam: Elsevier, 1961
Finseth D H, Gerstler W. Triboelectrostatic coal separators:design and development. In: 10th Korea-USAJoint Workshop on Coal Utilization Technology. 1994, v-5
Inculet I I, Castle G S P. Tribo-electrification ofcommercial plastics in air. In: Proceedings of the 8th InternationalConference on Electrostatics. Instituteof Physics Conference Series. Oxford, 1991, 118: 217―222
Inculet I I, Castle G S P, Brown J D. Tribo-electrification system for electrostatic separationof plastics. In: Proceedings of IndustryApplications Society Annual Meeting. 1994, 2: 1397―1399

doi: 10.1109/IAS.1994.377605
Soong Y, Link T A, Schoffstall M R, Tur?ániová ?, Balá? P, Marchant S, Schehl R R. Triboelectrostatic separationof mineral matter from slovakian coals. Acta Montanistica Slovaca, 1998, 3: 393―400
Medles K, Dascalescu L, Tilmatine A, Bendaoud A, Younes M. Experimental modeling ofthe electrostatic separation of granular materials. Particulate Science and Technology, 2007, 25(2): 163―171

doi: 10.1080/02726350701257816
Younes M, Tilmatine A, Medles K, Rahli M, Dascalescu L. Numerical modeling of conductiveparticle trajectories in roll-type corona-electrostatic separators. IEEE Transactions on Industry Applications, 2007, 43(5): 1130―1136

doi: 10.1109/TIA.2007.904363
Dascalescu L, Samuila A, Mihalcioiu A, Bente S, Tilmatine A. Robust design of electrostaticseparation processes. IEEE Transactionson Industry Applications, 2005, 41(3): 715―720

doi: 10.1109/TIA.2005.847308
Mihailescu M, Samuila A, Urs A, Morar R, Iuga A, Dascalescu L. Computer-assistedexperimental design for the optimisation of electrostatic separationprocesses. IEEE Transactions on IndustryApplications, 2002, 38(5): 1174―1181

doi: 10.1109/TIA.2002.802897
Medles K, Tilmatine A, Miloua F, Bendaoud A, Younes M, Rahli M, Dascalescu L. Setpoint identification and robustness testing of electrostatic separationprocesses. IEEE Transactions on IndustryApplications, 2007, 43(3): 618―626

doi: 10.1109/TIA.2007.895683
Younes M, Tilmatine A, Medles K, Dascalescu L. Fuzzycontrol of an electrostatic separation process. IEEE Transactions on Industry Applications, 2008, 44(1): 9―14

doi: 10.1109/TIA.2007.912802
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed