In this paper, a small displacement-type magnetorheological grease (MRG) damper based on disk squeeze mode is proposed. The squeeze flow differential equation is obtained. The Navier slip condition is considered on the surfaces and the boundary compatible condition is established. The radial velocity profiles and the radial pressure distributions are derived respectively, and the mathematical stress expression is calculated. To verify rationality of analytical method, the MRG damper is designed and fabricated according to the technical requirements of an engine vibration isolation system. The experimental damping force from MTS870 Electro-hydraulic Servo with sine wave excitation shows that the proposed analytical method is feasible and provides the reference value for designing MRG damper based on disk squeeze mode.
. Analytical study on damping performances of magnetorheological grease damper based on disk squeeze mode and experimental test[J]. Frontiers of Mechanical Engineering, 2011, 6(3): 312-317.
Danxia ZHAO, Changrong LIAO, Qiong LIU, Jing LUO. Analytical study on damping performances of magnetorheological grease damper based on disk squeeze mode and experimental test. Front Mech Eng, 2011, 6(3): 312-317.
Bird R B, Armstrong R C, Hassager O. Dynamics of Polymeric Liquids. New York: Wiley, 1977, 19-21
2
Scott J R. Theory and application of the parallel plate viscometer. Trans Inst Rubber Ind , 1931, 7(2): 169-186
3
Gartling D K, Phan-Thien N. A numerical simulation of a plastic fluid in a parallel-plate plastometer. Journal of Non-Newtonian Fluid Mechanics , 1984, 14: 347-360 doi: 10.1016/0377-0257(84)80053-1
4
Davis A M J, Frenkel A L. Cylindrical liquid bridges squeezed between parallel plates: exact Stokes flow solutions and hydrodynamic forces. Phys Fluids A , 1992, 4(6): 1105-1109 doi: 10.1063/1.858229
5
Laun H M, Rady M, Hassager O. Analytical solutions for squeeze flow with partial wall ship. Journal of Non-Newtonian Fluid Mechanics , 1999, 81(1-2): 1-15 doi: 10.1016/S0377-0257(98)00083-4
6
Roussel N, Lanos C, Toutou Z. Identification of Bingham fluid flow parameters using a simple squeeze test. Journal of Non-Newtonian Fluid Mechanics , 2006, 135(1): 1-7 doi: 10.1016/j.jnnfm.2005.12.001
7
Kalyon D M, Tang H S. Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip. Journal of Non-Newtonian Fluid Mechanics , 2007, 143(2-3): 133-140 doi: 10.1016/j.jnnfm.2007.02.010
8
Vishwanath K P, Kandasamy A. Inertia effects in circular squeeze film bearing using Herschel-Bulkley lubricants. Applied Mathematical Modelling , 2010, 34(1): 219-227 doi: 10.1016/j.apm.2009.04.001
9
Zhu K Q, Ge R. Squeezing flow of electrorheological fluid between two circular plates. Journal of Tsinghua University (Sci & Tech) , 1999, 39(8): 80-83
10
Yang S P, Zhu K Q. Note on a paper by Laun: The squeeze force for a power law fluid.Journal of Non-Newtonian Fluid Mechanics , 2005, 132(1-3): 84-85 doi: 10.1016/j.jnnfm.2005.09.002
11
Xu C H, Huang W B, Xu Y. Squeeze flow of Bingham fluid between two parallel disks with wall slip. Journal of China Agricultural University , 2003, 8(2): 7-10
12
Pinkus O, Sternlicht B. Theory of Hydrodynamic Lubrication. New York: McGraw Hill, 1961
