Review on electromagnetic welding of dissimilar materials

doi:10.1007/s11465-016-0375-0

Frontiers of Mechanical Engineering

2016, Vol. 11

Issue (4): 363-373 https://doi.org/10.1007/s11465-016-0375-0

本期目录

Review on electromagnetic welding of dissimilar materials

K. SHANTHALA(

),T. N. SREENIVASA

Mechanical Department, AMC Engineering College, Bangalore, India

全文: PDF(507 KB) HTML

Abstract：

Electromagnetic welding (EMW) is a high-speed joining technique that is used to join similar or dissimilar metals, as well as metals to non-metals. This technique uses electromagnetic force to mainly join conductive materials. Unlike conventional joining processes, the weld interface does not melt, thus keeping the material properties intact. Extremely high velocity and strain rate involved in the process facilitate extending the EMW technique for joining several materials. In this paper, the research and progress in electromagnetic welding are reviewed from various perspectives to provide a basis for further research.

Key words： electromagnetic welding impact dissimilar materials

收稿日期: 2015-09-05 出版日期: 2016-11-29

Corresponding Author(s): K. SHANTHALA

引用本文:

. [J]. Frontiers of Mechanical Engineering, 2016, 11(4): 363-373.
K. SHANTHALA,T. N. SREENIVASA. Review on electromagnetic welding of dissimilar materials. Front. Mech. Eng., 2016, 11(4): 363-373.

链接本文:

https://academic.hep.com.cn/fme/CN/10.1007/s11465-016-0375-0
https://academic.hep.com.cn/fme/CN/Y2016/V11/I4/363

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

1	Chen S, Jiang X. Microstructure evolution during magnetic pulse welding of dissimilar aluminium and magnesium alloys. Journal of Manufacturing Processes, 2015, 19: 14–21 https://doi.org/10.1016/j.jmapro.2015.04.001
2	Schäfer R, Pasquale P. The electromagnetic pulse technology(EMPT): Forming, welding, crimping and cutting. Biuletyn Instytutu Spawalnictwa, 2014, 58(2): 50–57
3	Kore S D, Date P P, Kulkarni S V. Effect of process parameters on electromagneticimpact welding of aluminum sheets. InternationalJournal of Impact Engineering, 2007, 34(8): 1327–1341 https://doi.org/10.1016/j.ijimpeng.2006.08.006
4	Faes K. Electronic pulsetube welding. 2011.
5	Aizawa T, Kashani M. Experimental and numerical studyon magnetic pulse welding to improving the life time of one-turn flat coil. IOP Conference Series: MaterialsScience and Engineering, 2014, 61(1): 012028 https://doi.org/10.1088/1757-899X/61/1/012028
6	Raoelison R N, Racine D, Zhang Z, . Magnetic pulse welding: Interfaceof Al/Cu joint and investigation of intermetallic formation effecton the weld features. Journal of ManufacturingProcesses, 2014, 16(4): 427–434 https://doi.org/10.1016/j.jmapro.2014.05.002
7	Raoelison R N, Buiron N, Rachik M, . Efficient welding conditions inmagnetic pulse welding process. Journalof Manufacturing Processes, 2012, 14(3): 372–377 https://doi.org/10.1016/j.jmapro.2012.04.001
8	Aizawa T, Okagawa K, Kashani M. Application of magnetic pulse welding techniquefor flexible printed circuit boards (FPCB) lap joints. Journal of Materials Processing Technology, 2013, 213(7): 1095–1102 https://doi.org/10.1016/j.jmatprotec.2012.12.004
9	Watanabe M, Kumai S, Hagimoto G, Interfacial microstructure of aluminum/metallicglass lap joints fabricated by magnetic pulse welding. Materials Transactions, 2009, 50(6): 1279–1285 https://doi.org/10.2320/matertrans.ME200835
10	Shribman V. Magnetic pulse welding for dissimilar and similar material. In: Proceedings of 3rd International Conference on High Speed Forming.Dortmund, 2008, 13–22
11	Kore S D, Dhanesh P, Kulkarni S V, . Numerical modeling of electromagnetic welding. International Journal for Applied Electromagneticsand Mechanics, 2010, 32(1): 1–19 https://doi.org/10.3233/JAE-2010-1062
12	Xu Z, Cui J, Yu H, . Research on the impact velocity of magnetic impulse welding of pipe fitting. Materials & Design, 2013, 49: 736–745 https://doi.org/10.1016/j.matdes.2012.12.059
13	Zhang Y, Babu S S, Prothe C, Application of high velocity impact welding at varied different length scales. Journal of Materials Processing Technology, 2011, 211(5): 944–952 https://doi.org/10.1016/j.jmatprotec.2010.01.001
14	Kore S D, Date P P, Kulkarni S V. Electromagnetic impact welding of aluminumto stainless steel sheets. Journal of MaterialsProcessing Technology, 2008, 208(1–3): 486–493 https://doi.org/10.1016/j.jmatprotec.2008.01.039
15	Kore S D, Imbert J, Worswick M J, . Electromagnetic impact weldingof Mg to Al sheets. Science and Technologyof Welding and Joining, 2009, 14(6): 549–553
16	Faes K, Baaten T, De Waele W, . Joining of copper to brass using magnetic pulse welding. In: Proceedings of 4th International Conference on High Speed Forming. Columbus, 2010, 84–96 https://doi.org/10.17877/DE290R-8664
17	Watanabe M, Kumai S. Interfacial morphology of magneticpulse welded aluminum/aluminum and copper/copper lap joints. Journal of Japan Institute of Light Metals, 2009, 59(2): 140–147 (in Japanese)
18	Psyk V, Risch D, Kinsey B L, Electromagnetic forming—A review. Journal of Materials Processing Technology, 2011, 211(5): 787–829 https://doi.org/10.1016/j.jmatprotec.2010.12.012
19	Yu H, Xu Z, Fan Z,. Mechanical property and microstructureof aluminum alloy-steel tubes joint by magnetic pulse welding. Materials Science and Engineering A, 2013, 561: 259–265 https://doi.org/10.1016/j.msea.2012.11.015
20	Lee K J, Kumai S, Arai T, . Interfacial microstructure andstrength of steel/aluminum alloy lap joint fabricated by magneticpressure seam welding. Materials Science and Engineering A, 2007, 471(1–2): 95–101 https://doi.org/10.1016/j.msea.2007.04.033
21	Marya M, Marya S, Priem D. On the characteristicsof electromagnetic welds between aluminum and other metals and alloys. Welding in the World, 2005, 49 (5): 74–84
22	Göbel G, Kaspar J, Herrmannsdörfer T, Insights into intermetallicphases on pulse welded dissimilar metal joints. In: Proceedings of 4th International Conference on High Speed Forming. Columbus, 2010, 121–136
23	Kumar S, Kulkarni M R, Saroj P C, . Metallurgical and mechanical testing of electromagneticallywelded copper and iron sample. In: Proceedings of 13th Asia-Pacific Conference on NDT. Bombay, 2013
24	Ben-Artzy A, Stern A, Frage N, Wave formation mechanism in magnetic pulse welding. International Journal of Impact Engineering, 2010, 37(4): 397–404 https://doi.org/10.1016/j.ijimpeng.2009.07.008
25	Nassiri A, Chini G, Kinsey B. Spatial stabilityanalysis of emergent wavy interfacial patterns in magnetic pulsed welding. CIRP Annals-Manufacturing Technology, 2014, 63: 245–248 https://doi.org/10.1016/j.cirp.2014.03.023
26	Cui J, Sun G, Li G,. Specific wave interface and its formation duringmagnetic pulse welding. Applied PhysicsLetters, 2014, 105(22): 221901–221901-4 https://doi.org/10.1063/1.4903044
27	Uhlmann E, Prasol L, Ziefle A. Potentials of pulse magnetic forming andjoining. Advanced Materials Research, 2014, 907: 349–364 doi:10.4028/www.scientific.net/AMR.907.349
28	Lorenz A, Lueg-Althoff J., Göbel G,Influence of axial workpiecepositioning during magnetic pulse welding of aluminum-steel joints. In: Proceedings of 6th International Conference on High Speed Forming. 2014, 189–198 doi:10.17877/DE290R-15471
29	Aizawa T, Kashani M, Okagawa K. Application of magnetic pulse welding foraluminum alloys and SPCC steel sheet joints. Welding Journal, 2007, 86: 119s–124s
30	BroeckhoveJ, Len W. Experimental research on magnetic pulsewelding of dissimilar metals. Dissertationfor the Master’s Degree. Ghent: Ghent University, 2009–2010
31	Nassiri A, Campbell C, Chini G,. Analytical model and experimentalvalidation of single turn, axi-symmetric coil for electromagneticforming and welding. Procedia Manufacturing, 2015, 1: 814–827 https://doi.org/10.1016/j.promfg.2015.09.070
32	PROGRESS INDUSTRIAL SYSTEMS SA. Equipmentand technology for magnetic pulsed processing of metals.
33	AUTOMOTIVE DESIGN and PRODUCTION. Weldingmixed materials, multiple ways.
34	Gary F. Benedict, NontraditionalManufacturing Processes. Boca Raton: CRCPress, 1987, 103–123
35	Marré M, Brosius A, Tekkaya A E. Joining by compression and expansion of (none-) reinforced profiles. Advanced Materials Research, 2008, 43: 57–68
36	Rajawat R K, Desai S V, Kulkarni M R, . Electromagnetic forming—A technique with potential applications in accelerators. In: Proceedings of APAC 2014. Gyeongju, 2004, 187–189
37	ELMAG. EMF technology in the aerospace industry.
38	Kochan A. Magnetic pulse welding shows potential for automotive applications. Assembly Automation, 2000, 20(2): 129–132 https://doi.org/10.1108/01445150010321742

Viewed

Full text

Abstract

Cited

Shared

Discussed