|
|
|
Analysis of fluid flow in centrifugal casting |
| K. S. KEERTHI PRASAD1,P. G. MUKUNDA1,M. S. MURALI2, |
| 1.Department of Mechanical
Engineering, Nitte Meenakshi Institute of Technology, Bangalore 560064,
Karnataka, India; 2.Department of Mechanical
Engineering, Rashtreeya Vidyalaya College of Engineering, Bangalore
560059, Karnataka, India; |
|
|
|
|
Abstract Centrifugal casting process is a fast process with melt, cast and moulds being opaque. It is almost impossible to observe the melt behavior during casting. Cold modeling experiments were conducted using horizontal transparent moulds
|
| Keywords
cold modeling experiment
aluminum
fluid flow
|
|
Issue Date: 05 March 2010
|
|
|
Janco N. CentrifugalCasting. American Foundrymen’s Society, 1992
|
|
Tirumkudulu M, Mileo A, Acrivos A. Particle segregation in monodisperse sheared suspensionsin a partially filled rotating horizontal cylinder. Physics of Fluids, 2000, 12(6): 1615―1618
doi: 10.1063/1.870411
|
|
Thoroddsen S, Mahadevwn L. Experimental study of coatingflows in partially filled horizontal rotating cylinder. Experiments in Fluids, 1997, 23(1): 1―6
doi: 10.1007/s003480050080
|
|
Hosoi A E, Mahadevan L. Axial instability of a free-surfacefront in a partially filled horizontal rotating cylinder. Physics of Fluids, 1999, 11(1): 97―105
doi: 10.1063/1.869905
|
|
Heijst G J F. Fluid flow in a partially-filled rotating cylinder. Journal of Engineering Mathematics, 1986, 20(3): 233―250
doi: 10.1007/BF00038707
|
|
Acrivos A, Jin B. Rimming flows within a rotatinghorizontal cylinder: asymptotic analysis of the thin-film lubricationequations and stability of their solutions. Journal of Engineering Mathematics, 2004, 50(2―3): 99―121
doi: 10.1007/s10665-004-1772-7
|
|
Tirumkudulu M, Acrivos A. Coating flows within a rotatinghorizontal cylinder: Lubrication analysis, numerical computations,and experimental measurements. Physicsof Fluids, 2001, 13(1): 14―19
doi: 10.1063/1.1329909
|
|
Johnson R E. Steady state coating flows inside a rotating horizontal cylinder. Journal of Fluid Mechanics, 1988, 190: 321―342
doi: 10.1017/S0022112088001338
|
|
Preziosi L, Joseph D D. The run-off conditions forcoating flows and rimming flows. Journalof Fluid Mechanics, 1988, 187: 99―113
doi: 10.1017/S0022112088000357
|
|
Melo F. Localizedstates in a film-dragging experiment. PhysicalReview E, 1993, 48(4): 2704―2712
doi: 10.1103/PhysRevE.48.2704
|
|
Evans P L, Schwartz L W, Roy R V. Steady and unsteady solutions for coating flow on a rotatinghorizontal cylinder: Two dimensional theoretical and numerical modeling. Physics of Fluids, 2004, 16(8): 2742―2756
doi: 10.1063/1.1758943
|
|
Thoroddsen S T, Mahadevan L. Experimental study of coatingflows in a partially-filled horizontally rotating cylinder. Experiments in Fluids, 1997, 23(1): 1―13
doi: 10.1007/s003480050080
|
|
Barrow H. ASurvey of Fluid Flow and Heat Transfer in Rotating Ducts. London: HerMajesty’s Stationary Officer, 1969, 1―18
|
|
Maas L R M. Wave focusing and ensuing mean flow due to symmetry breaking in rotatingfluids. Journal of Fluid Mechanics, 2001, 437: 13―28
doi: 10.1017/S0022112001004074
|
|
Aitta A. Newbifurcations in a partially filled, horizontal rotating cylinder. In: Wesfreid J E, Brand H R, Manneville P, et al., eds. Propagation in Non-Equilibrium Systems. Berlin: Springer-Verlag, 1988, 325―330
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
