1. Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Beijing 100190, China; University of Chinese Academy of Sciences, Beijing 100190, China 2. Chinese Academy of Sciences Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Beijing 100190, China 3. Chinese Academy of Sciences State Key Laboratory of Technologies in Space Cryogenic Propellants, Technical Institute of Physics and Chemistry, Beijing 100190, China
Liquid hydrogen (LH2) attracts widespread attention because of its highest energy storage density. However, evaporation loss is a serious problem in LH2 storage due to the low boiling point (20 K). Efficient insulation technology is an important issue in the study of LH2 storage. Hollow glass microspheres (HGMs) is a potential promising thermal insulation material because of its low apparent thermal conductivity, fast installation (Compared with multi-layer insulation, it can be injected in a short time.), and easy maintenance. A novel cryogenic insulation system consisting of HGMs and a self-evaporating vapor-cooled shield (VCS) is proposed for storage of LH2. A thermodynamic model has been established to analyze the coupled heat transfer characteristics of HGMs and VCS in the composite insulation system. The results show that the combination of HGMs and VCS can effectively reduce heat flux into the LH2 tank. With the increase of VCS number from 1 to 3, the minimum heat flux through HGMs decreases by 57.36%, 65.29%, and 68.21%, respectively. Another significant advantage of HGMs is that their thermal insulation properties are not sensitive to ambient vacuum change. When ambient vacuum rises from 10−3 Pa to 1 Pa, the heat flux into the LH2 tank increases by approximately 20%. When the vacuum rises from 10−3 Pa to 100 Pa, the combination of VCS and HGMs reduces the heat flux into the tank by 58.08%–69.84% compared with pure HGMs.
X H Yan, X Zhang, C H Gu, F Li. Power to gas: addressing renewable curtailment by converting to hydrogen. Frontiers in Energy, 2018, 12(4): 560–568 https://doi.org/10.1007/s11708-018-0588-5
2
A Khosravi, R N N Koury, L Machado, J J G Pabon. Energy, exergy and economic analysis of a hybrid renewable energy with hydrogen storage system. Energy, 2018, 148: 1087–1102 https://doi.org/10.1016/j.energy.2018.02.008
3
A Mostafaeipour, M Qolipour, H Goudarzi. Feasibility of using wind turbines for renewable hydrogen production in Firuzkuh, Iran. Frontiers in Energy, 2018: 1–12 https://doi.org/10.1007/s11708-018-0588-5
4
V L Pachapur, S J Sarma, S K Brar, Y L Bihan, G Buelna, M Verma . Energy balance of hydrogen production from wastes of biodiesel production. Biofuels, 2018, 9(2): 129–138 https://doi.org/10.1080/17597269.2016.1153361
5
X P Chen, W F Shangguan. Hydrogen production from water splitting on CdS-based photocatalysts using solar light. Frontiers in Energy, 2013, 7(1): 111–118 https://doi.org/10.1007/s11708-012-0228-4
A M Abdalla, S Hossain, P M Petra, M Ghasemi, A K. AzadAchievements and trends of solid oxide fuel cells in clean energy field: a perspective review. Frontiers in Energy, 2018: 1–24 https://doi.org/10.1007/s11708-018-0546-2
8
L J Hastings, A Hedayat, T M Brown. Analytical modeling and test correlation of variable density multilayer insulation for cryogenic storage. Technical Report, NASA/TM-2004-213175, 2004
9
J J Martin, L Hastings. Large-scale liquid hydrogen testing of variable density multilayer insulation with a foam substrate. Technical Report, NASA/TM-2001–211089, 2001
10
C J Tseng, M Yamaguchi, T Ohmori. Thermal conductivity of polyurethane foams from room temperature to 20 K. Cryogenics, 1997, 37(6): 305–312 https://doi.org/10.1016/S0011-2275(97)00023-4
11
Z Liu, Y Z Li, F S Xie, K Zhou. Thermal performance of foam/MLI for cryogenic liquid hydrogen tank during the ascent and on orbit period. Applied Thermal Engineering, 2016, 98(5): 430–439 https://doi.org/10.1016/j.applthermaleng.2015.12.084
12
Q Wang, J Chen, B Q Gui, T Zhai, D Yang. Fabrication and properties of thermal insulating material using hollow glass microspheres bonded by aluminum-chrome-phosphate and tetraethyl orthosilicate. Ceramics International, 2016, 42(4): 4886–4892 https://doi.org/10.1016/j.ceramint.2015.12.003
J S Zhang, T S Fisher, P V Ramachandran, J P Gore, I Mudawar. A review of heat transfer issues in hydrogen storage technologies. Journal of Heat Transfer, 2005, 127(12): 1391–1399 https://doi.org/10.1115/1.2098875
15
F Wang, J S Liang, Q G Tang, N Wang, L W Li. Preparation and properties of thermal insulation latex paint for exterior wall based on defibred sepiolite and hollow glass microspheres. Advanced Materials Research, 2009, 58: 103–108 https://doi.org/10.4028/www.scientific.net/AMR.58.103
16
C D Li, B H Li, N Pan, Z Chen, M U Saeed, T Xu, Y Yang. Thermo-physical properties of polyester fiber reinforced fumed silica/hollow glass microsphere composite core and resulted vacuum insulation panel. Energy and Building, 2016, 125: 298–309 https://doi.org/10.1016/j.enbuild.2016.05.013
17
K Q Yan, P Wang, J J Zhang. Progress in the cryogenic insulation of hollow glass microspheres. Vacuum and Cryogenics, 2016, 22(2): 63–69
18
J P Sass, W W S Cyr, T M Barrett, R G Baumgartner, J W Lott, J E Fesmire, J G Weisend. Glass bubbles insulation for liquid hydrogen storage tanks. AIP Conference Proceedings, 2010, 1218: 772–779 https://doi.org/10.1063/1.3422430
19
P Wang, B Liao, Z G An, K Yan, J Zhang. Measurement and calculation of cryogenic thermal conductivity of HGMs. International Journal of Heat and Mass Transfer, 2019, 129: 591–598 https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.113
20
M S Allen, R G Baumgartner, J E Fesmire, S D. AugustynowiczAdvances in microsphere insulation systems. AIP Conference Proceedings, 2004, 710: 619–626 https://doi.org/10.1063/1.1774735
21
J Yuan, Z An, B Li, J Zhang. Facile aqueous synthesis and thermal insulating properties of low-density glass/TiO2 core/shell composite hollow spheres. Particuology, 2012, 10(4): 475–479 https://doi.org/10.1016/j.partic.2011.08.005
22
J P Zheng, L B Chen, J Wang, Y Zhou, J Wang. Thermodynamic modelling and optimization of self-evaporation vapor cooled shield for liquid hydrogen storage tank. Energy Conversion and Management, 2019, 184: 74–82 https://doi.org/10.1016/j.enconman.2018.12.053
23
W B Jiang, Z Q Zuo, Y H Huang, B Wang, P J Sun, P Li. Coupling optimization of composite insulation and vapor-cooled shield for on-orbit cryogenic storage tank. Cryogenics, 2018, 96: 90–98 https://doi.org/10.1016/j.cryogenics.2018.10.008
24
R E Skochdopole. The thermal conductivity of foamed plastics. Chemical Engineering Progress, 1961, 57(10): 55–59
25
P Wang. Research and application of vacuum thermal insulation performance of hollow glass microspheres. Dissertation for the Doctoral Degree. Beijing: University of Chinese Academy of Sciences, 2018 (in Chinese)
26
K C Yung, B L Zhu, T M Yue, C Xie. Preparation and properties of hollow glass microsphere-filled epoxy-matrix composites. Composites Science and Technology, 2009, 69(2): 260–264 https://doi.org/10.1016/j.compscitech.2008.10.014
27
J E Fesmire, S D Augustynowicz. Thermal performance testing of glass microspheres under cryogenic vacuum conditions. AIP Conference Proceedings, 2004, 710(1): 612–618 https://doi.org/10.1063/1.1774734
28
G R Cunnington, C L Tien. Apparent thermal conductivity of uncoated microsphere cryogenic insulation. Advances in Cryogenic Engineering, 1977, 22: 263–271 https://doi.org/10.1007/978-1-4613-9850-9_28
29
Q Zhu, H Lee, Z M Zhang. Radiative properties of materials with surface scattering or volume scattering: a review. Frontiers of Energy and Power Engineering in China, 2009, 3(1): 60–79 https://doi.org/10.1007/s11708-009-0011-3
30
L Schlapbach, A Züttel. Hydrogen-storage materials for mobile applications. Nature, 2001, 414(6861): 353–358 https://doi.org/10.1038/35104634
31
J P Zheng, L B Chen, J Wang, X Xi, H Zhu, Y Zhou, J Wang. Thermodynamic analysis and comparison of four insulation schemes for liquid hydrogen storage tank. Energy Conversion and Management, 2019, 186: 526–534 https://doi.org/10.1016/j.enconman.2019.02.073
32
J L Yang, J B Tang. Influence of envelope insulation materials on building energy consumption. Frontiers in Energy, 2017, 11(4): 575–581 https://doi.org/10.1007/s11708-017-0473-7
33
C L Lim, N M Adam, K A Ahmad. Cryogenic pipe flow simulation for liquid nitrogen with vacuum insulated pipe (VIP) and Polyurethane (PU) foam insulation under steady-state conditions. Thermal Science and Engineering Progress, 2018, 7: 302–310 https://doi.org/10.1016/j.tsep.2018.07.009
34
J P Zheng, L B Chen, C Cui, J Guo, W Zhu, Y Zhou, J Wang. Experimental study on composite insulation system of spray on foam insulation and variable density multilayer insulation. Applied Thermal Engineering, 2018, 130: 161–168 https://doi.org/10.1016/j.applthermaleng.2017.11.050