|
|
Review of small aspheric glass lens molding technologies |
Shaohui YIN1(),Hongpeng JIA1,Guanhua ZHANG1,Fengjun CHEN1,Kejun ZHU2 |
1. National Engineering Research Center for High Efficiency Grinding, Hunan University, Changsha 410082, China 2. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China |
|
|
Abstract Aspheric lens can eliminate spherical aberrations, coma, astigmatism, field distortions, and other adverse factors. This type of lens can also reduce the loss of light energy and obtain high-quality images and optical characteristics. The demand for aspheric lens has increased in recent years because of its advantageous use in the electronics industry, particularly for compact, portable devices and high-performance products. As an advanced manufacturing technology, the glass lens molding process has been recognized as a low-cost and high-efficiency manufacturing technology for machining small-diameter aspheric lens for industrial production. However, the residual stress and profile deviation of the glass lens are greatly affected by various key technologies for glass lens molding, including glass and mold-die material forming, mold-die machining, and lens molding. These key technical factors, which affect the quality of the glass lens molding process, are systematically discussed and reviewed to solve the existing technical bottlenecks and problems, as well as to predict the potential applicability of glass lens molding in the future.
|
Keywords
aspheric glass lens
mold-die manufacturing
lens molding
molding process simulation
|
Corresponding Author(s):
Shaohui YIN
|
Just Accepted Date: 14 December 2016
Online First Date: 09 January 2017
Issue Date: 21 March 2017
|
|
1 |
Yin S, Zhu K, Yu J, . Micro aspheric glass lens molding process. Journal of Mechanical Engineering, 2012, 48(15): 182–192 (in Chinese)
https://doi.org/10.3901/JME.2012.15.182
|
2 |
Fotheringham U, Baltes A, Fischer P, . Refractive index drop observed after precision molding of optical elements: A quantitative understanding based on the Tool-Narayanaswamy-Moynihan model. Journal of the American Ceramic Society, 2008, 91(3): 780–783
https://doi.org/10.1111/j.1551-2916.2007.02238.x
|
3 |
Yamamoto Y, Tsuchiya K, Nagahama S, . European Patent, 1568665,<Date> 2005-08-31</Date>
|
4 |
Fukuyama S, Matsuzuki I, Fujii H. US Patent, 6823697, <Date>2004-11-30</Date>
|
5 |
Murakoushi H, Matsumura S. US Patent, 6848274, <Date>2005-02-01</Date>
|
6 |
Wang Z, Li J, Zhang F, . The design of mold with simulation for chalcogenide glass precision molding. Opto-Electronic Engineering, 2016, 43(5): 53–58(in Chinese)
|
7 |
Gan F. Science and Technology of Modern Glass. Shanghai: Shanghai Scientific & Technical Publishers, 1988, 225–228 (in Chinese)
|
8 |
James F S, Robert H. Ceramic and Glass Materials: Structure, Properties and Processing. New York: Springer, 2008
|
9 |
Huo Z B. Investigation of interfacial reaction between various optical glass and mold materials. Dissertation for the Master’s Degree. Taiwan: The Tamkang University, 2007
|
10 |
Hitoshi O. Ultra-precision grinding of structural ceramics by electrolytic in-process dressing (ELID) grinding. Journal of Materials Processing Technology, 1996, 57(9): 272–277
|
11 |
Yin S, Tang K, Hitoshi O, . Nozzle-type ELID grinding characteristics of cemented carbides. Advanced Materials Research, 2010, 126‒128: 1007–1012
https://doi.org/10.4028/www.scientific.net/AMR.126-128.1007
|
12 |
Saeki M, Kurjyagawa T, Syoji K. Machining of aspherical molding dies utilizing parallel grinding method. Journal of Japan Society of Precision Engineering, 2002, 68(8): 1067–1071 (in Japanese)
|
13 |
Suzuki H, Kodera S, Maekawa S, . Study on precision grinding of micro aspherical surface feasibility study of micro aspherical surface by inclined rotational grinding. Journal of the Japan Society of Precision Engineering, 1998, 64(4): 619–623 (in Japanese)
https://doi.org/10.2493/jjspe.64.619
|
14 |
Chen F, Yin S, Huang H, . Fabrication of small aspheric moulds using single point inclined axis grinding. Precision Engineering, 2015, 39: 107–115
https://doi.org/10.1016/j.precisioneng.2014.06.009
|
15 |
Chen F, Yin S, Hitoshi O, . Form error compensation in single-point inclined axis nanogrinding for small aspheric insert. International Journal of Advanced Manufacturing Technology, 2013, 65(1‒4): 433–441
https://doi.org/10.1007/s00170-012-4182-4
|
16 |
Prokhorov I V, Kordonsky W I, Gleb L K, . New high-precision magnetorheological instrument based method of polishing optics. OSA OF&T Workshop Digest, 1992(24): 134–136
|
17 |
Yin S. Magnetic assisted ultra-precision finishing technology. Changsha: Hunan University Press, 2008 (in Chinese)
|
18 |
Peng X, Dai Y, Li S. Material removal model of magnetorheological finishing. Journal of Mechanical Engineering, 2004, 40(4): 67–70 (in Chinese)
https://doi.org/10.3901/JME.2004.04.067
|
19 |
Yin S, Chen F, Tang H, China Patent, 200910043610.9, <Date>2009-10-28</Date> (in Chinese)
|
20 |
Yin S, Xu Z, Chen F, . Inclined axis magnetorheological finishing technology for small aspherical surface. Journal of Mechanical Engineering, 2013, 49(17): 33–38
https://doi.org/10.3901/JME.2013.17.033
|
21 |
Suzuki H, Moriwaki T, Okino T, . Development of ultrasonic vibration assisted polishing machine for micro aspheric die and mold. Annals of the CIRP—Manufacturing Technology, 2006, 55(1): 385–388
https://doi.org/10.1016/S0007-8506(07)60441-7
|
22 |
Suzuki H, Hamada S, Okino T, . Ultraprecision finishing of micro aspheric surface by ultrasonic two-Axis vibration assisted polishing. Annals of the CIRP—Manufacturing Technology, 2010, 59(1): 347–350
https://doi.org/10.1016/j.cirp.2010.03.117
|
23 |
Guo J, Morita S, Hara M, . Ultra-precision finishing of micro-aspheric mold using a magnetostrictive vibrating polisher. CIRP Annals—Manufacturing Technology, 2012, 61(1): 371–374
https://doi.org/10.1016/j.cirp.2012.03.141
|
24 |
Yin S, Hu T, Liu L, China Patent, 201110021395.X,<Date>2011-01-19</Date> (in Chinese)
|
25 |
Chen F, Yin S, Hu T, China Patent, 200910042538.8, <Date>2009-01-19</Date> (in Chinese)
|
26 |
Xu Z, Yin S, Chen F, . Combined process consisting of ultra-precision turning and polishing technology for small aspheric surface. Nanotechnology and Precision Engineering, 2013, 11(6): 479–484
|
27 |
Shishido K, Sugiura M, Shoji T. Aspect of glass softening by master mold. Proceedings of the Society for Photo-Instrumentation Engineers, 1995, 2536: 421–433
https://doi.org/10.1117/12.218449
|
28 |
Hosoe S, Masaki Y. High-speed glass molding method to mass produce precise optics. Proceedings of the Society for Photo-Instrumentation Engineers, 1995, 2576: 115–120
https://doi.org/10.1117/12.215583
|
29 |
Zhou T, Fan Y. China Patent, 201310160964.8, <Date>2013-05-06</Date> (in Chinese)
|
30 |
Yin S, Zhu K, Chen F, China Patent, 201110054554.6, <Date>2011-03-08</Date> (in Chinese)
|
31 |
Yin S, Zhu K, Hu T, China Patent, 201110021412.X, <Date>2011-01-19</Date> (in Chinese)
|
32 |
Zhong D, Mustoe G, Moore J, . Finite element analysis of a coating architecture for glass molding dies. Surface and Coatings Technology, 2001, 146‒147: 312–317
https://doi.org/10.1016/S0257-8972(01)01399-8
|
33 |
Tamura T, Umetani M, Yamada K, . Fabrication of antireflective subwavelength structure on spherical glass surface using imprinting process. Applied Physics Express, 2010, 3(11): 112501
https://doi.org/10.1143/APEX.3.112501
|
34 |
Ikeda H, Kasa H, Nishiyama H, . Evaluation of demolding force for glass-imprint process. Journal of Non-Crystalline Solids, 2014, 383(1): 66–70
https://doi.org/10.1016/j.jnoncrysol.2013.04.055
|
35 |
Firestone G C, Yi A Y. Precision compression molding of glass microlenses and microlens arrays – an experimental study. Applied Optics, 2005, 44(29): 6115–6122
|
36 |
Chen Y, Yi A Y, Yao D G, . A reflow process for glass microlens array fabrication by use of precision compression molding. Journal of Micromechanics and Microengineering, 2008, 18(5): 55022–55029
https://doi.org/10.1088/0960-1317/18/5/055022
|
37 |
Wittwer V, Gombert A, Rose K, . Applications of periodically structured surfaces on glass. Glass Science and Technology, 2000, 73(4): 116–118
|
38 |
Aoyama S, Yamashita T. Planar microlens arrays using stumping replication method. Proceedings of the Society for Photo-Instrumentation Engineers, 1997, 3010: 11–17
https://doi.org/10.1117/12.274410
|
39 |
Zhu K. Experimental study and numerical simulation of glass molding process for optical glass lens. Changsha: Hunan University, 2013 (in Chinese)
|
40 |
Jain A, Yi A Y. Finite element modeling of structural relaxation during annealing of a precision-molded glass lens. Journal of Manufacturing Science and Engineering, 2006, 128(3): 683‒690
https://doi.org/10.1115/1.2163362
|
41 |
Ananthasayanam B. Computational modeling of precision molding of aspheric glass optics. Dissertation for the Doctoral Degree. Clemson: The Clemson University, 2008
|
42 |
Sarhadi A, Hattel J H, Hansen H N. Three-dimensional modeling of glass lens molding. International Journal of Applied Glass Science, 2015, 6(2): 182–195
https://doi.org/10.1111/ijag.12110
|
43 |
Yin S, Huo J, Zhou T, . Simulation of heating and pressing parameters of micro aspheric lens molding process. Journal of Hunan University (Natural Sciences), 2011, 38(1): 35–39 (in Chinese)
|
44 |
Yin S, Jin S, Zhu K, . Stress analysis of compression molding of aspherical glass lenses using finite element method. Opto-Electronic Engineering, 2010, 37(10): 111–115 (in Chinese)
|
45 |
Yin S, Wang Y, Zhu K, . Numerical simulation of ultraprecision glass molding for micro aspherical glass lens. Guangzi Xuebao, 2010, 39(11): 2020–2024 (in Chinese)
https://doi.org/10.3788/gzxb20103911.2020
|
46 |
Yi A Y, Tao B, Klocke F, . Residual stresses in glass after molding and its influence on optical properties. Procedia Engineering, 2011, 19: 402–406
https://doi.org/10.1016/j.proeng.2011.11.132
|
47 |
Zhu K, Yin S, Yu J, . Finite element analysis on non-isothermal glass molding. Advanced Materials Research, 2012, 497: 240–244
https://doi.org/10.4028/www.scientific.net/AMR.497.240
|
48 |
Zhu K, Yin S, Fan Y, . Influences of model’s shape on molding time in glass molding press. Advanced Materials Research, 2012, 581 ‒ 582: 645–648
https://doi.org/10.4028/www.scientific.net/AMR.581-582.645
|
49 |
Yin S, Zhu K, Wang Y, . Numerical simulation on two-step isothermal glass lens molding. Advanced Materials Research, 2010, 126‒128: 564–569
https://doi.org/10.4028/www.scientific.net/AMR.126-128.564
|
50 |
Chen Y, Yi A Y, Su L, . Numerical Simulation and Experimental Study of Residual Stresses in Compression Molding of Precision Glass Optical Components. Journal of Manufacturing Science and Engineering-Transactions of the Asme. 2008, 130(5): 051012–051020
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|