Efficient base-free oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over copper-doped manganese oxide nanorods with tert-butanol as solvent

doi:10.1007/s11705-020-1999-5

Frontiers of Chemical Science and Engineering

2021, Vol. 15

Issue (4): 960-968 https://doi.org/10.1007/s11705-020-1999-5

本期目录

Efficient base-free oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over copper-doped manganese oxide nanorods with tert-butanol as solvent

Feng Cheng, Dongwen Guo, Jinhua Lai, Meihui Long, Wenguang Zhao, Xianxiang Liu(

), Dulin Yin

National & Local Joint Engineering Laboratory for New Petro-chemical Materials and Fine Utilization of Resources, Key Laboratory of the Assembly and Application of Organic Functional Molecules of Hunan Province, College of Chemistry and Chemical Engineering, Hunan Normal University, Changsha 410081, China

全文: PDF(1612 KB) HTML

Abstract：

2,5-Furandicarboxylic acid (FDCA) is an important and renewable building block and can serve as an alternative to terephthalic acid in the production of bio-based degradable plastic. In this study, Cu-doped MnO₂ nanorods were prepared by a facile hydrothermal redox method and employed as catalysts for the selective oxidation of 5-hydroxymethylfurfural (HMF) to FDCA using tert-butyl hydroperoxide (TBHP) as an oxidant. The catalysts were characterized using X-ray diffraction analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. The effects of oxidants, solvents, and reaction conditions on the oxidation of HMF were investigated, and a reaction mechanism was proposed. Experimental results demonstrated that 99.4% conversion of HMF and 96.3% selectivity of FDCA were obtained under suitable conditions, and tert-butanol was the most suitable solvent when TBHP was used as an oxidant. More importantly, the Cu-doped MnO₂ catalyst can maintain durable catalytic activity after being recycled for more than ten times.

Key words： 5-hydroxymethylfurfural 2,5-furandicarboxylic acid selective oxidation Cu-doped MnO₂ biomass transformation

收稿日期: 2020-04-10 出版日期: 2021-06-04

Corresponding Author(s): Xianxiang Liu

引用本文:

. [J]. Frontiers of Chemical Science and Engineering, 2021, 15(4): 960-968.
Feng Cheng, Dongwen Guo, Jinhua Lai, Meihui Long, Wenguang Zhao, Xianxiang Liu, Dulin Yin. Efficient base-free oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over copper-doped manganese oxide nanorods with tert-butanol as solvent. Front. Chem. Sci. Eng., 2021, 15(4): 960-968.

链接本文:

https://academic.hep.com.cn/fcse/CN/10.1007/s11705-020-1999-5
https://academic.hep.com.cn/fcse/CN/Y2021/V15/I4/960

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Tab.1

Tab.2

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

1	H L Wang, B Yang, Q Zhang, W B Zhu. Catalytic routes for the conversion of lignocellulosic biomass to aviation fuel range hydrocarbons. Renewable & Sustainable Energy Reviews, 2020, 120: 109612
2	S H Zhu, J G Wang, W B Fan. Graphene-based catalysis for biomass conversion. Catalysis Science & Technology, 2015, 5: 3845–3858
3	Y Z Wang, S De, N Yan. Rational control of nano-scale metal-catalysts for biomass conversion. Chemical Communications, 2016, 52: 6210–6224
4	H Abou-Yousef, E B Hassan. A novel approach to enhance the activity of H-form zeolite catalyst for production of hydroxymethylfurfural from cellulose. Journal of Industrial and Engineering Chemistry, 2014, 20: 1952–1957
5	X X Liu, H Ding, Q Xu, W Z Zhong, D L Yin, S P Su. Selective oxidation of biomass derived 5-hydroxymethylfurfural to 2,5-diformylfuran using sodium nitrite. Journal of Energy Chemistry, 2016, 25: 117–121
6	X X Liu, J F Xiao, H Ding, W Z Zhong, Q Xu, S P Su, D L Yin. Catalytic aerobic oxidation of 5-hydroxymethylfurfural over VO2+ and Cu2+ immobilized on amino functionalized SBA-15. Chemical Engineering Journal, 2016, 283: 1315–1321
7	B S Wu, Y T Xu, Z Y Bu, L B Wu, B G Li, P Dubois. Biobased poly(butylene 2,5-furandicarboxylate)and poly(butylene adipate-co-butylene 2,5-furandicarboxylate)s: from synthesis using highly purified 2,5-furandicarboxylic acid to thermo-mechanical properties. Polymer, 2014, 55: 3648–3655
8	J H Zhu, J L Cai, W C Xie, P H Chen, M Gazzano, M Scandola, R A Gross. Poly(butylene 2,5-furan dicarboxylate), a biobased alternative to PBT: synthesis, physical properties, and crystal structure. Macromolecules, 2013, 46: 796–804
9	B Liu, Y S Ren, Z H Zhang. Aerobic oxidation of 5-hydroxymethylfurfural into 2,5-furandicarboxylic acid in water under mild conditions. Green Chemistry, 2015, 17: 1610–1617
10	Y Y Zhu, F S Wang, M Y Fan, Q Zhu, Z P Dong. Ultrafine Pd nanoparticles immobilized on N-doped hollow carbon nanospheres with superior catalytic performance for the selective oxidation of 5-hydroxymethylfurfural and hydrogenation of nitroarenes. Journal of Colloid and Interface Science, 2019, 553: 588–597
11	Q Q Li, H Y Wang, Z P Tian, Y J Weng, C G Wang, J R Ma, C F Zhu, W Z Li, Q Y Liu, L L Ma. Selective oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over Au/CeO2 catalysts: the morphology effect of CeO2. Catalysis Science & Technology, 2019, 9: 1570–1580
12	C Megías-Sayago, A Lolli, S Ivanova, S Albonetti, F Cavani, J A Odriozola. Au/Al2O3—efficient catalyst for 5-hydroxymethylfurfural oxidation to 2,5-furandicarboxylic acid. Catalysis Tadoy, 2019, 333: 169–175
13	H Liu, X J Cao, T Wang, J N Wei, X Tang, X H Zeng, Y Sun, T Z Lei, S J Liu, L Lin. Efficient synthesis of bio-monomer 2,5-furandicarboxylic acid from concentrated 5-hydroxymethylfurfural or fructose in DMSO/H2O mixed solvent. Journal of Industrial and Engineering Chemistry, 2019, 77: 209–214
14	X H Zhou, K H Song, Z H Li, W M Kang, H R Ren, K M Su, M L Zhang, B W Cheng. The excellent catalyst support of Al2O3 fibers with needle-like mullite structure and HMF oxidation into FDCA over CuO/Al2O3 fibers. Ceramics International, 2019, 45: 2330–2337
15	E Hayashi, Y Yamaguchi, K Kamata, N Tsunoda, Y Kumagai, F Oba, M Hara. Effect of MnO2 crystal structure on aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid. Journal of the American Chemical Society, 2019, 141: 890–900
16	H Zhou, H H Xu, Y Liu. Aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over Co/Mn-lignin coordination complexes-derived catalysts. Applied Catalysis B: Environmental, 2019, 244: 965–973
17	A B Gawade, A V Nakhate, G D Yadav. Selective synthesis of 2,5-furandicarboxylic acid by oxidation of 5-hydroxymethylfurfural over MnFe2O4 catalyst. Catalysis Tadoy, 2018, 309: 119–125
18	T Gao, M Glerup, F Krumeich, R Nesper, H Fjellvag, P Norby. Microstructures and spectroscopic properties of cryptomelane-type manganese dioxide nanofibers. Journal of Physical Chemistry C, 2008, 112: 13134–13140
19	W Gac. The influence of silver on the structural, redox and catalytic properties of the cryptomelane-type manganese oxides in the low-temperature CO oxidation reaction. Applied Catalysis B: Environmental, 2007, 75: 107–117
20	E Hayashi, T Komanoya, K Kamata, M Hara. Heterogeneously-catalyzed aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with manganese dioxide. ChemSusChem, 2017, 10(4): 815–815
21	Y S Ding, X F Shen, S Sithambaram, S Gomez, R Kumar, V M B Crisostomo, S L Suib, M Aindow. Synthesis and catalytic activity of cryptomelane-type Manganese dioxide nanomaterials produced by a novel solvent-free method. Chemistry of Materials, 2005, 17: 5382–5389
22	F Yang, Y Ding, J J Tang, S J Zhou, B B Wang, Y Kong. Oriented surface decoration of (Co-Mn) bimetal oxides on nanospherical porous silica and synergetic effect in biomass-derived 5-hydroxymethylfurfural oxidation. Molecular Catalysis, 2017, 435: 144–155
23	Y S Duh, H Y Kuo, C S Kao. Characterization on thermal decompositions of tert-butylhydroperoxide (TBHP) by confinement test. Journal of Thermal Analysis and Calorimetry, 2016, 127(1): 1047–1059

Viewed

Full text

Abstract

Cited

Shared

Discussed