Please wait a minute...
Frontiers of Mechanical Engineering

ISSN 2095-0233

ISSN 2095-0241(Online)

CN 11-5984/TH

Postal Subscription Code 80-975

2018 Impact Factor: 0.989

Front. Mech. Eng.    2008, Vol. 3 Issue (1) : 111-117    https://doi.org/10.1007/s11465-008-0020-7
Bandwidth-limited active suspension controller for an off-road vehicle based on co-simulation technology
FENG Jinzhi1, ZHENG Songlin1, YU Fan2
1.Institute of Automotive Engineering, University of Shanghai for Science and Technology; 2.State Key Laboratory of Vibration, Shock & Noise, Shanghai Jiao Tong University;
 Download: PDF(228 KB)   HTML
 Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract This paper presents the design process of a controller for bandwidth-limited active hydro-pneumatic suspension employed by an off-road vehicle based on co-simulation technology. First, a detailed multi-body dynamic model of the vehicle is established by using the ADAMS/View software package, which is followed by validation using a vehicle field test. Second, a combined PID and fuzzy controller is designed for the bandwidth-limited active suspension system and then programmed by means of S-functions in Matlab/Simulink, to which a data exchange interface with ADAMS/View is also defined. Third, the proposed control algorithm is implemented on the multi-body dynamic vehicle model to enable the co-simulation to run repeatedly until a more practical controller is achieved. In the end, the proposed active suspension system is compared with a conventional passive system. Simulation results show that the proposed active suspension system considerably improves both the ride and handling performance of the vehicle and therefore increases the maximum traveling speeds even on rough roads.
Issue Date: 05 March 2008
 Cite this article:   
FENG Jinzhi,ZHENG Songlin,YU Fan. Bandwidth-limited active suspension controller for an off-road vehicle based on co-simulation technology[J]. Front. Mech. Eng., 2008, 3(1): 111-117.
 URL:  
https://academic.hep.com.cn/fme/EN/10.1007/s11465-008-0020-7
https://academic.hep.com.cn/fme/EN/Y2008/V3/I1/111
1 Yoshimura T Nakaminami K Active suspension of passengercars using linear and fuzzy logic controlsControl Engineering Practice 1999 74147
2 Yoshimura T Kume A Kurimoto M et al.Construction of an active suspension system of aquarter car model using the concept of sliding mode controlJournal of Sound and Vibration 2001 239(2)187199
3 Chou J H Chen S H Lee F Z Grey-fuzzy control for active suspension designInternational Journal of Vehicle Design 1998 19(1)6577
4 Javier U Integrationof multi-body systems in mechatronic simulation environments of anykindInternational Journal of Vehicle Design 2002 28(1/2/3)5766
5 Schuller J Developmentmethodology for dynamic stability control systemsInternational Journal of Vehicle Design 2002 28(1/2/3)3756
6 Feng Jinzhi Yu Fan Li Jun Study of an articulated vehicle modelling based on virtualenvironmentJournal of University of Shanghaifor Science and Technology 2004 26(4)372377 (in Chinese)
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed