|
|
|
Determination of the scheme of precision grinding compensation on the radome |
| GUO Dongming, LIU Minjing, ZHANG Chunbo, SHENG Xianjun, SUN Yuwen |
| Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian 116023, China |
|
|
|
|
Abstract The radome, which is often used to house airborne scanning radar antennas, causes a large boresight error and boresight error slope of the radar antenna. One way to decrease the boresight error induced by the radome is to modify its geometric thickness. Determining the grinding scheme from the boresight error performance is the most important problem to be solved. A typical inverse problem about electromagnetic fields is solving the precise grinding compensation area and allowance according to the antenna aperture distribution and the radome s boresight error performance, which could hardly be solved by a purely mathematical method. An effective approach combining theoretical analysis and mathematical calculations with experimental measurement is presented in this paper to determine the grinding area and allowance for compensating the boresight error performance of the radome. By comparing the calculated and measured data of the boresight error and the boresight error slope before and after grinding, it is shown that this method is simple and practical and can be used for many kinds of radomes.
|
|
Issue Date: 05 September 2007
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
