Flow characteristics of single-phase flow in
narrow annular channels
Flow characteristics of single-phase flow in
narrow annular channels
ZENG Heyi1, SU Guanghui2, JIA Dounan2
1.School of Energy and Power Engineering, Xi'an Jiaotong University；College of Nuclear Science and Technology, Harbin Engineering University; 2.School of Energy and Power Engineering, Xi'an Jiaotong University;
Abstract：The characteristics of single-phase flow in narrow annular channels were analyzed and theoretical model was proposed. Based on the present model, the theoretical calculation was performed to predict the flow characteristics for the developed flow in narrow annuli with the gap sizes of 1.0, 1.5 and 2.0 mm, respectively. The results were in good agreement with the experimental data. In addition, the gap size of narrow annuli has great impact upon the flow characteristics. The decrease of gap size reduces friction factor. The higher the Reynolds number, the more remarkable the effect of gap size upon friction coefficient during single-phase flowing through narrow annular channels. The effect of gap size upon friction coefficient is dependent on the Reynolds number, and will decrease with the decrease of the Reynolds number.
出版日期: 2008-12-05
引用本文:
. Flow characteristics of single-phase flow in
narrow annular channels[J]. Frontiers of Energy and Power Engineering in China, 2008, 2(4): 466-470.
ZENG Heyi, SU Guanghui, JIA Dounan. Flow characteristics of single-phase flow in
narrow annular channels. Front. Energy, 2008, 2(4): 466-470.
Li B, He A D, Wand Y S, et al.. An experimental investigation on the flow andheat transfer of the narrow-gap tube vapor generators: Friction resistance. Chemical Engineering & Machinery, 2001, 28(2): 67–70 (in Chinese)
2
Sun Z N, Sun L C, Yan C Q, et al.. Experimental investigation of single-phase flowfriction in narrow annuli. Nuclear PowerEngineering, 2004, 25(2): 123–127 (in Chinese)
3
Sun L C, Yan C Q, Sun Z N . Experimental study on forced water flow resistance innarrow annulus. Nuclear Power Engineering, 2003, 24(4): 359–362 (in Chinese)
4
Peng C H . Experimental study of two-phase flow and boiling heat transfer ofwater in the vertical narrow annuli. Dissertationfor the Doctoral Degree. Xi'an: Xi'an Jiaotong University, 2005 (in Chinese)
5
Wu G . Experimentalstudy on heat transfer and flow characteristics of single-phase waterand superheated vapor in narrow annular channel. Dissertation for the Master's Degree. Xi'an: Xi'an Jiaotong University,China, 2005 (in Chinese)
6
Warrier G R, Dhir V K, Momoda L A . Heat transfer and pressure drop in narrow rectangularchannels. Experimental Thermal and FluidScience, 2002 26(1): 53–64. doi:10.1016/S0894-1777(02)00107-3
7
Peng X F, Peterson G P . Convective heat transferand flow friction for water flow in microchannel structures. International Journal of Heat and Mass Transfer, 1996, 39(12): 2599–2608. doi:10.1016/0017-9310(95)00327-4
8
Xin M D, Shi J S . Experiments on forced convectiveheat transfer performance in rectangular microchannels. Journal of Chongqing University, 1994, 17(3): 117–122 (in Chinese)
9
Rehme K . Turbulentflow in smooth concentric annuli with small radius ratios. J Fluid Mech, 1974, 64: 263–287. doi:10.1017/S0022112074002394
10
Kays W M, Leung K T . Heat transfer in annularpassages-hydrodynamically developed turbulent flow with arbitrarilyprescribed heat flux. International Journalof Heat and Mass Transfer, 1963, 6(7): 537–557. doi:10.1016/0017-9310(63)90012-7
11
Churchill S W, Chan C . Theoretically based correlatingequations for the local characteristics of fully turbulent flow inround tubes and between parallel plates. Industrial & Engineering Chemistry Research, 1995, 34(4): 1332–1341. doi:10.1021/ie00043a039
12
Kaneda M, Yu B, Ozoe H, et al.. The characteristics of turbulent flow and convectionin concentric circular annuli: flow. InternationalJournal of Heat and Mass Transfer, 2003, 46(26): 5045–5057. doi:10.1016/S0017-9310(03)00365-X
