|
|
|
Energy systems engineering: methodologies and
applications |
| Pei LIU1,Efstratios N. PISTIKOPOULOS1,Zheng LI2, 3, |
| 1.Centre for Process Systems
Engineering (CPSE), Department of Chemical Engineering, Imperial College
London, London SW7 2AZ, UK; 2.State Key Laboratory
of Power Systems, Department of Thermal Engineering, Tsinghua University,
Beijing 100084, China; 3.2010-07-06 15:13:10; |
|
|
|
Abstract Energy systems are the major contributor to ever-increasing primary energy consumption and consequent greenhouse gas emissions. To tackle these critical problems, planning and design of energy systems needs to be improved towards a more efficient, cost-effective, and environmentally benign direction. However, although there are many technical choices available, they are often developed separately by their own technical communities and driven by their specific interest, thus methods and experience obtained in planning and design of a certain type of energy systems are usually not applicable to other types of energy systems. Energy systems engineering provides a generic methodological framework to facilitate the planning and design of energy systems and to produce integrated solutions to real-life complex energy problems via a systematic approach.
In this paper, we present an overview of key methodologies of energy systems engineering, covering superstructure based modelling, mixed-integer programming, multi-objective optimization, optimization under uncertainty, and life-cycle assessment. Applications of these methodologies in polygeneration energy systems design, hydrogen infrastructure planning, and design of energy systems in commercial buildings are provided to demonstrate the capability of these methodologies.
|
| Keywords
energy systems engineering
superstructure
mixed-integer programming
multi-objective optimization
optimization under uncertainty
life-cycle assessment
|
|
Issue Date: 05 June 2010
|
|
|
Pistikopoulos E N. Energy systems engineering―anintegrated approach for the energy systems of the future. In: European Congress of Chemical Engineering-6,Copenhagen, Denmark, 2007
|
|
Georgiadis M C, Kikkinides E S, Pistikopoulos E N. Process Systems Engineering. Vol. 5EnergySystems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Georgiadis M C, Pistikopoulos E N. Integrated optimization of oil and gas production. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N. eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Liu P, Pistikopoulos E N, Li Z. An energy systems engineeringapproach to polygeneration and hydrogen infrastructure systems analysis& design. In: PRES 09 (12th InternationalConference on Process Integration, Modelling and Optimisation forEnergy Saving and Pollution Reduction). Rome, Italy, 2009
|
|
Yeomans H, Grossmann I E. A systematic modeling framework of superstructure optimization inprocess synthesis. Computers & ChemicalEngineering, 1999, 23(6): 709―731
doi: 10.1016/S0098-1354(99)00003-4
|
|
Yee T F, Grossmann I E, Kravanja Z. Simultaneous-optimizationmodels for heat integration. 3. process and heat-exchanger networkoptimization. Computers & ChemicalEngineering, 1990, 14(11): 1185―1200
doi: 10.1016/0098-1354(90)80001-R
|
|
Grossmann I E, Westerberg A W. Research challenges in process systems engineering. AIChE Journal, 2000, 46(9): 1700―1703
doi: 10.1002/aic.690460902
|
|
Kokossis A C, Floudas C. A. Synthesis of isothermal reactor separator recycle systems. Chemical Engineering Science1991, 46(5,6): 1361―1683
|
|
Agrawal R. Synthesis of distillation column configurations for amulticomponent separation. Industrial &Engineering Chemistry Research, 1996, 35 (4): 1059―1071
doi: 10.1021/ie950323h
|
|
Ismail S R, Proios P, Pistikopoulos E N. Modular synthesis frameworkfor combined separation/reaction systems. AIChE Journal, 2001, 47(3): 629―649
doi: 10.1002/aic.690470312
|
|
Hatzimanikatis V, Floudas C A, Bailey J E. Analysis and design of metabolicreaction networks via mixed-integer linear optimization. AIChE Journal1996, 42(5): 1277―1292
doi: 10.1002/aic.690420509
|
|
Schweiger C A, Floudas C A. Optimization framework for the synthesis of chemical reactor networks. Industrial & Engineering Chemistry Research, 1999, 38 (3), 744―766
doi: 10.1021/ie980460p
|
|
Tsai M J, Chang C T. Water usageand treatment network design using genetic algorithms. Industrial & Engineering Chemistry Research, 2001, 40(22): 4874―4888
doi: 10.1021/ie010011g
|
|
Hugo A, Rutter P, Pistikopoulos E N, Amorelli A, Zoia G. Hydrogen infrastructurestrategic planning using multi-objective optimization. International Journal of Hydrogen Energy, 2005, 30(15): 1523―1534
doi: 10.1016/j.ijhydene.2005.04.017
|
|
Liu P, Gerogiorgis D I, Pistikopoulos E N. Modeling and optimizationof polygeneration energy systems. CatalysisToday, 2007, 127(1―4): 347―359
doi: 10.1016/j.cattod.2007.05.024
|
|
Liu P, Pistikopoulos E N, Li Z. A mixed-integer optimizationapproach for polygeneration energy systems design. Computers & Chemical Engineering, 2009, 33(3): 759―768
doi: 10.1016/j.compchemeng.2008.08.005
|
|
Liu P, Pistikopoulos E N, Li Z. A multi-objective optimizationapproach to polygeneration energy systems design. AIChE Journal, 2009, 56(5): 1218―1234
|
|
Liu P, Pistikopoulos E N, Li Z. Decomposition based stochasticprogramming approach for polygeneration energy systems design underuncertainty. Industrial & EngineeringChemistry Research, 2010, 49(7): 3295―3305
doi: 10.1021/ie901490g
|
|
Floudas C A. Nonlinear and Mixed-Integer Optimization: Fundamentalsand Applications. USA: Oxford University Press, 1995
|
|
Land A H, Doig A G. An automaticmethod of solving discrete programming problems. Econometrica, 1960, 28(3): 497―520
doi: 10.2307/1910129
|
|
Geoffrion A M. Generalized Benders decomposition. Journal of Optimization Theory and Applications, 1972, 10(4): 237
doi: 10.1007/BF00934810
|
|
Duran M A, Grossmann I E. An outer-approximation algorithm for a class of mixed-integer nonlinearprograms. Mathematical Programming, 1986, 36(3): 307―339
doi: 10.1007/BF02592064
|
|
www.gams.com/solvers/solvers.htmDICOPT
|
|
Adjiman C S, Dallwig S, Floudas C A, Neumaier A. A global optimization method, alpha BB, for general twice-differentiableconstrained NLPs―I. Theoretical advances. Computers & Chemical Engineering, 1998, 22(9): 1137―1158
doi: 10.1016/S0098-1354(98)00027-1
|
|
Sahinidis N, Tawarmalani M. 2009, BARON. URL www.gams.com/solvers/solvers.htm
|
|
Steuer R E. Multiple Criteria Optimization: Theory, Computation,and Application. New York City: John Wiley & Sons, 1986
|
|
Papalexandri K P, Dimkou T I. A parametric mixed-integer optimization algorithm for multiobjectiveengineering problems involving discrete decisions. Industrial & Engineering Chemistry Research, 1998, 37(5): 1866―1882
doi: 10.1021/ie970720n
|
|
Dua V, Pistikopoulos E N. Algorithms for the solution of multiparametric mixed-integer nonlinearoptimization problems. Industrial &Engineering Chemistry Research1999, 38 (10): 3976―3987
doi: 10.1021/ie980792u
|
|
Dua V, Pistikopoulos E N. An algorithm for the solution of multiparametric mixed integer linearprogramming problems. Annals of OperationsResearch, 2000, 99(1―4): 123―139
doi: 10.1023/A:1019241000636
|
|
Pistikopoulos E N. Uncertainty in process design and operations. Computers & Chemical Engineering, 1995, 19(Suppl.1): S553―S563
doi: 10.1016/0098-1354(95)00119-M
|
|
Beale E M L. On minizing a convex function subject to linear inequalities. Journal of the Royal Statistical Society, SeriesB (Methodological), 1955, 17(2): 173―184
|
|
Dantzig G B. Linear programming under uncertainty. Management Science, 1955, 1(3―4): 197―206
doi: 10.1287/mnsc.1.3-4.197
|
|
Tintner G. Stochastic linear programming with applications to agriculturaleconomics. In: Antosiewicz H A, ed. Second Symposium in Linear Programming. Washington, DC, 1955, 197―228
|
|
Bellman R E. Dynamic Programming. Princeton,N J: Princeton University Press, 1957
|
|
Charnes A, Cooper W W. Chance-constrained programming. ManagementScience, 1959, 6(1): 73―79
doi: 10.1287/mnsc.6.1.73
|
|
Bellman R E, Zadeh L A. Decision-makingin a fuzzy environment. Management Science, 1970, 17(4): 141―164
doi: 10.1287/mnsc.17.4.B141
|
|
Horner P R. The father of linear programming. OR/MS Today, 1999, 26(5): 26―30
|
|
Rustem B. A constrained min max algorithm for rival models of thesame economic-system. Mathematical Programming, 1992, 53(3): 279―295
doi: 10.1007/BF01585707
|
|
Rustem B, Nguyen Q. Analgorithm for the inequality-constrained discrete min-max problem. SIAM Journal on Optimization1998, 8(1): 265―283
doi: 10.1137/S1056263493260386
|
|
Darlington J, Pantelides C C, Rustem B, Tanyi B A. An algorithm for constrained nonlinear optimization underuncertainty. Automatica, 1999, 35(2): 217―228
doi: 10.1016/S0005-1098(98)00150-2
|
|
Darlington J, Pantelides C C, Rustem B, Tanyi B A. Decreasing the sensitivity of open-loop optimal solutionsin decision making under uncertainty. EuropeanJournal of Operational Research, 2000, 121(2): 343―362
doi: 10.1016/S0377-2217(99)00034-X
|
|
Zakovic S, Pantelides C, Rustem B. An interior point algorithmfor computing saddle points of constrained continuous minimax. Annals of Operations Research, 2000, 99: 59―77
doi: 10.1023/A:1019284715657
|
|
Zakovic S, Rustem B. Semi-infiniteprogramming and applications to minimax problems. Annals of Operations Research, 2003, 124(1―4), 81―110
doi: 10.1023/B:ANOR.0000004764.76984.30
|
|
Akrotirianakis I, Rustem B. Globallyconvergent interior-point algorithm for nonlinear programming. Journal of Optimization Theory and Applications2005, 125(3): 497―521
doi: 10.1007/s10957-005-2086-2
|
|
Parpas P, Rustem B, Pistikopoulos E N. Linearly constrained globaloptimization and stochastic differential equations. Journal of Global Optimization, 2006, 36(2): 191―217
doi: 10.1007/s10898-006-9026-z
|
|
Sahinidis N V. Optimization under uncertainty: state-of-the-art andopportunities. Computers & ChemicalEngineering, 2004, 28(6―7): 971―983
doi: 10.1016/j.compchemeng.2003.09.017
|
|
Kall P, Wallace S W. Stochastic Programming. Chichester: John Wiley & Sons, 1994
|
|
Acevedo J, Pistikopoulos E N. Computational studies of stochastic optimization algorithms for processsynthesis under uncertainty. Computers& Chemical Engineering, 1996, 20(Suppl.1): S1―S6
doi: 10.1016/0098-1354(96)00011-7
|
|
Ierapetritou M G, Pistikopoulos E N. Novel optimization approach of stochastic planning-models. Industrial & Engineering Chemistry Research, 1994, 33(8): 1930―1942
doi: 10.1021/ie00032a007
|
|
Liu M L, Sahinidis N V. Optimization in process planning under uncertainty. Industrial & Engineering Chemistry Research, 1996, 35(11): 4154―4165
doi: 10.1021/ie9504516
|
|
Acevedo J, Pistikopoulos E N. Stochastic optimization based algorithms for process synthesis underuncertainty. Computers & Chemical Engineering, 1998, 22(4―5): 647―671
doi: 10.1016/S0098-1354(97)00234-2
|
|
Bernardo F P, Pistikopoulos E N, Saraiva P M. Integration and computationalissues in stochastic design and planning optimization problems. Industrial & Engineering Chemistry Research, 1999, 38(8): 3056―3068
doi: 10.1021/ie9807001
|
|
Ahmed S, Sahinidis N V, Pistikopoulos E N. An improved decompositionalgorithm for optimization under uncertainty. Computers & Chemical Engineering, 2000, 23(11―12): 1589―1604
doi: 10.1016/S0098-1354(99)00317-8
|
|
Bonfill A, Bagajewicz M, Espuna A, Puigjaner L. Risk management in the scheduling of batch plants underuncertain market demand. Industrial &Engineering Chemistry Research, 2004, 43(3): 741―750
doi: 10.1021/ie030529f
|
|
Santoso T, Ahmed S, Goetschalckx M, Shapiro A. A stochastic programming approach for supply chain networkdesign under uncertainty. European Journalof Operational Research, 2005, 167(1), 96―115
doi: 10.1016/j.ejor.2004.01.046
|
|
Fava J A, Denison R, Jones B, Curran M A, Vigon B, Selke S, Barnum J. ATechnical Framework for Life-Cycle Assessments. Washington, D.C: SETAC Foundation, 1991
|
|
International Organisationfor Standardisation (ISO). ISO 14040 Environmentalmanagement―Life cycle assessment―Principles and framework. Tech Rep, Geneva, 2006
|
|
International Organisationfor Standardisation (ISO). ISO 14044 Environmentalmanagement―Life cycle assessment―Requirements and guidelines. Tech Rep, Geneva, 2006
|
|
Marechal F, Weber C, Favrat D. Multiobjective design and optimizationof urban energy systems. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Hugo A. Environmentally conscious process selection, design andoptimization. Dissertation for the DoctoralDegree. Imperial College London, 2005
|
|
Li Z, Gao D, Chang L, Liu P, Pistikopoulos E N. Hydrogen infrastructure designand optimization: A case study of China. International Journal of Hydrogen Energy, 2008, 33(20): 5275―5286
doi: 10.1016/j.ijhydene.2008.06.076
|
|
Kikkinides E S. Hydrogen-based energy systems: the storage challenge. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Kuhn D, Parpas P, Rustem B. Stochastic optimization ofinvestment planning problems in the electric power industry. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Dabros M, Perrier M, Forbes F, Fairbank M, Stuart P R. Model-based direct search optimization of the broke recirculationsystem in a newsprint mill. Journal ofCleaner Production, 2003, 13(15): 1416―1423
doi: 10.1016/j.jclepro.2005.04.012
|
|
Salazar E, Samson R, Munnoch K, Stuart P R. Identifying environmental improvement opportunities fornewsprint production using life cycle assessment (LCA).In: 91st Annual Meeting of the Pulp-and-Paper- Technical-Association-of-Canada. Montreal, Canada, 2005, 107: 32―38
|
|
Gaudreault C, Samson R, Stuart P R. Life-cycle thinking in thepulp and paper industry, part 2: LCA studies and opportunities fordevelopment. TAPPI Journal, 2007, 6(8): 3―10.
|
|
Gaudreault C, Samson R, Stuart P R. Life-cycle thinking in thepulp and paper industry, part I: Current practices and most promisingavenues. TAPPI Journal, 2007, 6(7): 25―31
|
|
Laflamme-Mayer M, Linkewich J, Stuart P R. Methodology for using real-timeprocess data for cost modeling and supply chain decision support inthe pulp and paper industry. Pulp &Paper-Canada, 2008, 109(3): 44―51
|
|
Kouramas K, Pistikopoulos E N. Wind turbines modeling and control. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process SystemsEngineering. Weinheim: Wiley-VCH, 2008
|
|
Pereira F E, Keskes E, Galindo A, Jackson G, Adjiman C S. Integrated design of CO2 capture processesfrom natural gas. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Klemes J J, Bulatov I, Perry S J. Energy efficiency and carbonfootprint reduction. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Markowski M, Urbaniec K. Optimizationof structure and operating parameters of a sequence of distillationcolumns for thermal separation of hydrogen. In: Georgiadis M C, Kikkinides E S, Pistikopoulos E N, eds. Energy Systems Engineering. Process Systems Engineering. Weinheim: Wiley-VCH, 2008
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
