Please wait a minute...
Frontiers of Information Technology & Electronic Engineering

ISSN 2095-9184

Frontiers of Information Technology & Electronic Engineering  2015, Vol. 16 Issue (3): 249-258   https://doi.org/10.1631/FITEE.1400185
  本期目录
Analysis and design of pulse frequency modulation dielectric barrier discharge for low power applications
Tang-tang GUO(),Xing-liang LIU,Shi-qiang HAO,Chi ZHANG,Xiang-ning HE()
School of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(696 KB)  
Abstract

For low power dielectric barrier discharge (DBD) used in small-size material treatment or portable devices, highstep transformer parasitic capacitance greatly influences the performance of the resonant converter as it is of the same order of magnitude as the equivalent capacitance of DBD load. In this paper, steady-state analysis of the low power DBD is presented, considering the inevitable parasitic capacitance of the high-step transformer. The rectifier-compensated first harmonic approximation (RCFHA) is applied to linearize the equivalent load circuit of DBD at low frequency and the derived expressions are accurate and convenient for the analysis and design of the power supply. Based on the proposed linear equivalent load circuit, the influence of transformer parasitic capacitance on the key parameters, including the frequency range and the applied electrode voltage, is discussed when the power is regulated with pulse frequency modulation (PFM). Also, a design procedure is presented based on the derived expressions. A prototype is constructed according to the design results and the accuracy of the design is verified by experimental results.

Key wordsDielectric barrier discharge    Rectifier-compensated first harmonic approximation    Parasitic capacitance    Power converter design
收稿日期: 2014-05-16      出版日期: 2015-03-12
Corresponding Author(s): Xiang-ning HE   
 引用本文:   
. [J]. Frontiers of Information Technology & Electronic Engineering, 2015, 16(3): 249-258.
Tang-tang GUO,Xing-liang LIU,Shi-qiang HAO,Chi ZHANG,Xiang-ning HE. Analysis and design of pulse frequency modulation dielectric barrier discharge for low power applications. Front.Inform.Technol.Electron.Eng, 2015, 16(3): 249-258.
 链接本文:  
https://academic.hep.com.cn/fitee/CN/10.1631/FITEE.1400185
https://academic.hep.com.cn/fitee/CN/Y2015/V16/I3/249
1 Alonso, J.M., Valdés, M., Calleja, A.J., , 2003. High frequency testing and modeling of silent discharge ozone generators. Ozone Sci. Eng., 25(5): 363-376. []
https://doi.org/10.1080/01919510390481685
2 Bonaldo, J.P., Pomilio, J.A., 2010. Control strategies for high frequency voltage source converter for ozone generation. Proc. IEEE Int. Symp. on Industrial Electronics, p.754-760. []
https://doi.org/10.1109/ISIE.2010.5637402
3 Burany, N., Huber, L., Pejovic, P., 2008. Corona discharge surface treater without high voltage transformer. IEEE Trans. Power Electron., 23(2): 993-1002. []
https://doi.org/10.1109/TPEL.2007.915760
4 Doebbelin, R., Benecke, M., Lindemann, A., 2008. Calculation of leakage inductance of core-type transformers for power electronic circuits. Proc. 13th Power Electronics and Motion Control Conf., p.1280-1286. []
https://doi.org/10.1109/EPEPEMC.2008.4635445
5 Fang, Z., Qiu, X., Qiu, Y., , 2006. Dielectric barrier discharge in atmospheric air for glass-surface treatment to enhance hydrophobicity. IEEE Trans. Plasma Sci., 34(4): 1216-1222. []
https://doi.org/10.1109/TPS.2006.877619
6 Fu, D., Lee, F.C., Qiu, Y., , 2008. A novel high-powerdensity three-level LCC resonant converter with constant-power-factor-control for charging applications. IEEE Trans. Power Electron., 23(5): 2411-2420. []
https://doi.org/10.1109/TPEL.2008.2002052
7 Gibalov, V.I., Pietsch, G.J., 2000. The development of dielectric barrier discharges in gas gaps and on surfaces. J. Phys. D Appl. Phys., 33(20): 2618-2636. []
https://doi.org/10.1088/0022-3727/33/20/315
8 Gilbert, A.J., Bingham, C.M., Stone, D.A., , 2007. Normalized analysis and design of LCC resonant converters. IEEE Trans. Power Electron., 22(6): 2386-2402. []
https://doi.org/10.1109/TPEL.2007.909243
9 Gilbert, A.J., Bingham, C.M., Stone, D.A., , 2008. Selfoscillating control methods for the LCC current-output resonant converter. IEEE Trans. Power Electron., 23(4): 1973-1986. []
https://doi.org/10.1109/TPEL.2008.925198
10 Jidenko, N., Petit, M., Borra, J.P., 2006. Electrical characterization of microdischarges produced by dielectric barrier discharge in dry air at atmospheric pressure. J. Phys. D Appl. Phys., 39(2): 281-293. []
https://doi.org/10.1088/0022-3727/39/2/008
11 Kinnares, V., Hothongkham, P., 2010. Circuit analysis and modeling of a phase-shifted pulsewidth modulation fullbridge-inverter-fed ozone generator with constant applied electrode voltage. IEEE Trans. Power Electron., 25(7): 1739-1752. []
https://doi.org/10.1109/TPEL.2010.2042075
12 Kostov, K.G., Nishime, T.M.C., Hein, L.R.O., , 2013. Study of polypropylene surface modification by air dielectric barrier discharge operated at two different frequencies. Surf. Coat. Technol., 234: 60-66. []
https://doi.org/10.1016/j.surfcoat.2012.09.041
13 Liu, Y., He, X., 2005. PDM and PFM hybrid control of a series-resonant inverter for corona surface treatment. IEE Proc.-Electr. Power Appl., 152(6): 1445-1450. []
https://doi.org/10.1049/ip-epa:20045270
14 Martin-Ramos, J.A., Pernia, A.M., Diaz, J., , 2008. Power supply for a high-voltage application. IEEE Trans. Power Electron., 23(4): 1608-1619. []
https://doi.org/10.1109/TPEL.2008.925153
15 Shafiei, N., Pahlevaninezhad, M., Farzanehfard, H., , 2011. Analysis and implementation of a fixed-frequency LCLC resonant converter with capacitive output filter. IEEE Trans. Ind. Electron., 58(10): 4773-4782. []
https://doi.org/10.1109/TIE.2011.2116758
16 Shafiei, N., Pahlevaninezhad, M., Farzanehfard, H., , 2013. Analysis of a fifth-order resonant converter for high-voltage DC power supplies. IEEE Trans. Power Electron., 28(1): 85-100. []
https://doi.org/10.1109/TPEL.2012.2200301
17 Wagner, H.E., Brandenburg, R., Kozlov, K.V., , 2003. The barrier discharge: basic properties and applications to surface treatment. Vacuum, 71(3): 417-436. []
https://doi.org/10.1016/S0042-207X(02)00765-0
18 Wang, C., He, X., 2006. Preparation of hydrophobic coating on glass surface by dielectric barrier discharge using a 16 kHz power supply. Appl. Surf. Sci., 252(23): 8348-8351. []
https://doi.org/10.1016/j.apsusc.2005.11.042
19 Wang, H., Fang, Z., Qiu, Y., , 2005. On the changing of equivalent capacitance in dielectric barrier discharge. Insul. Mater., 38(1): 37-40. [] (in Chinese)
https://doi.org/10.3969/j.issn.1009-9239.2005.01.012
20 Wedaa, H., Abdel-Salam, M., Ahmed, A., , 2011. NO removal using dielectric barrier discharges in a multirod reactor stressed by AC and pulsed high voltages. IEEE Trans. Dielectr. Electr. Insul., 18(5): 1743-1751. []
https://doi.org/10.1109/TDEI.2011.6032846
21 Williamson, J.M., Trump, D.D., Bletzinger, P., , 2006. Comparison of high-voltage ac and pulsed operation of a surface dielectric barrier discharge. J. Phys. D Appl. Phys., 39(20): 4400-4406. []
https://doi.org/10.1088/0022-3727/39/20/016
22 Youssef, M.Z., Jain, P.K., 2007. Series-parallel resonant converter in self-sustained oscillation mode with the highfrequency transformer-leakage-inductance effect: analysis, modeling, and design. IEEE Trans. Ind. Electron., 54(3): 1329-1341. []
https://doi.org/10.1109/TIE.2007.892742
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed