|
|
Semi-solid thixo casting structure of aluminum
alloy and relevant assistant analysis with the help of computer simulation |
YANG Yi-tao, WANG Jian-fu, CHEN Meng, ZHANG Heng-hua, SHAO Guang-jie |
School of Materials Science and Engineering, Shanghai University |
|
|
Abstract The relationship between structure morphology of semi-solid aluminum alloy die-casting sample and filling condition was studied. By systematical structure analysis and computer simulation of the filling process, the quantitative relationship between microscopic morphology (such as solid fraction, grain size and shape) and formation state was studied. The results showed that the billet microstructure must have fine and round grains for the die-casting of complex shapes. It is necessary to optimize injection speeds to escape the non-uniform distribution of the solid fraction in complex and changeable mold cavity.
|
Issue Date: 05 September 2008
|
|
1 |
Flemings M C . Behavior of metal alloys in the semisolid state. Metallurgical Transactions A, 1991, 22(5): 957–981. doi:10.1007/BF02661090
|
2 |
Kang Y L, Mao W M, Hu Z Q . Semi-Solid Processing Theory and Technology of MetalMaterial. Beijing: Science Press of China, 2004, 5 (in Chinese)
|
3 |
Zhang H H, Shao G J, Xu L P . Study on the property and process parameters of semi-soliddie casting of A356 aluminum alloy. ChinaFoundry, 2005, 54(2): 144–147 (in Chinese)
|
4 |
Tian Z F, Yang B C, Xie L J, et al.. Discussion of thixocasting processing of semi-solidmetal. Foundry Technology, 2005, 26(1): 28–30 (in Chinese)
|
5 |
Koke J, Modigell M . Flow behaviour of semi-solidmetal alloys. Journal of Non-NewtonianFluid Mechanics, 2003, 112(2–3): 141–160. doi:10.1016/S0377‐0257(03)00080‐6
|
6 |
Yu Z T, Zhang H H, Shao G J, et al.. The research status of the SSM processing technologiesof aluminum alloy and the mechanical properties of the products. Metal Forming Technology, 2003, 21(4): 58–61 (in Chinese)
|
7 |
Tan J B, Xing S H, Li L X . Transactions of Nonferrous Metals Society of ChinaThe Journal Nonferrous Metal of China, 2006, 16(4): 612–615 (in Chinese)
|
8 |
Chen J Y, Fan Z . Modelling of rheologicalbehaviour of semi-solid metal slurry Part 1-theory. Materials Science and Technology, 2002, 18(3): 237–242 (in Chinese). doi: 10.1179/026708301225000662
|
9 |
Lin X, Li T, Huang W D . The 9th International Conference on Semi-Solid Processingof Alloys and Composites. Busan, Korea, 2006, 155
|
10 |
Shi H J, Yang Y T, Sun B L, et al.. Simulation of aluminum alloy in continuous castingand aided optimization of processing parameters. Special Casting & Nonferrous Alloys, 2005, 25(6): 344–346 (in Chinese)
|
11 |
Xu L, Zhang H H, Shao G J, et al.. Microstructural evolution rule of non-dendritealuminum alloys A356 during induction heating. Heat Treatment of Metals, 2003, 28(10): 29 (in Chinese)
|
12 |
Yang Y T, Wang J F, Zhang H H, et al.. Transactions of Nonferrous Metals Society ofChina, 2006, s1402
|
13 |
Zhang H H, Shao G J, Xu L . The 8th International Conference on Semi-Solid Processingof Alloys and Composites. Limassol, Cyprus, 2004, 473
|
14 |
Kang C G, Seo P K, Kang S S . The effect of injection velocity on liquid segregationand mechanical properties in arm part fabricated by semi-solid diecasting process. Journal of Materials ProcessingTechnology, 2006, 176(1–3): 32–40. doi:10.1016/j.jmatprotec.2006.02.002
|
15 |
Cho W G, Kang C G . Mechanical properties andtheir microstructure evaluation in the thixoforming process of semi-solidaluminum alloys. Journal of Materials ProcessingTechnology, 2000, 105(3): 269–277. doi:10.1016/S0924‐0136(00)00577‐X
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|