Please wait a minute...
Frontiers of Structural and Civil Engineering

ISSN 2095-2430

ISSN 2095-2449(Online)

CN 10-1023/X

Postal Subscription Code 80-968

2018 Impact Factor: 1.272

Front. Struct. Civ. Eng.    2008, Vol. 2 Issue (3) : 253-260    https://doi.org/10.1007/s11709-008-0042-6
Dynamic failure analysis on granite under uniaxial impact compressive load
ZHAI Yue1, MA Guowei2, HU Changming2, ZHAO Junhai3
1.School of Civil Engineering, Chang'an University; School of Geological Engineering and Surveying Engineering, Chang'an University; 2.Schoool of Civil and Environmental Engineering, Nanyang Technological University; 3.School of Civil Engineering, Chang'an University;
 Download: PDF(264 KB)   HTML
 Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract High strain-rate uniaxial compressive loading tests were produced in the modified split Hopkinson pressure bar (SHPB) with pulse shaper on granite samples. It was shown that the failure of the granite cylinder was typical tensile splitting failure mode by sudden splitting parallel to the direction of uniaxial compressive loading at different strain rates. Besides, it was concluded that not only the strength of granite increased, but also the fragment size decreased and the fragment numbers increased with the increasing strain rate. To quantitatively analyze the failure phenomena, the numerical calculation based on a dynamic interacting sliding microcrack model was adopted to investigate the influence of microcrack with the different initial crack length, crack angle, crack space and friction coefficient on the macro-mechanical properties of granite under different strain rates. Accordingly, the strain-dependency of the compression strength and the fragmentation degree of granite was explained reasonably.
Issue Date: 05 September 2008
 Cite this article:   
MA Guowei,ZHAI Yue,HU Changming, et al. Dynamic failure analysis on granite under uniaxial impact compressive load[J]. Front. Struct. Civ. Eng., 2008, 2(3): 253-260.
 URL:  
https://academic.hep.com.cn/fsce/EN/10.1007/s11709-008-0042-6
https://academic.hep.com.cn/fsce/EN/Y2008/V2/I3/253
1 Blanton T L . Effect of strain rate from 10-2 to 10sec-1 in uniaxial compression tests onthree rocks. Int. J. Rock Mech and Min.Sci., 1981, 18(1): 47–62.
doi:10.1016/0148‐9062(81)90265‐5
Blanton T L. Effect of strain rate from 10-2 to 10sec-1 in uniaxial compression tests onthree rocks. Int. J. Rock Mech and Min.Sci., 1981, 18(1): 47-62
doi: 10.1016/0148‐9062(81)90265‐5
Blanton T L. Effect of strain rate from 10-2 to 10sec-1 in uniaxial compression tests onthree rocks. Int. J. Rock Mech and Min.Sci., 1981, 18(1): 47-62
doi: 10.1016/0148‐9062(81)90265‐5
2 Ju Q H, Wu M B . Experimental studies of dynamiccharacteristic of rocks under uniaxial compression. Chinese Journal of Geotechnical Engineering, 1993, 15(2): 73–80 (in Chinese)
Ju Q H, Wu M B. Experimental studies of dynamiccharacteristic of rocks under uniaxial compression. Chinese Journal of Geotechnical Engineering, 1993, 15(2): 73-80(in Chinese)
Ju Q H, Wu M B. Experimental studies of dynamiccharacteristic of rocks under uniaxial compression. Chinese Journal of Geotechnical Engineering, 1993, 15(2): 73-80(in Chinese)
3 Li H B, Zhao J, Li T J . Micromechanical modelling of the mechanical propertiesof a granite under dynamic uniaxial compressive loads. International Journal of Rock Mechanics and Mining Sciences, 2000, 37: 923–935.
doi:10.1016/S1365‐1609(00)00025‐3
Li H B, Zhao J, Li T J. Micromechanical modelling of the mechanical propertiesof a granite under dynamic uniaxial compressive loads. International Journal of Rock Mechanics and Mining Sciences, 2000, 37: : 923-935
doi: 10.1016/S1365‐1609(00)00025‐3
Li H B, Zhao J, Li T J. Micromechanical modelling of the mechanical propertiesof a granite under dynamic uniaxial compressive loads. International Journal of Rock Mechanics and Mining Sciences, 2000, 37: : 923-935
doi: 10.1016/S1365‐1609(00)00025‐3
4 Nemat-Nasser S, Deng H . Strain-rate effect on brittlefailure in compression. Acta Metall Materials, 1994, 42(3): 1013–1024.
doi:10.1016/0956‐7151(94)90295‐X
Nemat-Nasser S, Deng H. Strain-rate effect on brittlefailure in compression. Acta Metall Materials, 1994, 42(3): 1013-1024
doi: 10.1016/0956‐7151(94)90295‐X
Nemat-Nasser S, Deng H. Strain-rate effect on brittlefailure in compression. Acta Metall Materials, 1994, 42(3): 1013-1024
doi: 10.1016/0956‐7151(94)90295‐X
5 Nemat-Nasser S, Obertm M . A microcrack model of dialatancyin brittle material. J. Appl. Mech., 1988, 55(1): 24–35
Nemat-Nasser S, Obertm M. A microcrack model of dialatancyin brittle material. J. Appl. Mech., 1988, 55(1): 24-35
Nemat-Nasser S, Obertm M. A microcrack model of dialatancyin brittle material. J. Appl. Mech., 1988, 55(1): 24-35
6 Ravichandran G, Subhash G . A micromechanical model forhigh strain rate behavior of ceramics. International Journal of Solids and structures, 1995, 32(17): 2627–2646.
doi:10.1016/0020‐7683(94)00286‐6
Ravichandran G, Subhash G. A micromechanical model forhigh strain rate behavior of ceramics. International Journal of Solids and structures, 1995, 32(17): 2627-2646
doi: 10.1016/0020‐7683(94)00286‐6
Ravichandran G, Subhash G. A micromechanical model forhigh strain rate behavior of ceramics. International Journal of Solids and structures, 1995, 32(17): 2627-2646
doi: 10.1016/0020‐7683(94)00286‐6
7 Horii H, Nemat-Nasser S . Brittle failure in compression:splitting, faulting, and brittle-ductile transition. Philosophical Transactions of the Royal Society of London, 1986, A319: 337–374.
doi:10.1098/rsta.1986.0101
Horii H, Nemat-Nasser S. Brittle failure in compression:splitting, faulting, and brittle-ductile transition. Philosophical Transactions of the Royal Society of London, 1986, A319: : 337-374
doi: 10.1098/rsta.1986.0101
Horii H, Nemat-Nasser S. Brittle failure in compression:splitting, faulting, and brittle-ductile transition. Philosophical Transactions of the Royal Society of London, 1986, A319: : 337-374
doi: 10.1098/rsta.1986.0101
8 Deng H, Nemat-Nasser S . Dynamic damage evolutionin brittle solids. Mechanics of Materials, 1992, 14: 83–103.
doi:10.1016/0167‐6636(92)90008‐2
Deng H, Nemat-Nasser S. Dynamic damage evolutionin brittle solids. Mechanics of Materials, 1992, 14: : 83-103
doi: 10.1016/0167‐6636(92)90008‐2
Deng H, Nemat-Nasser S. Dynamic damage evolutionin brittle solids. Mechanics of Materials, 1992, 14: : 83-103
doi: 10.1016/0167‐6636(92)90008‐2
9 Nemat-Nasser S, lsaacs J, Ravichandran G, Stamen J E .In Proc. ofTTCP TTP-1 Workshop on New Techniques of Small Scale High Strain RateStudies. Australia, 1989
Nemat-Nasser S, lsaacs J, Ravichandran G, Stamen J E, .In Proc. ofTTCP TTP-1 Workshop on New Techniques of Small Scale High Strain Rate Studies. Australia, 1989
Nemat-Nasser S, lsaacs J, Ravichandran G, Stamen J E, .In Proc. ofTTCP TTP-1 Workshop on New Techniques of Small Scale High Strain Rate Studies. Australia, 1989
10 Frew D J, Forrestal M J, Chen W . Pulse-shaping techniques for testing brittle materialswith a split Hopkinson pressure bar. ExperimentalMechanics, 2002, 42: 93–106.
doi:10.1007/BF02411056
Frew D J, Forrestal M J, Chen W. Pulse-shaping techniques for testing brittle materials with a split Hopkinson pressure bar. Experimental Mechanics, 2002, 42: : 93-106
doi: 10.1007/BF02411056
Frew D J, Forrestal M J, Chen W. Pulse-shaping techniques for testing brittle materials with a split Hopkinson pressure bar. Experimental Mechanics, 2002, 42: : 93-106
doi: 10.1007/BF02411056
11 Zhao J, Li H B, Zhao Y H . Dynamic strength tests of the Bukit Timah Granite. TechnicalReport. Singapore: Nanyang Technological University, 1998
Zhao J, Li H B, Zhao Y H. Dynamic strength tests of the Bukit Timah Granite. Technical Report. Singapore, Nanyang Technological University, 1998
Zhao J, Li H B, Zhao Y H. Dynamic strength tests of the Bukit Timah Granite. Technical Report. Singapore, Nanyang Technological University, 1998
12 Freund L B . Dynamic fracture mechanics. CambridgeUniversity Press, 1990
Freund L B. Dynamic fracture mechanics. CambridgeUniversity Press, 1990
Freund L B. Dynamic fracture mechanics. CambridgeUniversity Press, 1990
13 Tada H . Stressanalysis of cracks handbook. St Louis: Del Research Corporation, 1973
Tada H. Stressanalysis of cracks handbook. St Louis, Del Research Corporation, 1973
Tada H. Stressanalysis of cracks handbook. St Louis, Del Research Corporation, 1973
14 Fredrich J T, Evens B . Effect of grain size on brittleand semi-brittle strength: implication for micromechanics modelingof failure in compression. J Geophys Res, 1990, 95(10): 907–920
Fredrich J T, Evens B. Effect of grain size on brittleand semi-brittle strength: implication for micromechanics modelingof failure in compression. J Geophys Res, 1990, 95(10): 907-920
Fredrich J T, Evens B. Effect of grain size on brittleand semi-brittle strength: implication for micromechanics modelingof failure in compression. J Geophys Res, 1990, 95(10): 907-920
15 Dally J W, Fourney W L and Irwin G R . On the uniqueness of the stress intensityfactor-crack velocity relationship. IntJ Fract, 1985, 27: 159–168.
doi:10.1007/BF00017965
Dally J W, Fourney W L, and Irwin G R. On the uniqueness of the stress intensityfactor-crack velocity relationship. IntJ Fract, 1985, 27: : 159-168
doi: 10.1007/BF00017965
Dally J W, Fourney W L, and Irwin G R. On the uniqueness of the stress intensityfactor-crack velocity relationship. IntJ Fract, 1985, 27: : 159-168
doi: 10.1007/BF00017965
16 Ravichandran G, Chen W . Dynamic failure of brittlematerials under uniaxial compression. Kim K S. Experiments in micromechanics of failure resistant materials, 1991 : 85–90
Ravichandran G, Chen W. Dynamic failure of brittlematerials under uniaxial compression. Kim K S. Experiments in micromechanics of failure resistant materials, 1991: 85-90
Ravichandran G, Chen W. Dynamic failure of brittlematerials under uniaxial compression. Kim K S. Experiments in micromechanics of failure resistant materials, 1991: 85-90
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed