Convective mass transfer from a horizontal rotating
cylinder in a slot air jet flow

doi:10.1007/s11708-009-0019-8

Front. Energy

2009, Vol. 3

Issue (3) : 289-296 https://doi.org/10.1007/s11708-009-0019-8

Research articles

Convective mass transfer from a horizontal rotating cylinder in a slot air jet flow

Hongting MA ¹, Dandan MA ², Na YANG ²,

1.School of Environmental Science and Technology, Tianjin University, Tianjin 300072, China; 2.School of Materials Science and Chemical Technology, Tianjin University of Technology, Tianjin 300072, China;

Download: PDF(189 KB)
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks

Abstract The effects of air jet impinging on the mass transfer characteristics from a rotating spinning cylinder surface were experimentally investigated. The effects of rotational Reynolds number "Graphic"

, jet-exit Reynolds number "Graphic"

, the nozzle width-to-cylinder diameter ratio "Graphic"

, and the ratio of the distance between nozzle exit and the front of cylinder to nozzle width "Graphic"

on the mean "Graphic"

were determined. The phenomena of the first and second critical point was analyzed and validated. On the basis of experimental data, the correlation equation was obtained.

Keywords air jet impinging rotating cylinder critical point mass transfer characteristics

Issue Date: 05 September 2009

Cite this article:

Hongting MA,Dandan MA,Na YANG. Convective mass transfer from a horizontal rotating cylinder in a slot air jet flow[J]. Front. Energy, 2009, 3(3): 289-296.

URL:

https://academic.hep.com.cn/fie/EN/10.1007/s11708-009-0019-8
https://academic.hep.com.cn/fie/EN/Y2009/V3/I3/289

	Mujumdar A S, Li Y K, Douglas W L M. Evaporation under and impinging jet: a numerical model. The Canadian Journal of Chemical Engineering, 1980, 58(4): 448―453 doi: 10.1002/cjce.5450580405
	Narayanan V, Yagoobi J S, Page R H. An experimental study of fluid mechanics and heat transferin an impinging slot jet flow. InternationalJournal of Heat and Mass Transfer, 2004, 47(8,9): 1827―1845
	Beitebmal A H, SaadM A, Patel C D. The effect of inclination on the heat transfer betweena flat surface and an impinging two-dimensional air jet. International Journal of Heat and Fluid Flow, 2000, 21(2): 156―163 doi: 10.1016/S0142-727X(99)00080-6
	Travnicek Z, Tesar V. Annular synthetic jet usedfor impinging flow mass-transfer. InternationalJournal of Heat and Mass Transfer, 2003, 46(17): 3291―3297 doi: 10.1016/S0017-9310(03)00119-4
	Olsson E E M, Ahrne L M, Tragardh A C. Heat transfer from a slot air jet impinging of a circularcylinder. Journal of Food Engineering, 2004, 63(4): 393―401 doi: 10.1016/j.jfoodeng.2003.08.009
	Rahimi M, Owen I, Mistry J. Heat transfer between an expanded jet and a cylindersurface. International Journal of Heatand Mass Transfer, 2003, 46(17): 3135―3142 doi: 10.1016/S0017-9310(03)00116-9
	Cho H H, Jabbari M Y, Goldstein R J. Mass-transfer with flow through an array of rectangularcylinders. ASME J Heat Transfer, 1994, 116(4): 904―912 doi: 10.1115/1.2911465
	Zhang Ximin, Li Xun, Wang Zesheng, et al. A study for heat transfer relationship of airjet impinging of a horizontal rotating cylinder. Journal of Engineering Thermophysics, 1990, 11(2): 178―181
	McDaniel C S, Webb B W. Slot jet impingement heattransfer from circular cylinder. InternationalJournal of Heat and Mass Transfer, 2000, 43(11): 1975―1985 doi: 10.1016/S0017-9310(99)00267-7
	Labraga L, Berkah T. Mass transfer from a rotatingcylinder with and without crossflow. InternationalJournal of Heat and Mass Transfer, 2004, 47(10,11): 2493―2499
	Braud L M, Moreira R G, Castell-Perea M E. Mathematical modeling of impingementdrying of corn tortillas. Journal of FoodEngineering, 2001, 50(3): 121―128 doi: 10.1016/S0260-8774(00)00234-X
	Kendoush A A. An approximate solution of the convective heat transfer from an isothermalrotating cylinder. Int J Heat and FluidFlow, 1996, 17(4): 439―441 doi: 10.1016/0142-727X(95)00002-8
	Garim M M, Freire J T, Goldstein R T. Local mass transfer coefficients around a cylinder ina fluidized bed. Powder Technology, 1999, 101(2): 134―141 doi: 10.1016/S0032-5910(98)00164-8
	Yang Qiangsheng. Convective Heat and Mass Transfer. Beijing: High Education Press, 1985 (in Chinese)

Viewed

Full text

Abstract

Cited

Shared

Discussed