Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads
Masoud ABEDINI1(), Azrul A. MUTALIB2(), Chunwei ZHANG1(), Javad MEHRMASHHADI3, Sudharshan Naidu RAMAN4, Roozbeh ALIPOUR5, Tohid MOMENI5, Mohamed H. MUSSA2
1. School of Civil Engineering, Qingdao University of Technology, Qingdao 266033, China 2. Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia, LIKM Bangi, Selangor 43600, Malaysia 3. Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588, United States 4. Department of Architecture and Built Environment, Universiti Kebangsaan Malaysia, UKM Bangi, Selangor 43600, Malaysia 5. Department of Mechanical Engineering, Mahshahr Branch, Islamic Azad University, Mahshahr, Iran
Reinforced concretes (RC) have been widely used in constructions. In construction, one of the critical elements carrying a high percentage of the weight is columns which were not used to design to absorb large dynamic load like surface bursts. This study focuses on investigating blast load parameters to design of RC columns to withstand blast detonation. The numerical model is based on finite element analysis using LS-DYNA. Numerical results are validated against blast field tests available in the literature. Couples of simulations are performed with changing blast parameters to study effects of various scaled distances on the nonlinear behavior of RC columns. According to simulation results, the scaled distance has a substantial influence on the blast response of RC columns. With lower scaled distance, higher peak pressure and larger pressure impulse are applied on the RC column. Eventually, keeping the scaled distance unchanged, increasing the charge weight or shorter standoff distance cause more damage to the RC column. Intensive studies are carried out to investigate the effects of scaled distance and charge weight on the damage degree and residual axial load carrying capacity of RC columns with various column width, longitudinal reinforcement ratio and concrete strength. Results of this research will be used to assessment the effect of an explosion on the dynamic behavior of RC columns.
M Abedini, A A Mutalib, S N Raman, R Alipour, E Akhlaghi. Pressure-impulse (P-I) diagrams for reinforced concrete (RC) structures: A review. Archives of Computational Methods in Engineering, 2019, 26: 733–767 https://doi.org/10.1007/s11831-018-9260-9.
2
M Fertal, K Leone. Applications of Blast/FX, an explosive effects analysis software tool. In: Proceedings IEEE 34th Annual 2000 International Carnahan Conference. Ottawa: IEEE, 2000, 218–221
3
E J. Conrath Structural design for physical security: State of the practice. American Society of Civil Engineers, 1999
4
Federal Emergency Management Agency (FEMA428). Explosive Blast. Washington: US department of Homeland Security, 2004
5
K Morrill, L Malvar, J Crawford, J Ferritto. Blast resistant design and retrofit of reinforced concrete columns and walls. In: Proceedings of the 2004 Structures Congress—Building on the Past: Securing the Future. Nashville: American Society of Civil Engineers, 2004, 1–8
6
J Xu, C Wu, H Xiang, Y Su, Z X Li, Q Fang, H Hao, Z Liu, Y Zhang, J Li. Behaviour of ultra high performance fibre reinforced concrete columns subjected to blast loading. Engineering Structures, 2016, 118: 97–107 https://doi.org/10.1016/j.engstruct.2016.03.048
7
H Al-Thairy. A modified single degree of freedom method for the analysis of building steel columns subjected to explosion induced blast load. International Journal of Impact Engineering, 2016, 94: 120–133 https://doi.org/10.1016/j.ijimpeng.2016.04.007
8
F Zhang, C Wu, X L Zhao, A Heidarpour, Z Li. Experimental and numerical study of blast resistance of square CFDST columns with steel-fibre reinforced concrete. Engineering Structures, 2017, 149: 50–63
9
V Karlos, G Solomos. Calculation of Blast Loads for Application to Structural Components. Luxembourg: Publications Office of the European Union, 2013
10
R Alipour, S Izman, M N Tamin. Estimation of Charge Mass for High Speed Forming of Circular Plates Using Energy Method. Advanced Materials Research, 2014, 845: 803–808
11
M Abedini, A A Mutalib. Investigation into damage criterion and failure modes of RC structures when subjected to extreme dynamic loads. Archives of Computational Methods in Engineering, 2020, 27: 501–515 https://doi.org/10.1007/s11831-019-09317-z.
12
T Ngo, P Mendis, A Gupta, J Ramsay. Blast loading and blast effects on structures—An overview. Electronic Journal of Structural Engineering, 2007, 7: 76–91
13
T H Almusallam, H Elsanadedy, H Abbas, T Ngo, P Mendis. Numerical analysis for progressive collapse potential of a typical framed concrete building. International Journal of Civil & Environmental Engineer, 2010, 10: 40–46
14
A M Remennikov. A review of methods for predicting bomb blast effects on buildings. Journal of Battlefield Technology, 2003, 6(3): 5–10
15
UFC-3-340-02. Design of structures to resist the effects of accidental explosions. US Army Corps of Engineers, Naval Facilities Engineering Command. Washington, D.C.: Air Force Civil Engineer Support Agency, Dept of the Army and Defense Special Weapons Agency, 2008.
16
J T Baylot, T L Bevins. Effect of responding and failing structural components on the airblast pressures and loads on and inside of the structure. Computers & Structures, 2007, 85(11–14): 891–910 https://doi.org/10.1016/j.compstruc.2007.01.001
17
M Abedini, A A Mutalib, S N Raman, E Akhlaghi, M H Mussa, M Ansari. Numerical investigation on the non-linear response of reinforced concrete (RC) columns subjected to extreme dynamic loads. Journal of Asian Scientific Research, 2017, 7(3): 86–98 https://doi.org/10.18488/journal.2.2017.74.86.98
M H Mussa, A A Mutalib, R Hamid, S R Naidu, N A M Radzi, M Abedini. Assessment of damage to an underground box tunnel by a surface explosion. Tunnelling and Underground Space Technology, 2017, 66: 64–76 https://doi.org/10.1016/j.tust.2017.04.001
20
A A, Mutalib H. Hao Development of P-I diagrams for FRP strengthened RC columns. International Journal of Impact Engineering, 2011, 38: 290–304
21
L J Malvar, J E Crawford, J W Wesevich, D Simons. A plasticity concrete material model for DYNA3D. International Journal of Impact Engineering, 1997, 19(9–10): 847–873 https://doi.org/10.1016/S0734-743X(97)00023-7
22
P Soden, M Hinton, A Kaddour. Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates. Composites Science and Technology, 1998, 58(7): 1011–1022 https://doi.org/10.1016/S0266-3538(98)00078-5
23
A A Mutalib, H Hao. Numerical analysis of FRP-composite-strengthened RC panels with anchorages against blast loads. Journal of Performance of Constructed Facilities, 2011, 25(5): 360–372 https://doi.org/10.1061/(ASCE)CF.1943-5509.0000199
24
F Bobaru, J Mehrmashadi, Z Chen, S Niazi. Intraply fracture in fiber-reinforced composites: A peridynamic analysis. In: The ASC 33rd Annual Technical Conference & 18th US-Japan Conference on Composite Materials. Seattle, 2018 https://doi.org/10.12783/asc33/26039
25
T Rabczuk, T Belytschko. A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196: 2777–2799
26
T Rabczuk, T Belytschko. Cracking particles: A simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343 https://doi.org/10.1002/nme.1151
27
B L Wang, Y B Guo, C W Zhang. Cracking and thermal shock resistance of a Bi2Te3 based thermoelectric material. Engineering Fracture Mechanics, 2016, 152: 1–9
28
C W Zhang, L Y Li, J P Ou. Swinging motion control of suspended structures: Principles and applications. Structural Control and Health Monitoring, 2010, 17(5): 549–562
29
M Behzadinasab, T J Vogler, A M Peterson, R Rahman, J T Foster. Peridynamics modeling of a shock wave perturbation decay experiment in granular materials with intra-granular fracture. Journal of Dynamic Behavior of Materials, 2018, 4(4): 529–542 https://doi.org/10.1007/s40870-018-0174-2
30
J Mehrmashhadi, Y Tang, X Zhao, Z Xu, J J Pan, Q V Le, F Bobaru. The effect of solder joint microstructure on the drop test failure—A peridynamic analysis. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2019, 9(1): 58–71 https://doi.org/10.1109/TCPMT.2018.2862898
31
D Watstein. Effect of straining rate on the compressive strength and elastic properties of concrete. Journal Proceedings, 1953, 49(4): 729–744
32
P G Jones, F Richart. The effect of testing speed on strength and elastic properties of concrete. Proceedings, 1936, 36: 380–392
33
W H Glanville, G Grime, E N Fox, W W Davies. An Investigation of the Stresses in Reinforced Concrete Piles During Driving. HM Stationery Office, 1938
34
Comit Euro-International du Beton (CEB). CEB-FIP model code 1990: Design code. Telford, 1993
35
M Abedini, A A Mutalib, S N Raman, E Akhlaghi. Modeling the effects of high strain rate loading on RC columns using Arbitrary Lagrangian Eulerian (ALE) technique. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 2018, 34: 1–23
36
M Abedini, A Mutalib, S Raman, S Baharom, J Nouri. Prediction of residual axial load carrying capacity of reinforced concrete (RC) columns subjected to extreme dynamic loads. American Journal of Engineering and Applied Sciences, 2017, 10(2): 431–448 https://doi.org/10.3844/ajeassp.2017.431.448
37
A A Mutalib, N Mohd Tawil, S Baharom, M Abedini. Failure probabilities of FRP strengthened RC column to blast loads. Jurnal Teknologi, 2013, 65(2): 135–141 https://doi.org/10.11113/jt.v65.2202
38
K Marsh, J Campbell. The effect of strain rate on the post-yield flow of mild steel. Journal of the Mechanics and Physics of Solids, 1963, 11(1): 49–63 https://doi.org/10.1016/0022-5096(63)90007-3
39
R Alipour, A Frokhi Nejad, S Izman, M Tamin. Computer aided design and analysis of conical forming dies subjected to blast load. Applied Mechanics and Materials, 2015, 735: 50–56
40
L J Malvar. Review of static and dynamic properties of steel reinforcing bars. ACI Materials Journal, 1998, 95(5): 609–616
41
M Abedini, A A Mutalib, S N Raman. PI diagram generation for reinforced concrete (RC) columns under high impulsive loads using ALE method. Journal of Asian Scientific Research, 2017, 7(7): 253–262 https://doi.org/10.18488/journal.2.2017.77.253.262
42
E Spacone, S Limkatanyu. Responses of reinforced concrete members including bond-slip effects. Structural Journal, 2000, 97: 831–839
P Fanning. Nonlinear models of reinforced and post-tensioned concrete beams. Electronic Journal of Structural Engineering, 2001, 1: 111–119
45
F A Tavárez. Simulation of Behavior of Composite Grid Reinforced Concrete Beams Using Explicit Finite Element Methods. Madison: University of Wisconsin-Madison, 2001
46
M Abedini, A A Mutalib, S Baharom, H Hao. Reliability analysis of PI diagram formula for RC column subjected to blast load. In: Proceedings of World Academy of Science, Engineering and Technology. Kuala Lumpur, 2013, 665
47
A A Mutalib, M Abedini, S Baharom, H Hao. Derivation of empirical formulae to predict pressure and impulsive asymptotes for PI diagrams of one-way RC panels. In: Proceedings of World Academy of Science, Engineering and Technology. Kuala Lumpur, 2013, 661
48
A A Mutalib, H Hao. The effect of anchorages on FRP strengthening of RC walls to resist blast loads. Applied Mechanics and Materials, 2011, 82: 497–502
49
TM5-1300. Structures to Resist the Effects of the Accidental Explosions. New Jersey: US Department of Army, Picatinny Arsenal, 1990
50
S J Smith, D M McCann, M E Kamara. Blast Resistant Design Guide for Reinforced Concrete Structures. Skokie: Portland Cement Association, 2009