1. Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology (SIMIT), Shanghai 200050, China 2. Xi’an Longi Silicon Materials Corp., Xi’an 710100, China
n-type CZ-Si wafers featuring longer minority carrier lifetime and higher tolerance of certain metal contamination can offer one of the best Si-based solar cells. In this study, Si heterojuction (SHJ) solar cells which was fabricated with different wafers in the top, middle and tail positions of the ingot, exhibited a stable high efficiency of>22% in spite of the various profiles of the resistivity and lifetime, which demonstrated the high material utilization of n-type ingot. In addition, for effectively converting the sunlight into electrical power, the pyramid size, pyramid density and roughness of surface of the Cz-Si wafer were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM). Furthermore, the dependence of SHJ solar cell open-circuit voltage on the surface topography was discussed, which indicated that the uniformity of surface pyramid helps to improve the open-circuit voltage and conversion efficiency. Moreover, the simulation revealed that the highest efficiency of the SHJ solar cell could be achieved by the wafer with a thickness of 100 µm. Fortunately, over 23% of the conversion efficiency of the SHJ solar cell with a wafer thickness of 100 µm was obtained based on the systematic optimization of cell fabrication process in the pilot production line. Evidently, the large availability of both n-type ingot and thinner wafer strongly supported the lower cost fabrication of high efficiency SHJ solar cell.
Masuko K, Shigematsu M, Hashiguchi T, Fujishima D, Kai M, Yoshimura N, Yamaguchi T, Ichihashi Y, Mishima T, Matsubara N, Yamanishi T, Takahama T, Taguchi M, Maruyama E, Okamoto S. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell. IEEE Journal of Photovoltaics, 2014, 4(6): 1433–1435
2
Adachi D, Hernandez J L, Yamamoto K. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency. Applied Physics Letters, 2015, 107(23):233506
3
Green M A, Emery K, Hishikawa Y, Warta W, Dunlop E D. Solar cell efficiency tables (version 48). Progress in Photovoltaics: Research and Applications, 2016, 24: 905–913
4
Glunz S. Crystalline silicon photovoltaics from the past to the future. In: The 25th International Photovoltaic Science and Engineering Conference. Busan, Korea, 2015
5
Sheng J, Wang W, Yuan S, Cai W, Sheng Y, Chen Y, Ding J, Yuan N, Feng Z, Verlinden P J. Development of a large area n-type PERT cell with high efficiency of 22% using industrially feasible technology. Solar Energy Materials and Solar Cells, 2016, 152: 59–64
6
Meng F, Shi J, Liu Z, Cui Y, Lu Z, Feng Z. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells. Solar Energy Materials and Solar Cells, 2014, 122(3): 70–74
7
Liu W, Meng F, Zhang X, Liu Z. Evolution of a native oxide layer at the a-Si:H/c-Si interface and its influence on a silicon heterojunction solar cell. Applied Materials and Interfaces, 2015, 51(3): 748–751
8
Seif J P, Krishnamani G, Demaurex B, Ballif C, Wolf S D. Amorphous/crystalline silicon interface passivation: ambient-temperature dependence and implications for solar cell performance. IEEE Journal of Photovoltaics, 2015, 5(3): 718–724
9
Mews M, Schulze T F, Mingirulli N, Korte L. Hydrogen plasma treatments for passivation of amorphous-crystalline silicon-heterojuncitons on surfaces promoting epitaxy. Applied Physics Letters, 2013, 102(12): 122106
10
Geissbühler J, De Wolf S, Demaurex B, Seif J P, Alexander D T L, Barraud L, Ballif C. Amorphous/crystalline silicon interface defects induced by hydrogen plasma treatments. Applied Physics Letters, 2013, 102(23): 231604
11
Lee S J, Kim S H, Kim D W, Kim K H, Kim B K, Jang J. Effect of hydrogen plasma passivation on performance of HIT solar cells. Solar Energy Materials and Solar Cells, 2011, 95(1): 81–83
12
Zhang L, Liu W, Guo W, Bao J, Zhang X, Liu J, Wang D, Meng F, Liu Z. Interface processing of amorphous-crystallinesilicon heterojunction prior to the formation of amorphous-to-nanocrystalline transition phase. IEEE Journal of Photovoltaics, 2016, 6(3): 604–610
13
Edwards M, Bowden S, Das U, Burrows M. Effect of texturing and surface preparation on lifetime and cell performance in heterojunction silicon solar cells. Solar Energy Materials and Solar Cells, 2008, 92(11): 1373–1377
14
Fesquet L, Olibet S, Damon-Lacoste J, De WolfS, Hessler-wyser A, Monachorr C, Ballif C. Modification of textured silicon wafer surface morphology for fabrication of heterojunction solar cell with open circuit voltage over 700 mV. In: 34th IEEE Photovoltaic Specialists Conference. Philadelphia, USA, 2009
15
Shen L, Meng F, Liu Z. Roles of the Fermi level of doped a-Si:H and band offsets at a-Si:H/c-Si interfaces in n-type HIT solar cells. Solar Energy, 2013, 97(5): 168–175
16
Mishima T, Taguchi M, Sakata H, Maruyama E. Development status of high-efficiency HIT solar cells. Solar Energy Materials and Solar Cells, 2011, 95(1): 18–21
