|
|
|
Transfer function solving, simulating and testing
of thermal dynamics characteristics of a ballscrew |
| Junyong XIA1,Bo WU2,Youmin HU2,Tielin SHI2, |
| 1.The State Key Laboratory
of Digital Manufacturing Equipment and Technology, Huazhong University
of Science and Technology, Wuhan 430074, China；Rolling Mill Business
Division, WISDRI Engineering & Research Incorporation Limited,
Wuhan 430223, China; 2.The State Key Laboratory
of Digital Manufacturing Equipment and Technology, Huazhong University
of Science and Technology, Wuhan 430074, China; |
|
|
|
|
Abstract Based on the theory of heat transfer, the transfer function between the thermal deformation of any point on the lead screw and the temperature of heat sources of a ballscrew under the influence of multi-changeable heat sources is solved by using the Laplace transform method. By solving the amplitude-frequency characteristics and phase-frequency characteristics of the transfer function, the steady-state response of thermal deformation of the ballscrew is obtained, and the thermal dynamics characteristics of the lead screw under the influence of multi-heat sources are further studied. Comparing with the result of finite-element simulation, the theoretical analyzing result accords with the steady-state part of the finite-element simulating result. Through tests of the steady-state response of thermal deformation, the thermal dynamics characteristics are further studied. The curves of tests by and large accord with the theoretical analyzing result, which shows that the method of transfer function is correct and valid in solving the steady-state response of thermal deformation.
|
| Keywords
ballscrew
Laplace transform
transfer function
thermal dynamic characteristics
|
|
Issue Date: 05 June 2010
|
|
|
Wu N X, Hu R F. Influence of rigidity of feed system with ball screw in NC latheon positioning precision. Chinese Engineering Science, 2004, 9: 46–49 (in Chinese)
|
|
Kim S K, Cho D W. Real time estimation of temperature distribution in a ball-screw system. International Journal of Ma-chine Tools and Manufacture, 1997, 37(4): 451–464
doi: 10.1016/S0890-6955(96)00036-3
|
|
Wu C H, Kung Y T. Thermal analysis for the feed drive system of a CNC machine Center. International Journal of Machine Tools & Manufacture, 2003, 43: 1521–1528
doi: 10.1016/j.ijmachtools.2003.08.008
|
|
Song X C, Wang Z T. The Thermal deformation control during precision ball screw grinding. Manufacturing Technology and Machine Tool, 2006, 1: 59–61
|
|
Yang H, Ni J. Dynamic neural network modeling for nonlinear, nonstationary machine tool thermallyinduced error. International Journal ofMachine Tools and Manufacture, 2005, 45: 455–465
doi: 10.1016/j.ijmachtools.2004.09.004
|
|
Yu C M. Heat Transfer and Numerical Analyse. Beijing: Press of Qinghua University, 1982, 4: 368–369 (in Chinese)
|
|
Xia J Y, Hu Y M, Wu B, Shi T L. A numerical solution and simulation of the thermal dynamic characteristic forball-screw. Frontiers of Mechanical Engineeringin China, 2008, 3(1): 28–36
doi: 10.1007/s11465-008-0007-4
|
|
Zhang C H, Fan B Q. ANSYS8.0. Beijing: Thermal Analysics. Railroad Industry Press, 2005 (in Chinese)
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
