|
|
Two-dimensional beam shaping and homogenization of high power laser diode stack with rectangular waveguide |
Yuchen SONG, Yunfeng CHEN, Jianguo XIN(), Teng SUN |
School of Information and Electronics, Beijing Institute of Technology, Beijing 100081, China |
|
|
Abstract In this paper, the research work of two-dimensional beam shaping and homogenization of high power laser diode (LD) stack by a rectangular waveguide is presented. Both the theoretical simulation and experiment results have shown that the diode stack beam can be shaped into a uniform square spot with a dimension of 10 mm × 10 mm and the non-uniformity less than 5% along both directions of slow axis and fast axis, the shaped beam has a uniform pumping depth over 10 mm, which is well to be used for a rectangular laser medium end pumping.
|
Keywords
beam shaping
high power laser diode (LD) stack
laser end pumping
|
Corresponding Author(s):
Jianguo XIN
|
Just Accepted Date: 09 July 2018
Online First Date: 01 August 2018
Issue Date: 16 September 2019
|
|
1 |
F Bachmann, R Poprawe, P Loosen. High Power Diode Lasers. New York: Springer, 2007, 285–533
|
2 |
F M Dickey. Laser Beam Shaping: Theory and Techniques. 2nd ed. New York: CRC Press, 2014, 269–306
|
3 |
R E Grojean, D Feldman, J F Roach. Production of flat top beam profiles for high energy lasers. Review of Scientific Instruments, 1980, 51(3): 375–376
https://doi.org/10.1063/1.1136222
pmid: 18647071
|
4 |
J M Geary. Channel integrator for laser beam uniformity on target. Optical Engineering (Redondo Beach, Calif.), 1988, 27(11): 972–977
https://doi.org/10.1117/12.7976795
|
5 |
J C Ion. Laser Processing of Engineering Materials. Amsterdam: Elsevier, 2005, 117–118
|
6 |
K Iwasaki, T Hayashi, T Goto, S Shimizu. Square and uniform laser output device: theory and applications. Applied Optics, 1990, 29(12): 1736–1744
https://doi.org/10.1364/AO.29.001736
pmid: 20563075
|
7 |
M Traub, H Hoffmann, H Plum, K Wieching, P Loosen, R Poprawe. Homogenization of high power diode laser beams for pumping and direct applications. In: Proceedings of SPIE 6104, High-Power Diode Laser Technology and Applications IV, 2006, 6104: 61040Q-1–61040Q-10
|
8 |
B Köhler, T Brand. 11-kW direct diode laser system with homogenized 55 × 20 mm2 Top-Hat intensity distribution. In: Proceedings of SPIE 6456, High-Power Diode Laser Technology and Applications V, 2007, 6456(11): 64560O-1–64560O-12
|
9 |
M Laurenzis, Y Lutz, F Christnacher, A Matwyschuk, J Poyet. Homogeneous and speckle-free laser illumination for range-gated imaging and active polarimetry. Optical Engineering (Redondo Beach, Calif.), 2012, 51(6): 061302
https://doi.org/10.1117/1.OE.51.6.061302
|
10 |
Y Lutz, J M Poyet. Laser diode stack beam shaping for efficient and compact long-range laser illuminator design. Optics & Laser Technology, 2014, 57(7): 90–95
https://doi.org/10.1016/j.optlastec.2013.09.015
|
11 |
Y Lutz, , Laurenzis M. Beam shaping of laser diode stacks for compact and efficient illumination devices at the French-German Research Institute of Saint-Louis. Advances in Optical Technologies, 2014, 3(2): 179–185
https://doi.org/10.1515/aot-2013-0060
|
12 |
M Slimani, J Liu, J Xin, J Chen. Beam shaping of high power diode laser stack into homogeneous line. Frontiers of Optoelectronics, 2014, 7(1): 102–106
https://doi.org/10.1007/s12200-014-0382-x
|
13 |
N Coluccelli. Nonsequential modeling of laser diode stacks using Zemax: simulation, optimization, and experimental validation. Applied Optics, 2010, 49(22): 4237–4245
https://doi.org/10.1364/AO.49.004237
pmid: 20676178
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|