1. School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China 2. State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China 3. Key Laboratory of Hunan Province for Clean and Efficient Utilization of Strategic Calcium-containing Mineral Resources, Central South University, Changsha 410083, China
• US tin use decreases as the GDP value added by manufacturing sector increases.
• Global and China’s tin use increases as the GDP added by manufacturing increases.
• A sigmoid curve can fit the US tin use data well.
• US tin use patterns is not due to the finite tin reserves or resources.
• Policies, substitutions, etc. play key roles in the changing tin use patterns.
Tin is of key importance to daily life and national security; it is considered an essential industrial metal. The United States (US) is the world’s largest economy and consumer of natural resources. Therefore, the analysis of historical tin use in the US is helpful for understanding future tin use trends in the world as a whole and in developing countries. Time series analysis, regression analysis with GDP or GDP/capita, and historical data fitted with logistic and Gompertz models are employed in this study. Historical tin use in the US shows three stages—increase-constant-decrease, as GDP per capita has increased. Tin use in the US is negatively correlated with the GDP value added by the manufacturing sector, while the use of tin worldwide and in China continues to increase along with the GDP value added by the manufacturing sector. Although a sigmoid curve can fit the US tin use data well, that use is not directly related to the limited tin reserves or resources. Rather, policies, economic restructuring, substitutions, new end-use markets, etc. have played key roles in the changing tin use patterns. This work contributes to understanding future tin use at both the global and national levels: tin use will continue to increase with GDP at the global level, but use patterns of tin at the national level can be changed through human intervention.
. [J]. Frontiers of Environmental Science & Engineering, 2021, 15(6): 118.
Congren Yang, Xianlai Zeng, Haodong Li, Zuyuan Tian, Wei Liu, Wenqing Qin, Jinhui Li. Uncovering the evolution of tin use in the United States and its implications. Front. Environ. Sci. Eng., 2021, 15(6): 118.
C Amy, D Budenstein, M Bagepalli, D England, F Deangelis, G Wilk, C Jarrett, C Kelsall, J Hirschey, H Wen, A Chavan, B Gilleland, C Yuan, W C Chueh, K H Sandhage, Y Kawajiri, A Henry (2017). Pumping liquid metal at high temperatures up to 1673 kelvin. Nature, 550(7675): 199–203 https://doi.org/10.1038/nature24054
2
C P Baldé, V Forti, V Gray, R Kuehr, P Stegmann (2017). The Global E-waste Monitor 2017: Quantities, Flows and Resources.Bonn, Geneva, and Vienna: United Nations University, International Telecommunication Union, and International Solid Waste Association
3
C P Baldé, F Wang, R Kuehr, J Huisman (2015). The global e-waste monitor – 2014, United Nations University, IAS – SCYCLE, Bonn, Germany
4
The Bureau of Economic Analysis. Washengton, DC;
5
P Caithamer (2008). Regression and Time Series Analysis of the World Oil Peak of Production: Another Look. Mathematical Geosciences, 40(6): 653–670 https://doi.org/10.1007/s11004-008-9159-3
W Q Chen (2013). Recycling rates of aluminum in the United States. Journal of Industrial Ecology, 17(6): 926–938 https://doi.org/10.1111/jiec.12070
8
W Q Chen (2018). Dynamic product-level analysis of in-use aluminum stocks in the United States. Journal of Industrial Ecology, 22(6): 1425–1435 https://doi.org/10.1111/jiec.12710
9
W Q Chen, T E Graedel (2012). Dynamic analysis of aluminum stocks and flows in the United States: 1900–2009. Ecological Economics, 81: 92–102 https://doi.org/10.1016/j.ecolecon.2012.06.008
10
W Q Chen, T E Graedel, P Nuss, H Ohno (2016b). Building the material flow networks of aluminum in the 2007 US economy. Environmental Science & Technology, 50(7): 3905–3912 https://doi.org/10.1021/acs.est.5b05095
11
W Cheng, N Singh, W Elliott, J Lee, A Rassoolkhani, X Jin, E W Mcfarland, S Mubeen (2018). Earth-abundant tin sulfide-based photocathodes for solar hydrogen production. Advancement of Science, 5(1): 1700362 https://doi.org/10.1002/advs.201700362
12
Y S Choi, Y W Byeon, J H Park, J H Seo, J P Ahn, J C Lee (2018). Ultrafast sodiation of single-crystalline Sn anodes. ACS Applied Materials & Interfaces, 10(1): 560–568 https://doi.org/10.1021/acsami.7b14680
13
CNIA (2018). The Yearbook of Nonferrous Metals Industry of China (1991–2017). Beijing: China Nonferrous Metals Industry Association
A Elshkaki, T E Graedel, L Ciacci, B K Reck (2016). Copper demand, supply, and associated energy use to 2050. Global Environmental Change, 39: 305–315 https://doi.org/10.1016/j.gloenvcha.2016.06.006
16
A Elshkaki, B K Reck, T E Graedel (2017). Anthropogenic nickel supply, demand, and associated energy and water use. Resources, Conservation and Recycling, 125: 300–307 https://doi.org/10.1016/j.resconrec.2017.07.002
17
H H Fang, S Adjokatse, S Shao, J Even, M A Loi (2018). Long-lived hot-carrier light emission and large blue shift in formamidinium tin triiodide perovskites. Nature Communications, 9: 243 https://doi.org/10.1038/s41467-017-02684-w
18
H Ghosh, S Mitra, S Dhar, A Nandi, S Majumdar, H Saha, S K Datta, C Banerjee (2017). Light-harvesting properties of embedded tin oxide nanoparticles for partial rear contact silicon solar cells. Plasmonics, 12(6): 1761–1772 https://doi.org/10.1007/s11468-016-0443-7
R B Gordon, M Bertram, T E Graedel (2006). Metal stocks and sustainability. Proceedings of the National Academy of Sciences of the United States of America, 103(5): 1209–1214 https://doi.org/10.1073/pnas.0509498103
21
M Gorman, D Dzombak (2020). Stocks and flows of copper in the US: Analysis of circularity 1970–2015 and potential for increased recovery. Resources, Conservation and Recycling, 153: 104542 https://doi.org/10.1016/j.resconrec.2019.104542
22
T E Graedel, J Cao (2010). Metal spectra as indicators of development. Proceedings of the National Academy of Sciences of the United States of America, 107(49): 20905–20910 https://doi.org/10.1073/pnas.1011019107
23
T E Graedel, E M Harper, N T Nassar, P Nuss, B K Reck (2015). Criticality of metals and metalloids. Proceedings of the National Academy of Sciences of the United States of America, 112(14): 4257–4262 https://doi.org/10.1073/pnas.1500415112
24
K Halada, M Shimada, K Ijima (2008a). Decoupling status of metal consumption from economic growth. Materials Transactions, 49(3): 411–418 https://doi.org/10.2320/matertrans.ML200705
25
K Halada, M Shimada, K Ijima (2008b). Forecasting of the consumption of metals up to 2050. Materials Transactions, 49(3): 402–410 https://doi.org/10.2320/matertrans.ML200704
26
J W Heo, A Banerjee, K H Park, Y S Jung, S T Hong (2018). New Na-ion solid electrolytes Na4-xSn1-xSbxS4 (0.02≤x≤0.33) for all-solid-state Na-ion batteries. Advanced Energy Materials, 8(11): 1702716 https://doi.org/10.1002/aenm.201702716
27
C Hiraiwa, H Tawarayama, H Ota, T Higashino, K Okuno, M Majima (2017). Long-term stability of Ni–Sn porous metals for cathode current collector in solid oxide fuel cells. International Journal of Hydrogen Energy, 42(17): 12567–12573 https://doi.org/10.1016/j.ijhydene.2017.04.007
28
M Höök, J Li, N Oba, S Snowden (2011). Descriptive and predictive growth curves in energy system analysis. Natural Resources Research, 20(2): 103–116 https://doi.org/10.1007/s11053-011-9139-z
29
M Höök, W Zittel, J Schindler, K Aleklett (2010). Global coal production outlooks based on a logistic model. Fuel, 89(11): 3546–3558 https://doi.org/10.1016/j.fuel.2010.06.013
30
L Hu, X F Song, S L Zhang, H B Zeng, X J Zhang, R Marks, D Shan (2018). MoS2 nanoparticles coupled to SnS2 nanosheets: The structural and electronic modulation for synergetic electrocatalytic hydrogen evolution. Journal of Catalysis, 366: 8–15 https://doi.org/10.1016/j.jcat.2018.07.029
31
J Hughes, L P Cain (2010). American Economic History (8th edition). USA: Pearson Series in Economics) New York: McGraw-Hill
32
International Tin Association (2017). Tin in lead-acid batteries: Impact on future tin use, https://www.internationaltin.org/it-reports/
33
International Trade Centre.Firms and Trade Support Institutions
34
C F Izard, D B Müller (2010). Tracking the devil’s metal: Historical global and contemporary U.S. tin cycles. Resources, Conservation and Recycling, 54(12): 1436–1441 https://doi.org/10.1016/j.resconrec.2010.06.008
35
H Ju, D Park, J Kim (2018). Fabrication of polyaniline-coated SnSeS nanosheet/polyvinylidene difluoride composites by a solution-based process and optimization for flexible thermoelectrics. ACS Applied Materials & Interfaces, 10(14): 11920–11925 https://doi.org/10.1021/acsami.7b19667
36
R Kahhat, E Williams (2012). Materials flow analysis of e-waste: Domestic flows and exports of used computers from the United States. Resources, Conservation and Recycling, 67: 67–74 https://doi.org/10.1016/j.resconrec.2012.07.008
37
M Kamal, A El-Bediwi, A R Lashin, A H El-Zarka (2011). Copper effects in mechanical properties of rapidly solidified Sn–Pb–Sb Babbitt bearing alloys. Materials Science and Engineering A, 530: 327–332 https://doi.org/10.1016/j.msea.2011.09.092
38
R J Kamilli, B E Kimball, J F Jr Carlin (2017). Tin, Chapter. S of Schulz, K.J., DeYoung, J.H., Jr., Seal, R.R., II, and Bradley, D.C., eds. Critical Mineral Resources of the United States—Economic and Environmental Geology and Prospects for Future Supply: U.S. Geological Survey Professional Paper 1802, p. S1–S53, https://doi.org/10.3133/pp1802S
39
K J III Kreder, B T Heligman, A Manthiram (2017). Interdigitated eutectic alloy foil anodes for rechargeable batteries. ACS Energy Letters, 2(10): 2422–2423 https://doi.org/10.1021/acsenergylett.7b00844
40
R Lin, K Xiao, Z Qin, Q Han, C Zhang, M Wei, M I Saidaminov, Y Gao, J Xu, M Xiao, A Li, J Zhu, E H Sargent, H Tan (2019). Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(ii) oxidation in precursor ink. Nature Energy, 4(10): 864–873 https://doi.org/10.1038/s41560-019-0466-3
41
J F Liu, S T Wang, K Kravchyk, M Ibanez, F Krumeich, R Widmer, D Nasiou, M Meyns, J Llorca, J Arbiol, M V Kovalenko, A Cabot (2018a). SnP nanocrystals as anode materials for Na-ion batteries. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 6(23): 10958–10966 https://doi.org/10.1039/C8TA01492B
42
S H Liu, N K Sun, M Liu, S Sucharitakul, X P A Gao (2018b). Nanostructured SnSe: Synthesis, doping, and thermoelectric properties. Journal of Applied Physics, 123(11): 115109 https://doi.org/10.1063/1.5018860
43
M C Lucchetta, F Saporiti, F Audebert (2019). Improvement of surface properties of an Al–Sn–Cu plain bearing alloy produced by rapid solidification. Journal of Alloys and Compounds, 805: 709–717 https://doi.org/10.1016/j.jallcom.2019.07.082
44
V Maheskumar, P Gnanaprakasam, T Selvaraju, B Vidhya (2018). Investigation on the electrocatalytic activity of hierarchical flower like architectured Cu3SnS4 for hydrogen evolution reaction. Journal of Electroanalytical Chemistry (Lausanne, Switzerland), 826: 38–45 https://doi.org/10.1016/j.jelechem.2018.07.027
45
D Mcgroarty, S Wirtz (2012). Reviewing risk: Critical minerals and national security. American Resources Policy Network, 34
46
R Memary, D Giurco, G Mudd, L Mason (2012). Life cycle assessment: A time-series analysis of copper. Journal of Cleaner Production, 33(Supplement C): 97–108 https://doi.org/10.1016/j.jclepro.2012.04.025
47
S Mohr, M Höök, G Mudd, G Evans (2011). Projection of long-term paths for Australian coal production—Comparisons of four models. International Journal of Coal Geology, 86(4): 329–341 https://doi.org/10.1016/j.coal.2011.03.006
48
J Namias (2013). The Future of Electronic Waste Recycling in the United States: Obstacles and Domestic Solutions. New York: Columbia University
49
National Bureau of Statistics.Beijing
50
D T Nguyen, S W Song (2017). Magnesium stannide as a high-capacity anode for magnesium-ion batteries. Journal of Power Sources, 368: 11–17 https://doi.org/10.1016/j.jpowsour.2017.09.054
51
N K Noel, S D Stranks, A Abate, C Wehrenfennig, S Guarnera, A A Haghighirad, A Sadhanala, G E Eperon, S K Pathak, M B Johnston, A Petrozza, L M Herz, H J Snaith (2014). Lead-free organic-inorganic tin halide perovskites for photovoltaic applications. Energy & Environmental Science, 7(9): 3061–3068 https://doi.org/10.1039/C4EE01076K
52
P Nuss, W Q Chen, H Ohno, T E Graedel (2016). Structural investigation of aluminum in the US economy using network analysis. Environmental Science & Technology, 50(7): 4091–4101 https://doi.org/10.1021/acs.est.5b05094
53
H Ohno, P Nuss, W Q Chen, T E Graedel (2016). Deriving the metal and alloy networks of modern technology. Environmental Science & Technology, 50(7): 4082–4090 https://doi.org/10.1021/acs.est.5b05093
54
J T Powell, M R Chertow (2019). Quantity, components, and value of waste materials landfilled in the United States. Journal of Industrial Ecology, 23(2): 466–479 https://doi.org/10.1111/jiec.12752
55
J Qin, T Wang, D Liu, E Liu, N Zhao, C Shi, F He, L Ma, C He (2018). A top-down strategy toward SnSb in-plane nanoconfined 3D N-doped porous graphene composite microspheres for high performance Na-ion battery anode. Advanced Materials, 30(9): 1704670 https://doi.org/10.1002/adma.201704670
56
H Qu, X Lu, M Skorobogatiy (2018). All-solid flexible fiber-shaped lithium ion batteries. Journal of the Electrochemical Society, 165(3): A688–A695 https://doi.org/10.1149/2.1001803jes
57
D Raabe, C C Tasan, E A Olivetti (2019). Strategies for improving the sustainability of structural metals. Nature, 575(7781): 64–74 https://doi.org/10.1038/s41586-019-1702-5
58
S Ranjan Sahu, V Rao Rikka, P Haridoss, R Gopalan, R Prakash (2019). Superior cycling and rate performance of micron-sized Tin using aqueous-based binder as a sustainable anode for lithium-ion batteries. Energy Technology (Weinheim), 7(11): 1900849 https://doi.org/10.1002/ente.201900849
J R Rustad (2012). Peak nothing: Recent trends in mineral resource production. Environmental Science & Technology, 46(3): 1903–1906 https://doi.org/10.1021/es203065g
61
M Schreier, F Héroguel, L Steier, S Ahmad, J S Luterbacher, M T Mayer, J Luo, M Grätzel (2017). Solar conversion of CO2 to CO using Earth-abundant electrocatalysts prepared by atomic layer modification of CuO. Nature Energy, 2(7): 17087 https://doi.org/10.1038/nenergy.2017.87
62
B K Sovacool, S H Ali, M Bazilian, B Radley, B Nemery, J Okatz, D Mulvaney (2020). Sustainable minerals and metals for a low-carbon future. Science, 367(6473): 30–33 https://doi.org/10.1126/science.aaz6003
63
Z Y Tu, S Choudhury, M J Zachman, S Y Wei, K H Zhang, L F Kourkoutis, L A Archer (2018). Fast ion transport at solid-solid interfaces in hybrid battery anodes. Nature Energy, 3(4): 310–316 https://doi.org/10.1038/s41560-018-0096-1
64
USGS (2017). Tin Statistics and Information. (accessed September 25, 2017)
P Walan, S Davidsson, S Johansson, M Höök (2014). Phosphate rock production and depletion: Regional disaggregated modeling and global implications. Resources, Conservation and Recycling, 93(Supplement C): 178–187 https://doi.org/10.1016/j.resconrec.2014.10.011
67
M X Wang, W Chen, X Li (2015). Substance flow analysis of copper in production stage in the US from 1974 to 2012. Resources, Conservation and Recycling, 105: 36–48 https://doi.org/10.1016/j.resconrec.2015.10.012
68
M X Wang, Y N Liang, M Yuan, X D Cui, Y Q Yang, X Li (2018a). Dynamic analysis of copper consumption, in-use stocks and scrap generation in different sectors in the US 1900–2016. Resources, Conservation and Recycling, 139: 140–149 https://doi.org/10.1016/j.resconrec.2018.07.022
69
X Wang, Y Ruan, S Feng, S Chen, K Su (2018b). Ag clusters anchored conducting polyaniline As highly efficient cocatalyst for Cu2ZnSnS4 nanocrystals toward enhanced photocatalytic hydrogen generation. ACS Sustainable Chemistry & Engineering, 6(9): 11424–11432 https://doi.org/10.1021/acssuschemeng.8b01364
70
WB (2020). Global Economic Prospects: Slow Growth, Policy Challenges (January 2020). Washington, DC: World Bank
71
H Wu, X Lu, G Wang, K Peng, H Chi, B Zhang, Y Chen, C Li, Y Yan, L Guo, C Uher, X Zhou, X Han (2018). Sodium-doped Tin sulfide single crystal: A nontoxic Earth-abundant material with high thermoelectric performance. Advanced Energy Materials, 8(20): 1800087 https://doi.org/10.1002/aenm.201800087
72
C R Yang, Q Y Tan, L L Liu, Q Y Dong, J H Li (2017). Recycling Tin from electronic waste: A problem that needs more attention. ACS Sustainable Chemistry & Engineering, 5(11): 9586–9598 https://doi.org/10.1021/acssuschemeng.7b02903
73
C R Yang, Q Y Tan, X L Zeng, Y P Zhang, Z S Wang, J H Li (2018). Measuring the sustainability of tin in China. Science of the Total Environment, 635: 1351–1359 https://doi.org/10.1016/j.scitotenv.2018.04.073
74
Z Yu, S L Shang, Y Gao, D Wang, X Li, Z K Liu, D Wang (2018). A quaternary sodium superionic conductor—Na10.8Sn1.9PS11.8. Nano Energy, 47: 325–330 https://doi.org/10.1016/j.nanoen.2018.01.046
75
X Zeng, S H Ali, J Tian, J Li (2020). Mapping anthropogenic mineral generation in China and its implications for a circular economy. Nature Communications, 11(1): 1544 https://doi.org/10.1038/s41467-020-15246-4
76
Y Zhang, X L Zhang, A M Bond, J Zhang (2018). Identification of a new substrate effect that enhances the electrocatalytic activity of dendritic tin in CO2 reduction. Physical Chemistry Chemical Physics, 20(8): 5936–5941 https://doi.org/10.1039/C7CP07723H
77
X Zheng, R Wang, R Wood, C Wang, E G Hertwich (2018). High sensitivity of metal footprint to national GDP in part explained by capital formation. Nature Geoscience, 11(4): 269–273 https://doi.org/10.1038/s41561-018-0091-y
78
Y X Zhu, K Syndergaard, D R Cooper (2019). Mapping the annual flow of steel in the United States. Environmental Science & Technology, 53(19): 11260–11268 https://doi.org/10.1021/acs.est.9b01016
