| 1 |
Maa Dayou . Engineering Handbooks of Noise and Vibration Control. Beijing: Machinery Industry Press, 2002 (in Chinese)
|
| 2 |
Jackson R S . The performance of acoustical hoods at low frequencies. Acoustica, 1962, 12: 139–152
|
| 3 |
Junger M C . Sound transmission through an elastic enclosure acoustically coupledto a noise source. ASME paper No.70-WA/DE-12, 1970
|
| 4 |
Lee Y Y, Ng C F . Sound insertion loss of stiffenedenclosure plates using the finite element method and the classicalapproach. Journal of Sound and Vibration, 1998, 217(2): 239–260.
doi:10.1006/jsvi.1998.1748
|
| 5 |
Lee Y Y, Ng C F . The prediction of the effectsof stiffness and damping on noise reduction of small enclosures. The Fifth International Conference on Recent Advancesin Structural Dynamics. ISVR, UK, 1994 : 1023–1032
|
| 6 |
Lee Y Y, Ng C F . The noise and vibration reductionof close fitting curved enclosure panels. In: : Proceeding of The International Conference on Structural Dynamics,Vibration, Noise and Control. Hong Kong, 1995 : 1201–1206
|
| 7 |
Lee Y Y, Ng C F . The effects of coupled source/cavitymodes on the acoustic insertion loss of close-fitting enclosures. Journal of Building Acoustics, 1997 : 549–567
|
| 8 |
Lee Y Y, Ng C F . Insertion loss of stiffenedenclosures. The Sixth International Conferenceon Recent Advances in Structural Dynamics. ISVR, UK, 1997 : 553–562
|
| 9 |
Gong Lihong, Sheng Wedong, Yuan Chun, et al.. The application of micro-hole PC board in smallgasoline noise control. Movable Power Station &Vehicle, 2000 (4): 28–31(in Chinese)
|
| 10 |
Bradley J S, Birta J A . A simple model of the soundinsulation of gypsum board on resilient supports. Noise Control Eng J, 2001, 49(5): 216–223.
doi:10.3397/1.2839663
|
| 11 |
Antonio U, Ana L, Jaime L . Technical note: the influence of insulation thicknessand number of layers of gypsum wall board of lightweight partitionsound transmission loss. Noise ControlEng J, 2001, 49(5): 238–240.
doi:10.3397/1.2839666
|
| 12 |
Wang Lucai, Wang Fang, Ren Jianfu . Study on sound insulation property of aluminum foam, Metallic functional materials, 2001, 8(6): 21–24 (in Chinese)
|
| 13 |
Jaehwan K, Lee J K . Broadband transmission noisereduction of smart panels featuring piezoelectric shunt circuits andsound-absorption material. J Acoust SocAm, 2002, 112: 990.
doi: 10.1121/1.1497367
|
| 14 |
Jaehwan K, Choi J Y, Ran H C . Noise reduction performance of smart panels incorporatingpiezoelectric shunt damping. Proc SPIE 4698, 2002: 143
|
| 15 |
Zhou Xinxiang, Li Haidong, Liu Qingyao . Dynamic characteristics analysis of the sound insulatinghood's muffler. Journal of Vibration Engineering, 2004, 17: 1064–1066 (in Chinese)
|
| 16 |
Li Haitao, Zhu Xi, Shi Yong, et al.. Development of porous sound-absorbing materials. Journal of Material Science & Engineering, 2004, 22: 934–938 (in Chinese)
|
| 17 |
Qi Gongjin, Yang Shengliang, Zhao Xun . Advances in sound-absorbing foam materials. Development and Application of Material, 2002, 1: 40–44 (in Chinese)
|
| 18 |
Zhong Xiangzhang, Hu Songchun, Zhang Yin . Sound absorption coefficient of polyurethane foam plasticslabs. Noise and Vibration Control, 1993 (3): 28–30 (in Chinese)
|
| 19 |
Glenn E W . Geometric sound absorbers. J Acoust SocAm, 2000, 108: 2464
|
| 20 |
Lee YY, Lee E W M . Widening the sound absorptionbandwidths of flexible micro-perforated curved absorbers using structuraland acoustic resonances. InternationalJournal of Mechanical Sciences, 2007, 49: 925–934.
doi:10.1016/j.ijmecsci.2007.01.008
|
| 21 |
Maa DahYou . Potential of microperforated panel absorber. Acoustical Society of America, 1998, 104(5): 2861–2866.
doi:10.1121/1.423870
|
| 22 |
Gong Jinxia, Li Li . Research on the problem ofreducing noise of diesel generator set. Journal of Zhengzhou Textile Institute, 2000, 11: 24–26 (in Chinese)
|
| 23 |
Lu Xiaojun, Sun Wei, Liang Jie, et al.. Experimental research on exhaust silencer offoamed aluminum alloy. Journal of AgriculturalMachinery, 1999, 30: 36–40 (in Chinese)
|
| 24 |
Jonathan Z . Domemuffler. J Acoust Soc Am, 2001,109: 857
|
| 25 |
Kory J S, Gary D G . Cross flow baffle muffler. J Acoust Soc Am, 2001, 109: 23
|
| 26 |
Liu Jinchun . Frequency response of sound transmission loss for noise silencersof expansion chamber. Journal Suzhou Instituteof Urban Construction and Environmental Protection, 1995, 3(1): 61–69 (in Chinese)
|
| 27 |
Lueg P . US Patent 2043416, 1936-06-09
|
| 28 |
Chaplin B B . US Patent 4153815
|
| 29 |
Elliot S J . Nelson P A, Stothers I M, et al.. In-flight experiments in the active controlof propeller-induced cabin noise. J Soundand Vib, 1990, 140(2): 219–238.
doi:10.1016/0022-460X(90)90525-5
|
| 30 |
Salikuddin M, Tanna H K, Burrin R H, et al.. Application of active noise control to modelpropeller noise. Journal of Sound and Vibration, 1989, 137(1): 9–41.
doi:10.1016/0022-460X(90)90714-B
|
| 31 |
Elliott S J, Nelson P A . Active noise control. IEEE Signal Processing Magazine, 1993 (10): 12–34
|
| 32 |
Chen Kean . Active Noise Control. Beijing: National Defense Press, 2003 (in Chinese)
|
| 33 |
Herbruggen J, Raeymaeckers J, Sas P . Integration of active noise control in an acoustic encapsulation. Acustica-Acta Acustica Suppl 1, 1996, 82: S194
|
| 34 |
Enamito A, Hayashi T, Kurata K . Active control of the noise radiated from an engine enclosure. In: : Proceedings of Internoise 1998, Christchurch, New Zealand
|
| 35 |
Hessen W . Practicalexperience with an active noise control installation in the exhaustgas line of a co-generation plant engine. Acustica-Acta Acustica Suppl 1, 1996, 82: S195
|
| 36 |
María C, Pedro C . Active control of the exhaustnoise radiated by an enclosed generator. Applied Acoustics, 2000, 61(1): 83–94.
doi:10.1016/S0003-682X(99)00062-6
|
| 37 |
Pfretzschner J, Cobo P, Bote D, et al.. Active control and microperforated panels. In: : Proceedings of the Euronoise, Naples, 2003 : ID 144
|
| 38 |
Cobo P, Pfretzschner J, Cuesta M, Fernandez A . Hybridpassive-active sound absorption in a standing wave tube using a thinplate actuator as secondary source. In: : Proceedings of the ICA, 2004 : 1281–1284
|
| 39 |
Cobo P, Pfretzschner J, Cuesta M, et al.. Anthony, hybrid passive-active-absorption usingmicroperforated panels. J Acoust Soc Am, 2004, 112(3): 2118–2125.
doi:10.1121/1.1786831
|
| 40 |
Niu Feng, Li Ningrong, Qiu Xiaojun . Preliminary experimental research on application of activenoise control in the enclosure. AppliedAcoustics, 2005, 24(5): 281–285 (in Chinese)
|
| 41 |
Wu Bin . Research on active noise attenuation of engine exhaust based on adaptivecontrol technology. PhD Dissertation of Beijing Universityof Technology, 2001
|
| 42 |
Wu Bin, Zhou Dasen, Fei Renyuan, et al.. An experimental investigation into active adaptivenoise control for ducts using motional feedback loudspeaker. Small Internal Combustion Engine, 2001, 30(5): 8–10
|
| 43 |
Wu Bin, Fei Renyuan, Zhou Dasen . Study on acoustic character of active noise attenuationin ducts I theoretical analysis. Journalof Beijing Polytechnic University, 2003, 29(4): 411–414
|
| 44 |
Wu Bin, Fei Renyuan, Zhou Dasen . Study on acoustic character of active noise attenuationin ducts II experiment. Journal of BeijingPolytechnic University, 2003, 10(1): 31–34
|
| 45 |
Yi Shanzhen, Fei Renyuan, Zhou Dasen, et al.. A new hybrid active noise control system: adaptiveplant disturbance canceling structure combined with narrowband adaptivenoise canceling structure. Inter-Noise2003, Korea: Jeju International Convention Center, 2003 : 1012–1019
|
| 46 |
Yi Shanzhen . Optimal research on the adaptive active control system for engineexhaust noise attenuation. PhD Dissertation of BeijingUniversity of Technology, 2004
|
| 47 |
Zhang Nailong, Yang Wentong, Fei Renyuan . Research and development on active sound attenuated enclosurefor generator set. In: : Proceedings ofIsma 2006, 2006 : 301–308
|
| 48 |
Zhang Nailong . A research on key techniques of noise control in the semi-enclosure. PhD Dissertation of Beijing University of Technology, 2007
|
