1. Key Laboratory of Organosilicon Chemistry and Materials Technology of Ministry of Education, Hangzhou Normal University, Hangzhou 311121, China 2. Collaborative Innovation Center of Zhejiang Province for Manufacturing of Fluorine Silicon Fine Chemicals and Materials, Hangzhou Normal University, Hangzhou 311121, China 3. Transfar Zhilian Co., Ltd., Hangzhou 311215, China
A facile strategy was developed to fabricate flexible polyurethane (PU) foam composites with exceptional flame retardancy. The approach involves the incorporation of graphene oxide (GO) into a silicone resin (SiR) solution, which is then deposited onto a PU foam surface via the dip-coating technique and cured. Fourier-transform infrared spectroscopy, scanning electron microscopy, and Raman spectroscopy measurements demonstrated that the SiR and GO were successfully coated onto the PU skeleton and the intrinsic porous structure of the PU foam remained intact. The effects of SiR and GO on the mechanical and thermal stability and flame retardancy of PU composites were evaluated through compression tests, thermogravimetric analysis, vertical combustion tests, and the limiting oxygen index. The measurement results revealed that the composites (PU@SiR-GO) showed superior flame retardancy and thermal and mechanical stability compared to pristine PU or PU coated with SiR alone. The mechanical and thermal stability and the flame-retardant properties of the PU composites were enhanced significantly with increasing GO content. Based on the composition, microstructure, and surface morphology of PU@SiR-GO composites before and after combustion tests, a possible flame-retardance mechanism is proposed. This work provides a simple and effective strategy for fabricating flame-retardant composites with improved mechanical performance.
J Lefebvre, B Bastin, M Le Bras, S Duquesne, R Paleja, R Delobel. Thermal stability and fire properties of conventional flexible polyurethane foam formulations. Polymer Degradation & Stability, 2005, 88(1): 28–34 https://doi.org/10.1016/j.polymdegradstab.2004.01.025
2
K Song, Y Zhang, J Meng, E C Green, N Tajaddod, H Li, M L Minus. Structural polymer-based carbon nanotube composite fibers: understanding the processing-structure-performance relationship. Materials (Basel), 2013, 6(6): 2543–2577 https://doi.org/10.3390/ma6062543
3
K M Zia, H N Bhatti, I Ahmad Bhatti. Methods for polyurethane and polyurethane composites, recycling and recovery: a review. Reactive & Functional Polymers, 2007, 67(8): 675–692 https://doi.org/10.1016/j.reactfunctpolym.2007.05.004
4
H Tian, Y Yao, S Zhang, Y Wang, A Xiang. Enhanced thermal stability and flame resistance of rigid polyurethane-imide foams by varying copolymer composition. Polymer Testing, 2018, 67: 68–74 https://doi.org/10.1016/j.polymertesting.2018.02.020
5
M Haile, S Fomete, I D Lopez, J C Grunlan. Aluminum hydroxide multilayer assembly capable of extinguishing flame on polyurethane foam. Journal of Materials Science, 2016, 51(1): 375–381 https://doi.org/10.1007/s10853-015-9258-8
6
C Denecker, J Liggat, C Snape. Relationship between the thermal degradation chemistry and flammability of commercial flexible polyurethane foams. Journal of Applied Polymer Science, 2006, 100(4): 3024–3033 https://doi.org/10.1002/app.23701
7
C Q Wang, F Y Ge, J Sun, Z S Cai. Effects of expandable graphite and dimethyl methylphosphonate on mechanical, thermal, and flame-retardant properties of flexible polyurethane foams. Journal of Applied Polymer Science, 2013, 130(2): 916–926 https://doi.org/10.1002/app.39252
8
S Bourbigot, S Duquesne. Fire retardant polymers: recent developments and opportunities. Journal of Materials Chemistry, 2007, 17(22): 2283–2300 https://doi.org/10.1039/b702511d
9
A A Cain, C R Nolen, Y C Li, R Davis, J C Grunlan. Phosphorous-filled nanobrick wall multilayer thin film eliminates polyurethane melt dripping and reduces heat release associated with fire. Polymer Degradation & Stability, 2013, 98(12): 2645–2652 https://doi.org/10.1016/j.polymdegradstab.2013.09.028
10
M Zhang, J Zhang, S Chen, Y Zhou, Z Luo. Effects of a novel phosphorus-nitrogen flame retardant on rosin-based rigid polyurethane foams. Polymer Degradation & Stability, 2015, 120: 427–434 https://doi.org/10.1016/j.polymdegradstab.2015.08.001
11
R Yang, W Hu, L Xu, Y Song, J Li. Synthesis, mechanical properties and fire behaviors of rigid polyurethane foam with a reactive flame retardant containing phosphazene and phosphate. Polymer Degradation & Stability, 2015, 122: 102–109 https://doi.org/10.1016/j.polymdegradstab.2015.10.007
12
L Zhang, F Wang, X Zhang, J J Zou. Synthesis of aluminum nanoparticles as additive to enhance ignition and combustion of high energy density fuels. Frontiers of Chemical Science and Engineering, 2018, 12(3): 358–366 https://doi.org/10.1007/s11705-018-1702-2
13
H Yang, X Wang, L Song, B Yu, Y Yuan, Y Hu, R K K Yuen. Aluminum hypophosphite in combination with expandable graphite as a novel flame retardant system for rigid polyurethane foams. Polymers for Advanced Technologies, 2014, 25(9): 1034–1043 https://doi.org/10.1002/pat.3348
14
X Wang, P Zhang, Z Huang, W Xing, L Song, Y Hu. Effect of aluminum diethylphosphinate on the thermal stability and flame retardancy of flexible polyurethane foams. Fire Safety Journal, 2019, 106: 72–79 https://doi.org/10.1016/j.firesaf.2019.04.001
15
S Bourbigot, M L Bras, R Leeuwendal, K K Shen, D Schubert. Recent advances in the use of zinc borates in flame retardancy of eva. Polymer Degradation & Stability, 1999, 64(3): 419–425 https://doi.org/10.1016/S0141-3910(98)00130-X
16
Y Gao, J Wu, Q Wang, C Wilkie, D O’Hare. Flame retardant polymer/layered double hydroxide nanocomposites. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2014, 2(29): 10996–11016 https://doi.org/10.1039/c4ta01030b
17
Q Wu, L Gong, Y Li, C Cao, L Tang, L Wu, L Zhao, G Zhang, S Li, J Gao, Y Li, Y W Mai. Efficient flame detection and early warning sensors on combustible materials using hierarchical graphene oxide/silicone coatings. ACS Nano, 2018, 12(1): 416–424 https://doi.org/10.1021/acsnano.7b06590
18
C Liu, Y Fang, X Miao, Y Pei, Y Yan, W Xiao, L Wu. Facile fabrication of superhydrophobic polyurethane sponge towards oil-water separation with exceptional flame-retardant performance. Separation and Purification Technology, 2019, 229: 115801 https://doi.org/10.1016/j.seppur.2019.115801
19
Y Li, Y S Kim, J Shields, R Davis. Controlling polyurethane foam flammability and mechanical behaviour by tailoring the composition of clay-based multilayer nanocoatings. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2013, 1(41): 12987–12997 https://doi.org/10.1039/c3ta11936j
20
W Wang, Y Pan, H Pan, W Yang, K M Liew, L Song, Y Hu. Synthesis and characterization of MnO2 nanosheets based multilayer coating and applications as a flame retardant for flexible polyurethane foam. Composites Science and Technology, 2016, 123: 212–221 https://doi.org/10.1016/j.compscitech.2015.12.014
21
H Pan, Q Shen, Z Zhang, B Yu, Y Lu. MoS2-filled coating on flexible polyurethane foam via layer-by-layer assembly technique: flame-retardant and smoke suppression properties. Journal of Materials Science, 2018, 53(12): 9340–9349 https://doi.org/10.1007/s10853-018-2199-2
22
A A Cain, M G B Plummer, S E Murray, L Bolling, O Regev, J C Grunlan. Iron-containing, high aspect ratio clay as nanoarmor that imparts substantial thermal/flame protection to polyurethane with a single electrostatically-deposited bilayer. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2014, 2(41): 17609–17617 https://doi.org/10.1039/C4TA03541K
23
Y S Kim, R Harris, R Davis. Innovative approach to rapid growth of highly clay-filled coatings on porous polyurethane foam. ACS Macro Letters, 2012, 1(7): 820–824 https://doi.org/10.1021/mz300102h
24
J H Cho, V Vasagar, K Shanmuganathan, A R Jones, S Nazarenko, C J Ellison. Bioinspired catecholic flame retardant nanocoating for flexible polyurethane foams. Chemistry of Materials, 2015, 27(19): 6784–6790 https://doi.org/10.1021/acs.chemmater.5b03013
25
G Laufer, C B Kirkland, A Morgan, J Grunlan. Exceptionally flame retardant sulfur-based multilayer nanocoating for polyurethane prepared from aqueous polyelectrolyte solutions. ACS Macro Letters, 2013, 2(5): 361–365 https://doi.org/10.1021/mz400105e
26
X Mu, B Yuan, Y Pan, X Feng, L Duan, R Zong, Y Hu. A single a-cobalt hydroxide/sodium alginate bilayer layer-by-layer assembly for conferring flame retardancy to flexible polyurethane foams. Materials Chemistry and Physics, 2017, 191: 52–61 https://doi.org/10.1016/j.matchemphys.2017.01.023
27
Y Pan, L Liu, W Cai, Y Hu, S Jiang, H Zhao. Effect of layer-by-layer self-assembled sepiolite-based nanocoating on flame retardant and smoke suppressant properties of flexible polyurethane foam. Applied Clay Science, 2019, 168: 230–236 https://doi.org/10.1016/j.clay.2018.11.014
28
W Wang, H Pan, B Yu, Y Pan, L Song, K M Liew, Y Hu. Fabrication of carbon black coated flexible polyurethane foam for significantly improved fire safety. RSC Advances, 2015, 5(69): 55870–55878 https://doi.org/10.1039/C5RA06170A
29
F Carosio, A Fina. Three organic/inorganic nanolayers on flexible foam allow retaining superior flame retardancy performance upon mechanical compression cycles. Frontiers in Materials, 2019, 6: 20 https://doi.org/10.3389/fmats.2019.00020
30
K M Holder, A A Cain, M G Plummer, B E Stevens, P K Odenborg, A B Morgan, J C Grunlan. Carbon nanotube multilayer nanocoatings prevent flame spread on flexible polyurethane foam. Macromolecular Materials and Engineering, 2016, 301(6): 665–673 https://doi.org/10.1002/mame.201500327
31
X Zhang, Q Shen, X Zhang, H Pan, Y Lu. Graphene oxide-filled multilayer coating to improve flame-retardant and smoke suppression properties of flexible polyurethane foam. Journal of Materials Science, 2016, 51(23): 10361–10374 https://doi.org/10.1007/s10853-016-0247-3
32
Q Wu, Q Zhang, L Zhao, S Li, L Wu, J Jiang, L Tang. A novel and facile strategy for highly flame retardant polymer foam composite materials: transforming silicone resin coating into silica self-extinguishing layer. Journal of Hazardous Materials, 2017, 336: 222–231 https://doi.org/10.1016/j.jhazmat.2017.04.062
33
H Xie, W Yang, A C Y Yuen, C Xie, J Xie, H Lu, G H Yeoh. Study on flame retarded flexible polyurethane foam/alumina aerogel composites with improved fire safety. Chemical Engineering Journal, 2017, 311: 310–317 https://doi.org/10.1016/j.cej.2016.11.110
34
Y S Kim, R Davis, A A Cain, J C Grunlan. Development of layer-by-layer assembled carbon nanofiber-filled coatings to reduce polyurethane foam flammability. Polymer, 2011, 52(13): 2847–2855 https://doi.org/10.1016/j.polymer.2011.04.023
35
P Chen, Y Zhao, W Wang, T Zhang, S Song. Correlation of montmorillonite sheet thickness and flame retardant behavior of a chitosan-montmorillonite nanosheet membrane assembled on flexible polyurethane foam. Polymers, 2019, 11(2): 213 https://doi.org/10.3390/polym11020213
36
Y Hai, C Wang, S Jiang, X Liu. Layer-by-layer assembly of aerogel and alginate toward self-extinguishing flexible polyurethane foam. Industrial & Engineering Chemistry Research, 2020, 59(1): 475–483 https://doi.org/10.1021/acs.iecr.9b05590
37
B Lin, A C Y Yuen, A Li, Y Zhang, T B Y Chen, B Yu, E W M Lee, S Peng, W Yang, H Lu, Q N Chan, G H Yeoh, C H Wang. Mxene/chitosan nanocoating for flexible polyurethane foam towards remarkable fire hazards reductions. Journal of Hazardous Materials, 2020, 381: 120952 https://doi.org/10.1016/j.jhazmat.2019.120952
38
H Pan, Y Pan, W Wang, L Song, Y Hu, K M Liew. Synergistic effect of layer-by-layer assembled thin films based on clay and carbon nanotubes to reduce the flammability of flexible polyurethane foam. Industrial & Engineering Chemistry Research, 2014, 53(37): 14315–14321 https://doi.org/10.1021/ie502215p
39
X Ji, Y Xu, W Zhang, L Cui, J Liu. Review of functionalization, structure and properties of graphene/polymer composite fibers. Composites. Part A, Applied Science and Manufacturing, 2016, 87: 29–45 https://doi.org/10.1016/j.compositesa.2016.04.011
40
M J Nine, M A Cole, D N H Tran, D Losic. Graphene: a multipurpose material for protective coatings. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2015, 3(24): 12580–12602 https://doi.org/10.1039/C5TA01010A
41
L Maddalena, F Carosio, J Gomez, G Saracco, A Fina. Layer-by-layer assembly of efficient flame retardant coatings based on high aspect ratio graphene oxide and chitosan capable of preventing ignition of PU foam. Polymer Degradation & Stability, 2018, 152: 1–9 https://doi.org/10.1016/j.polymdegradstab.2018.03.013
42
Y Li, S Mannen, J Schulz, J C Grunlan. Growth and fire protection behavior of poss-based multilayer thin films. Journal of Materials Chemistry, 2011, 21(9): 3060–3069 https://doi.org/10.1039/c0jm03752d
43
Z Yang, S Han, R Zhang, S Feng, C Zhang, S Zhang. Effects of silphenylene units on the thermal stability of silicone resins. Polymer Degradation & Stability, 2011, 96(12): 2145–2151 https://doi.org/10.1016/j.polymdegradstab.2011.09.014
S Hamdani, C Longuet, D Perrin, J Lopez-cuesta, F Ganachaud. Flame retardancy of silicone-based materials. Polymer Degradation & Stability, 2009, 94(4): 465–495 https://doi.org/10.1016/j.polymdegradstab.2008.11.019
46
P Jia, H Liu, Q Liu, X Cai. Thermal degradation mechanism and flame retardancy of MQ silicone/epoxy resin composites. Polymer Degradation & Stability, 2016, 134: 144–150 https://doi.org/10.1016/j.polymdegradstab.2016.09.029
47
W S Hummers Jr, R E Offeman. Preparation of graphitic oxide. Journal of the American Chemical Society, 1958, 80(6): 1339–1339 https://doi.org/10.1021/ja01539a017
48
R Davis, Y Li, Y S R Kim, J Shields. Controlling foam flammability and mechanical behavior by tailoring the composition of clay-based multilayer nanocoatings. Advanced Functional Materials, 2013, 41(1): 12987–12997
49
Y Wan, L Tang, L Gong, D Yan, Y Li, L Wu, J Jiang, G Lai. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties. Carbon, 2014, 69(2): 467–480 https://doi.org/10.1016/j.carbon.2013.12.050
50
H Pan, B Yu, W Wang, Y Pan, L Song, Y Hu. Comparative study of layer by layer assembled multilayer films based on graphene oxide and reduced graphene oxide on flexible polyurethane foam: flame retardant and smoke suppression properties. RSC Advances, 2016, 6(115): 114304–114312 https://doi.org/10.1039/C6RA15522G
J D Jovanovic, M N Govedarica, P R Dvornic, I G Popovic. The thermogravimetric analysis of some polysiloxanes. Polymer Degradation & Stability, 1998, 61(1): 87–93 https://doi.org/10.1016/S0141-3910(97)00135-3
53
X Wang, W Dou. Preparation of graphite oxide (GO) and the thermal stability of silicone rubber/GO nanocomposites. Thermochimica Acta, 2012, 529: 25–28 https://doi.org/10.1016/j.tca.2011.11.016
54
W Ma, J Li, X Zhao. Improving the thermal and mechanical properties of silicone polymer by incorporating functionalized graphene oxide. Journal of Materials Science, 2013, 48(15): 5287–5294 https://doi.org/10.1007/s10853-013-7320-y
Y Deng, D Qi, C Deng, X Zhang, D Zhao. Superparamagnetic high-magnetization microspheres with an Fe3O4@SiO2 core and perpendicularly aligned mesoporous SiO2 shell for removal of microcystins. Journal of the American Chemical Society, 2008, 130(1): 28–29 https://doi.org/10.1021/ja0777584
57
L X Gong, Y B Pei, Q Y Han, L Zhao, L B Wu, J X Jiang, L C Tang. Polymer grafted reduced graphene oxide sheets for improving stress transfer in polymer composites. Composites Science and Technology, 2016, 134: 144–152 https://doi.org/10.1016/j.compscitech.2016.08.014
58
Y Shi, L J Li. Chemically modified graphene: flame retardant or fuel for combustion? Journal of Materials Chemistry, 2011, 21(10): 3277–3279 https://doi.org/10.1039/C0JM02953J
59
A L Higginbotham, J R Lomeda, A B Morgan, J M Tour. Graphite oxide flame-retardant polymer nanocomposites. ACS Applied Materials & Interfaces, 2009, 1(10): 2256–2261 https://doi.org/10.1021/am900419m
