|
|
|
Numerical investigation and analysis of heat
transfer enhancement in channel by longitudinal vortex based on field
synergy principle |
| TAO Wenquan1, WU Junmei2 |
| 1.State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University; 2.School of Environment and Chemical Engineering, Xi'an Polytechnic University; State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University; |
|
|
|
|
Abstract 3-D numerical simulations were presented for laminar flow and heat transfer characteristics in a rectangular channel with vortex generators. The effects of Reynolds number (from 800 to 3 000), the attack angle of vortex generator (from 15° to 90°) and the shape of vortex generator were examined. The numerical results were analyzed based on the field synergy principle. It is found that the inherent mechanism of the heat transfer enhancement by longitudinal vortex can be explained by the field synergy principle, that is, the second flow generated by vortex generators results in the reduction of the intersection angle between the velocity and fluid temperature gradient. The longitudinal vortex improves the field synergy of the large downstream region of longitudinal vortex generator (LVG) and the region near (LVG); however, transverse vortex only improves the synergy of the region near vortex generator. Thus, longitudinal vortex can enhance the integral heat transfer of the flow field, while transverse vortex can only enhance the local heat transfer. The synergy angle decreases with the increase of Reynolds number for the channel with LVG to differ from the result obtained from the plain channel, and the triangle winglet performs better than the rectanglar one under the same surface area condition.
|
|
Issue Date: 05 March 2008
|
|
| 1 |
Biswas G Mitra N K Fiebig M Computation of laminar mixed convection flow in a channelwith wing type built-in obstaclesJ Thermophys 1989 3447453
|
| 2 |
Biswas G Chattopadhyay H Heat transfer in a channelwith built-in wing type vortex generatorsInt J Heat Mass Transfer 1992 35803914.
doi:10.1016/0017‐9310(92)90248‐Q
|
| 3 |
Biswas G Torii K Fuji D et al.Numerical and experimental determination of flowstructure and heat transfer effects of longitudinal vortices in achannel flowInt J Heat Mass Transfer 1996 39(16)34413451.
doi:10.1016/0017‐9310(95)00398‐3
|
| 4 |
Sohankar A Davidson L Effect of inclined vortex generatorson heat transfer enhancement in a three-dimensional channelNum Heat Transfer, Part A 2001 39443448
|
| 5 |
Chung J D Park B K Lee J S The combined effects of angle of attack and louver angleof a winglet pair on heat transfer enhancementJ Enhanced Heat Transfer 2003 10(1)3143.
doi:10.1615/JEnhHeatTransf.v10.i1.40
|
| 6 |
Fiebig M Sanchez M A Enhancement of Heat Transferand Pressure Loss by Winglet Vortex Generators in a Fin-Tube ElementNew YorkHTD,ASME 1992 201414
|
| 7 |
Biswas G Mitra N K Fiebig M Heat transfer enhancement in fin-tube heat exchanger bywinglet type vortex generatorsInt J HeatMass Transfer 1994 37283291.
doi:10.1016/0017‐9310(94)90099‐X
|
| 8 |
Guo Z Y Tao W Q Shah R K The field synergy (coordination) principle and its applicationsin enhancing single phase convective heat transferInt J Heat Mass Transfer 2005 48(9)17971807.
doi:10.1016/j.ijheatmasstransfer.2004.11.007
|
| 9 |
Tao Wenquan Numerical Heat Transfer (in Chinese), 2nd EdXi'anXi'an Jiaotong UniversityPress 2001 34(in Chinese)
|
| 10 |
Fiebig M Vorticesand heat transferZAMM Z Angew Math Mech 1997 77(1)318.
doi:10.1002/zamm.19970770103
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
