|
|
|
Theory analysis and system identification methods
on thermal dynamics characteristics of ballscrews |
| XIA Junyong, HU Youmin, WU Bo, SHI Tielin |
| School of Mechanical Science and Engineering Huazhong University of Science and Technology |
|
|
|
|
Abstract Empirical model of machine tools on thermal error has been widely researched, which can compensate for thermal error to some extent but not suitable for thermal dynamic errors produced by dynamic heat sources. The thermoelastic phenomenon of unidimensional heat transfer of ballscrews influenced by changeable heat sources is analyzed based on the theory of heat transfer. Two methods for system identification (the least square system identification and BP artificial neural network (ANN) system identification) are put forward to establish a dynamic characteristic model of thermal deformation of ballscrews. The model of thermal error of the X axis in a feed system of DM4600 vertical miller is established with a fine identification effect. Comparing the results of the two identification methods, the BP ANN system identification is more precise than the least square system identification.
|
|
Issue Date: 05 December 2008
|
|
| 1 |
Huang Shyh-chour . Analysis of a model to forecast thermal deformation of ball screwfeed drive systems. International Journalof Machine Tools & Manufacture, 1994, 35: 1099–1104.
doi:10.1016/0890-6955(95)90404-A
|
| 2 |
Kim S K, Cho D W . Real time estimation of temperaturedistribution in a ball-screw system. InternationalJournal of Ma-chine Tools and Manufacture, 1997, 37(4): 451–464.
doi:10.1016/S0890-6955(96)00036-3
|
| 3 |
Wu Cheng-Hsien, Kung Yu-Tai . Thermal analysis for thefeed drive system of a CNC machine center. International Journal of Machine Tools & Manufacture, 2003, 43: 1521–1528.
doi:10.1016/j.ijmachtools.2003.08.008
|
| 4 |
Song Xianchun, Wang Zhaotan, Liu Xianyin . The thermal deformation control during precision ballscrew grinding. Manufacturing Technology &Machine Tool, 2006, (1): 59–61
|
| 5 |
Yang Hong, Ni Jun . Adaptive model estimationof machine-tool thermal errors based on recursive dynamic modelingstrategy. International Journal of MachineTools & Manufacture, 2005, 45: 1–11.
doi:10.1016/j.ijmachtools.2004.06.023
|
| 6 |
Xia Junyong, Hu Youmin, Wu Bo, Shi Tielin . Numericalsolution and simulation of the thermal dynamic characteristics ofball-screws. Frontiers of Mechanical Engineeringin China, 2008, 3(1): 28–36.
doi:10.1007/s11465-008-0007-4
|
| 7 |
Xia Junyong, Hu Youmin, Wu Bo, Shi Tielin . The thermaldynamic characteristic of ball-screw when taking in thermal elasticity. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2008, 36(3): 1–4
|
| 8 |
Yang Hong, Ni Jun . Dynamic modeling for machinetool thermal error compensation. ASME Trans. Journal of Manufacturing Science and Engineering, 2003, 125: 245–254.
doi:10.1115/1.1557296
|
| 9 |
Yu Changmin . Heat Transfer and Numerical Analysis. Beijing: Press of Tshinghua University, 1982
|
| 10 |
Yu Zuopin, Lu Lu . Heat Transfering. Beijing: High Education Press, 1995 : 14–31
|
| 11 |
Lennart Ljung . System Identification – theory for User. Prentice Hall PTR, 1999
|
| 12 |
Hou Yuanbing, Wang Meietal . System identificating andMatlab simulating. Beijing: Scientific Press, 2004 : 53–55
|
| 13 |
Wang Yongji . Neural Network Controling. Beijing: Mechanical Industry Press, 1998
|
| 14 |
Lo Chih-hao, Yuan Jingxia, Ni Jun . Optimal temperature variable selection by grouping approachfor thermal error modeling and compensation. International Journal of Machine Tools & Manufacture, 1999, 39: 1383–1396.
doi:10.1016/S0890-6955(99)00009-7
|
| 15 |
Yang Jianguo, Yuan Jingxia, Ni Jun . Thermal error mode analysis and robust modeling for errorcompensation on a CNC turning center. InternationalJournal of Machine Tools & Manufacture, 1999, 39 : 1367–1381.
doi:10.1016/S0890-6955(99)00008-5
|
| 16 |
Lee D S, Choi J Y, Choi D H . ICA based thermal source extraction and thermal distortioncompensation method for a machine tool. International Journal of Machine Tools & Manufacture, 2003, 43: 589–597.
doi:10.1016/S0890-6955(03)00017-8
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
