|
|
Nonlinear numerical simulation of punching shear behavior of reinforced concrete flat slabs with shear-heads |
Dan V. BOMPA(), Ahmed Y. ELGHAZOULI |
Department of Civil and Environmental Engineering, Imperial College London, London SW7 2AZ, UK |
|
|
Abstract This paper examines the structural response of reinforced concrete flat slabs, provided with fully-embedded shear-heads, through detailed three-dimensional nonlinear numerical simulations and parametric assessments using concrete damage plasticity models. Validations of the adopted nonlinear finite element procedures are carried out against experimental results from three test series. After gaining confidence in the ability of the numerical models to predict closely the full inelastic response and failure modes, numerical investigations are carried out in order to examine the influence of key material and geometric parameters. The results of these numerical assessments enable the identification of three modes of failure as a function of the interaction between the shear-head and surrounding concrete. Based on the findings, coupled with results from previous studies, analytical models are proposed for predicting the rotational response as well as the ultimate strength of such slab systems. Practical recommendations are also provided for the design of shear-heads in RC slabs, including the embedment length and section size. The analytical expressions proposed in this paper, based on a wide-ranging parametric assessment, are shown to offer a more reliable design approach in comparison with existing methods for all types of shear-heads, and are suitable for direct practical application.
|
Keywords
non-linear numerical modelling
concrete damage plasticity
RC flat slabs
shear-heads
punching shear
|
Corresponding Author(s):
Dan V. BOMPA
|
Online First Date: 16 March 2020
Issue Date: 08 May 2020
|
|
1 |
S Lips, M Fernández Ruiz, A Muttoni. Experimental investigation on punching strength and deformation capacity of shear-reinforced slabs. ACI Structural Journal, 2012, 109: 889–900
|
2 |
H G Park, Y N Kim, J G Song, S M Kang. Lattice shear reinforcement for enhancement of slab-column connections. Journal of Structural Engineering, 2012, 138(3): 425–437
https://doi.org/10.1061/(ASCE)ST.1943-541X.0000484
|
3 |
A V Gosav, Z I Kiss, T Oneţ, D V Bompa. Failure assessment of flat slab-to-column members. Magazine of Concrete Research, 2016, 68(17): 887–901
https://doi.org/10.1680/jmacr.15.00405
|
4 |
S. Bryl Flat slabs with shear-heads. Schweizerische Bauzeitung, 1969, 87(10): 181–183 (in German)
|
5 |
R Gomes, P Regan. Punching strength of slabs reinforced for shear with offcuts of rolled steel I-section beams. Magazine of Concrete Research, 1999, 51(2): 121–129
https://doi.org/10.1680/macr.1999.51.2.121
|
6 |
W G Corley, N M Hawkins. Shear-head reinforcement for slabs. ACI Journal Proceedings, 1968, 65(10): 811–824
https://doi.org/10.14359/7514
|
7 |
N W Hawkins, W G Corley. Moment transfer to columns in slabs with shear-head reinforcement. Special Publication, 1974, 42: 847–880
|
8 |
R K Al-Hamd, M Gillie, L S Cunningham, H Warren, A S Albostami. Novel shear-head reinforcement for slab-column connections subject to eccentric load and fire. Archives of Civil and Mechanical Engineering, 2019, 19(2): 503–524
https://doi.org/10.1016/j.acme.2018.12.011
|
9 |
B Ngekpe, S Abbey, A Olubanwo. Structural performance of a modified shear-head assembly for edge steel column embedded in reinforced concrete slab. Engineering Solid Mechanics, 2019, 7(1): 59–70
https://doi.org/10.5267/j.esm.2018.11.001
|
10 |
S G Gilbert, C Glass. Punching failure of reinforced concrete flat slabs at edge columns. Structural Engineer. Part B, 1987, 65: 16–28
|
11 |
A Kenel, T. Keller External Steel Shear Heads for Retroactive Enhancement of Punching Shear Strength in Existing Flat Slabs. Technical Report. F. J. Aschwanden AG, CH-3250. 2013
|
12 |
D V Bompa, A Y Elghazouli. Structural performance of RC flat slabs connected to steel columns with shear-heads. Engineering Structures, 2016, 117: 161–183
https://doi.org/10.1016/j.engstruct.2016.03.022
|
13 |
J Kahn. US Patent, 926,497. 1909
|
14 |
R M Hardison. US Patent, 1,550,317. 1925
|
15 |
W H Wheeler. Thin flat-slab floors prove rigid under test. Engineering News Record, 1936, 116(2): 49–50
|
16 |
T Godycki, J Kozicki. Eccentrically loaded interior slab-column connections with shear-head reinforcement. Materials and Structures, 1984, 17(2): 145–148
https://doi.org/10.1007/BF02473666
|
17 |
M M Majeed, A N. Abbas Punching shear strength characteristics of flat plate panels reinforced with shear-head collars: Experimental investigation. Civil Engineering Journal, 2019, 5(3): 528–539
|
18 |
K M Huber, S Bryl. Discussion of “Shear reinforcement for concrete slabs” by Walter H. Dilger and Amin Ghali (December, 1981). Journal of Structural Engineering, 1984, 110(1): 169–171
https://doi.org/10.1061/(ASCE)0733-9445(1984)110:1(169)
|
19 |
T Frangi, D Tonis, A Muttoni. Assessment of column supports made of steel. Schweizer Ingenieur und Architekt, 1997, 1997: 12–14 (in German)
|
20 |
P S Chana, F K Birjandi. Design Guidance on Structural Steel Shear-Heads in Concrete (Shear-Head Development Tests). Concrete Research and Innovation Centre, Imperial College, London. Report No. CRIC95/001/F. 1996
|
21 |
W Piel, G Hanswille. Composite shear-head systems for improved punching shear resistance of flat slabs. Construction in Steel and Concrete, 2006, V: 226–235
https://doi.org/10.1061/40826(186)22
|
22 |
A Y Elghazouli, B A Izzuddin. Realistic modeling of composite and reinforced concrete floor slabs under extreme loading. II: Verification and application. Journal of Structural Engineering, 2004, 130(12): 1985–1996
https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1985)
|
23 |
J M Castro, A Y Elghazouli, B A Izzuddin. Modelling of the panel zone in steel and composite moment frames. Engineering Structures, 2005, 27(1): 129–144
https://doi.org/10.1016/j.engstruct.2004.09.008
|
24 |
J M Castro, A Y Elghazouli, B A Izzuddin. Assessment of effective slab widths in composite beams. Journal of Constructional Steel Research, 2007, 63(10): 1317–1327
https://doi.org/10.1016/j.jcsr.2006.11.018
|
25 |
J Lemaitre. Evaluation of dissipation and damage in metals submitted to dynamic loading. In: Proceedings of International Conference of Mechanical Behavior of Materials 1 (ICM 1). Kyoto: The Society of Material Science, 1971, 1–20
|
26 |
Z P Bažant, B H Oh. Crack band theory for fracture of concrete. Matériaux et Constructions, 1983, 16(3): 155–177
https://doi.org/10.1007/BF02486267
|
27 |
M Jirásek, T Zimmermann. Rotating crack model with transition to scalar damage. Journal of Engineering Mechanics, 1998, 124(3): 277–284
https://doi.org/10.1061/(ASCE)0733-9399(1998)124:3(277)
|
28 |
J Ozbolt. Size effect and ductility of concrete and reinforced concrete structures. Dissertation for Habilitation. Stuttgart: Universität Stuttgart, 1995
|
29 |
T Rabczuk, J Akkermann, J Eibl. A numerical model for reinforced concrete structures. International Journal of Solids and Structures, 2005, 42(5–6): 1327–1354
https://doi.org/10.1016/j.ijsolstr.2004.07.019
|
30 |
T N Bittencourt, P A Wawrzynek, A R Ingraffea, J L Sousa. Quasi-automatic simulation of crack propagation for 2D LEFM problems. Engineering Fracture Mechanics, 1996, 55(2): 321–334
https://doi.org/10.1016/0013-7944(95)00247-2
|
31 |
S Loehnert, T Belytschko. A multiscale projection method for macro/microcrack simulations. International Journal for Numerical Methods in Engineering, 2007, 71(12): 1466–1482
https://doi.org/10.1002/nme.2001
|
32 |
J Oliyer. Continuum modelling of strong discontinuities in solid mechanics using damage models. Computational Mechanics, 1995, 17(1–2): 49–61
https://doi.org/10.1007/BF00356478
|
33 |
P Areias, T Rabczuk. Finite strain fracture of plates and shells with configurational forces and edge rotations. International Journal for Numerical Methods in Engineering, 2013, 94(12): 1099–1122
https://doi.org/10.1002/nme.4477
|
34 |
P Areias, T Rabczuk, P P Camanho. Finite strain fracture of 2D problems with injected anisotropic softening elements. Theoretical and Applied Fracture Mechanics, 2014, 72: 50–63
https://doi.org/10.1016/j.tafmec.2014.06.006
|
35 |
X Teng, T Wierzbicki. Evaluation of six fracture models in high velocity perforation. Engineering Fracture Mechanics, 2006, 73(12): 1653–1678
https://doi.org/10.1016/j.engfracmech.2006.01.009
|
36 |
J Oliver. A consistent characteristic length for smeared cracking models. International Journal for Numerical Methods in Engineering, 1989, 28(2): 461–474
https://doi.org/10.1002/nme.1620280214
|
37 |
R Fan, J Fish. The RS-method for material failure simulations. International Journal for Numerical Methods in Engineering, 2008, 73(11): 1607–1623
https://doi.org/10.1002/nme.2134
|
38 |
D V Swenson, A R Ingraffea. Modeling mixed-mode dynamic crack propagation using finite elements: Theory and applications. Computational Mechanics, 1988, 3(6): 381–397
https://doi.org/10.1007/BF00301139
|
39 |
G T Camacho, M Ortiz. Computational modelling of impact damage in brittle materials. International Journal of Solids and Structures, 1996, 33(20–22): 2899–2938
https://doi.org/10.1016/0020-7683(95)00255-3
|
40 |
G Lilliu, J G M. van Mier Simulation of 3D crack propagation with the lattice model. In: Proceedings of the International Congress on Advanced Materials, Processes and Applications (Materials Week). Frankfurt: Bauverlag BV GambH, 2000
|
41 |
J Oliver. On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations. International Journal of Solids and Structures, 2000, 37(48–50): 7207–7229
https://doi.org/10.1016/S0020-7683(00)00196-7
|
42 |
J H Song, P M A Areias, T Belytschko. A method for dynamic crack and shear band propagation with phantom nodes. International Journal for Numerical Methods in Engineering, 2006, 67(6): 868–893
https://doi.org/10.1002/nme.1652
|
43 |
T Rabczuk, T Belytschko. Cracking particles: A simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343
https://doi.org/10.1002/nme.1151
|
44 |
T Rabczuk, G Zi. A meshfree method based on the local partition of unity for cohesive cracks. Computational Mechanics, 2007, 39(6): 743–760
https://doi.org/10.1007/s00466-006-0067-4
|
45 |
T Rabczuk, G Zi, S Bordas, H Nguyen-Xuan. A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 2008, 75(16): 4740–4758
https://doi.org/10.1016/j.engfracmech.2008.06.019
|
46 |
T Rabczuk, T Belytschko. Application of particle methods to static fracture of reinforced concrete structures. International Journal of Fracture, 2006, 137(1–4): 19–49
https://doi.org/10.1007/s10704-005-3075-z
|
47 |
T Rabczuk, T Belytschko. A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196(29–30): 2777–2799
https://doi.org/10.1016/j.cma.2006.06.020
|
48 |
T Rabczuk, G Zi, S Bordas, H Nguyen-Xuan. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering, 2010, 199(37–40): 2437–2455
https://doi.org/10.1016/j.cma.2010.03.031
|
49 |
T Rabczuk, S Bordas, G Zi. On three-dimensional modelling of crack growth using partition of unity methods. Computers and Structures, 2010, 88(23–24): 1391–1411
|
50 |
P Areias, M A Msekh, T Rabczuk. Damage and fracture algorithm using the screened Poisson equation and local remeshing. Engineering Fracture Mechanics, 2016, 158: 116–143
https://doi.org/10.1016/j.engfracmech.2015.10.042
|
51 |
P Areias, T Rabczuk. Steiner-point free edge cutting of tetrahedral meshes with applications in fracture. Finite Elements in Analysis and Design, 2017, 132: 27–41
https://doi.org/10.1016/j.finel.2017.05.001
|
52 |
P Areias, T Rabczuk, M A Msekh. Phase-field analysis of finite-strain plates and shells including element subdivision. Computer Methods in Applied Mechanics and Engineering, 2016, 312: 322–350
https://doi.org/10.1016/j.cma.2016.01.020
|
53 |
P Areias, J Reinoso, P P Camanho, J César de Sá, T Rabczuk. Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation. Engineering Fracture Mechanics, 2018, 189: 339–360
https://doi.org/10.1016/j.engfracmech.2017.11.017
|
54 |
L Kachanov. Rupture time under creep conditions. Izvestiia Akademii Nauk SSSR. Seriia Khimicheskaia, 1958, 8: 26–31
|
55 |
U Cicekli, G Z Voyiadjis, R K Abu Al-Rub. A plasticity and anisotropic damage model for plain concrete. International Journal of Plasticity, 2007, 23(10–11): 1874–1900
https://doi.org/10.1016/j.ijplas.2007.03.006
|
56 |
P Grassl, M Jirásek. Damage-plastic model for concrete failure. International Journal of Solids and Structures, 2006, 43(22–23): 7166–7196
https://doi.org/10.1016/j.ijsolstr.2006.06.032
|
57 |
J Lee, G L Fenves. Plastic-damage model for cyclic loading of concrete structures. Journal of Engineering Mechanics, 1998, 124(8): 892–900
https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
|
58 |
B Xu, D V Bompa, A Y Elghazouli, A M Ruiz-Teran, P J Stafford. Behaviour of rubberised concrete members in asymmetric shear tests. Construction & Building Materials, 2018, 159: 361–375
https://doi.org/10.1016/j.conbuildmat.2017.10.091
|
59 |
D V Bompa, A Y Elghazouli. Monotonic and cyclic performance of threaded reinforcement splices. Structures, 2018, 16: 358–372
https://doi.org/10.1016/j.istruc.2018.11.009
|
60 |
R V Gorga, L F Sanchez, B Martín-Pérez. FE approach to perform the condition assessment of a concrete overpass damaged by ASR after 50 years in service. Engineering Structures, 2018, 177: 133–146
https://doi.org/10.1016/j.engstruct.2018.09.043
|
61 |
B Belletti, A Muttoni, S Ravasini, F Vecchi. Parametric analysis on punching shear resistance of reinforced concrete continuous slabs. Magazine of Concrete Research, 2018, 12: 1–32
https://doi.org/10.1680/jmacr.18.00123
|
62 |
A Marí, A Cladera, E Oller, J M Bairán. A punching shear mechanical model for reinforced concrete flat slabs with and without shear reinforcement. Engineering Structures, 2018, 166: 413–426
https://doi.org/10.1016/j.engstruct.2018.03.079
|
63 |
A Wosatko, J Pamin, M A Polak. Application of damage-plasticity models in finite element analysis of punching shear. Computers & Structures, 2015, 151: 73–85
https://doi.org/10.1016/j.compstruc.2015.01.008
|
64 |
M I Moharram, D V Bompa, A Y. Elghazouli Performance and design of shear-keys in hybid RC beam and steel column systems. Ce/Papers, 2017, 1(2–3): 2031–2040
|
65 |
D V Bompa, A Y. Elghazouli Force transfer mechanisms between steel columns and reinforced concrete beams by means of shear keys. In: Proceedings of EUROSTEEL 2014: The 7th European Conference on Steel and Composite Structures. Napoli: ECCS, 2014, 10–12
|
66 |
H Behnam, J S Kuang, B Samali. Parametric finite element analysis of RC wide beam-column connections. Computers & Structures, 2018, 205: 28–44
https://doi.org/10.1016/j.compstruc.2018.04.004
|
67 |
J D Nzabonimpa, W K Hong, J Kim. Nonlinear finite element model for the novel mechanical beam-column joints of precast concrete-based frames. Computers & Structures, 2017, 189: 31–48
https://doi.org/10.1016/j.compstruc.2017.04.016
|
68 |
M A Eder, R L Vollum, A Y Elghazouli, T Abdel-Fattah. Modelling and experimental assessment of punching shear in flat slabs with shear-heads. Engineering Structures, 2010, 32(12): 3911–3924
https://doi.org/10.1016/j.engstruct.2010.09.004
|
69 |
D V Bompa, A Y Elghazouli. Numerical modelling and parametric assessment of hybrid flat slabs with steel shear heads. Engineering Structures, 2017, 142: 67–83
https://doi.org/10.1016/j.engstruct.2017.03.070
|
70 |
D V Bompa, A Y Elghazouli. Ultimate behaviour and design of hybrid flat slabs with steel shear heads. Ce/Papers, 2017, 1(2–3): 2310–2319
|
71 |
B Burley, T. Boothby Medical Office Building Malvern, PA. Final Report. Penn State University, Technical Report. 2005
|
72 |
M N Gnädinger. Punching shear strength of flat slabs with shear-heads. Thesis for the Master’s Degree. Lucerne: Hochschule Luzern, 2011
|
73 |
K De Sutter. Numerical investigation of the punching shear behaviour of flat plates with column head strengthening. Thesis for the Master’s Degree. Munchen: Technische Universitat Munchen, 2015
|
74 |
J Hugenschmidt, A Fischer, L Schiavi. Investigation of punching reinforcement in flat slabs. Beton- und Stahlbetonbau, 2014, 109(4): 257–264 (In German)
https://doi.org/10.1002/best.201300086
|
75 |
A Zhang, X Ma, H Fang, J Mu, T Liu. Seismic behaviour of connections between prefabricated RC flat slabs and square steel tube columns. Engineering Structures, 2018, 173: 800–812
https://doi.org/10.1016/j.engstruct.2018.07.040
|
76 |
J W Kim, C H Lee, T H K Kang. Shear-head reinforcement for concrete slab to concrete-filled tube column connections. ACI Structural Journal, 2014, 111(3): 629–638
https://doi.org/10.14359/51686623
|
77 |
BCA (British Cement Association). Prefabricated Punching Shear Reinforcement for Reinforced Concrete Flat Slabs. Technical Report. 2001
|
78 |
CEN (European Committee for Standardization). EN 1992-1-1. Eurocode 2: Design of Concrete Structures—Part 1-1: General Rules and Rules for Buildings. Brussels: CEN, 2004
|
79 |
The International Federation for Structural Concrete: FIB. FIB Bulletin No. 66-Model Code 2010—Final draft, Vol 2. Lausanne: The International Federation for Structural Concrete: FIB, 2012
|
80 |
ACI (American Concrete Institute). ACI 318M-14 Building Code Requirements for Structural Concrete and Commentary. Farmington Hills, MI: ACI, 2014
|
81 |
S Guandalini, O L Burdet, A Muttoni. Punching tests of slabs with low reinforcement ratios. ACI Structural Journal, 2009, 106: 87–95
https://doi.org/10.14359/56287
|
82 |
DSS (Dassault Systèmes Simulia Corp). ABAQUS Analysis User’s Manual 6.14-2. Providence, RI: DSS, 2014
|
83 |
M I Moharram, D V Bompa, A Y Elghazouli. Experimental and numerical assessment of mixed RC beam and steel column systems. Journal of Constructional Steel Research, 2017, 131: 51–67
https://doi.org/10.1016/j.jcsr.2016.12.019
|
84 |
D A Hordijk. Local approach to fatigue of concrete. Dissertation for the Doctoral Degree. Delft: Delft University of Technology, 1991
|
85 |
D V Bompa, T Onet. Punching shear strength of RC flat slabs at interior connections to columns. Magazine of Concrete Research, 2016, 68(1): 24–42
https://doi.org/10.1680/macr.14.00402
|
86 |
A S Genikomsou, M A Polak. Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS. Engineering Structures, 2015, 98: 38–48
https://doi.org/10.1016/j.engstruct.2015.04.016
|
87 |
D V Bompa, T Onet. Identification of concrete damaged plasticity constitutive parameters. In: The National Technical Scientific Conference—Modern Technologies for the 3rd Millenium. Oradea: University of Oradea, 2010
|
88 |
P Baltay, A Gjelsvik. Coefficient of friction for steel on concrete at high normal stress. Journal of Materials in Civil Engineering, 1990, 2(1): 46–49
https://doi.org/10.1061/(ASCE)0899-1561(1990)2:1(46)
|
89 |
B G Rabbat, H G Russell. Friction coefficient of steel on concrete or grout. Journal of Structural Engineering, 1985, 111(3): 505–515
https://doi.org/10.1061/(ASCE)0733-9445(1985)111:3(505)
|
90 |
A Muttoni. Punching shear strength of reinforced concrete slabs without transverse reinforcement. ACI Structural Journal, 2008, 105(4): 440–450
https://doi.org/10.14359/19858
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|