Tailoring properties of reticulated vitreous carbon foams with tunable density

doi:10.1007/s11706-016-0338-8

Frontiers of Materials Science

2016, Vol. 10

Issue (2): 157-167 https://doi.org/10.1007/s11706-016-0338-8

本期目录

Tailoring properties of reticulated vitreous carbon foams with tunable density

Oleg SMORYGO^1,^*(

),Alexander MARUKOVICH¹,Vitali MIKUTSKI¹,Vassilis STATHOPOULOS²,Siarhei HRYHORYEU³,Vladislav SADYKOV^4,⁵

1. Powder Metallurgy Institute, National Academy of Sciences of Belarus, 41 Platonov Str., Minsk 220005, Belarus
2. Technological Educational Institute of Sterea Ellada, Psahna Evias 34400, Greece
3. Belarusian National Technical University, 65 Nezavisimosty Ave., Minsk 220013, Belarus
4. Boreskov Institute of Catalysis, Sibrian Branch of Russian Academy of Sciences, 5 Lavrentiev Ave., 630090, Novosibirsk, Russia
5. Novosibirsk State University, 2 Pirogova Str., 630009, Novosibirsk, Russia

全文: PDF(786 KB) HTML

Abstract：

Reticulated vitreous carbon (RVC) foams were manufactured by multiple replications of a polyurethane foam template structure using ethanolic solutions of phenolic resin. The aims were to create an algorithm of fine tuning the precursor foam density and ensure an open-cell reticulated porous structure in a wide density range. The precursor foams were pyrolyzed in inert atmospheres at 700°C, 1100°C and 2000°C, and RVC foams with fully open cells and tunable bulk densities within 0.09–0.42 g/cm³ were synthesized. The foams were characterized in terms of porous structure, carbon lattice parameters, mechanical properties, thermal conductivity, electric conductivity, and corrosive resistance. The reported manufacturing approach is suitable for designing the foam microstructure, including the strut design with a graded microstructure.

Key words： foam vitreous carbon reticulated cellular structure pyrolysis

收稿日期: 2016-01-14 出版日期: 2016-05-11

Corresponding Author(s): Oleg SMORYGO

引用本文:

. [J]. Frontiers of Materials Science, 2016, 10(2): 157-167.
Oleg SMORYGO,Alexander MARUKOVICH,Vitali MIKUTSKI,Vassilis STATHOPOULOS,Siarhei HRYHORYEU,Vladislav SADYKOV. Tailoring properties of reticulated vitreous carbon foams with tunable density. Front. Mater. Sci., 2016, 10(2): 157-167.

链接本文:

https://academic.hep.com.cn/foms/CN/10.1007/s11706-016-0338-8
https://academic.hep.com.cn/foms/CN/Y2016/V10/I2/157

Fig.1

Fig.2

Fig.3

Fig.4

Tab.1

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Fig.11

Fig.12

Fig.13

Fig.14

1	Friedrich J M, Ponce-de-Leon C, Reade G W, . Reticulated vitreous carbon as an electrode material. Journal of Electroanalytical Chemistry, 2004, 561: 203–217
2	Czarnecki J S, Blackmore M, Jolivet S, . Bone growth on Reticulated Vitreous Carbon foam scaffolds and implementation of Cellular Automata modeling as a predictive tool. Carbon, 2014, 79: 135–148
3	Banerjee A, Saha D, Guru Row T N, . A soluble-lead redox flow battery with corrugated graphite sheet and reticulated vitreous carbon as positive and negative current collectors. Bulletin of Materials Science, 2013, 36(1): 163–170
4	Chakhovskoi A G, Hunt C E, Forsberg G, . Reticulated vitreous carbon field emission cathodes for light source applications. Journal of Vacuum Science & Technology B, 2003, 21(1): 571–575
5	Gallego N C, Klett J W. Carbon foams for thermal management. Carbon, 2003, 41(7): 1461–1466
6	Li Q, Batchelor-McAuley C, Lawrence N S, . A flow system for hydrogen peroxide production at reticulated vitreous carbon via electroreduction of oxygen. Journal of Solid State Electrochemistry, 2014, 18(5): 1215–1221
7	Xiao N, Zhou Y, Ling Z, . Carbon foams made of in situ produced carbon nanocapsules and the use as a catalyst for oxidative dehydrogenation of ethylbenzene. Carbon, 2013, 60: 514–522
8	Gokhale A A, Kumar N V R, Sudhakar B, . Cellular metals and ceramics for defence applications. Defence Science Journal, 2011, 61(5): 567–575
9	Xiao N, Zhou Y, Ling Z, . Synthesis of a carbon nanofiber/carbon foam composite from coal liquefaction residue for the separation of oil and water. Carbon, 2013, 59: 530–536
10	Letellier M, Macutkevic J, Paddubskaya A, . Microwave dielectric properties of tannin-based carbon foams. Ferroelectrics, 2015, 479(1): 119–126
11	Xiao N, Ling Z, Zhou Y, . Synthesis and structure of carbon belts made of carbon nanofibers supported on carbon foams. Carbon, 2013, 61: 386–394
12	Goncalves E S, Dalmolin C, Biaggio S R, . Influence of heat treatment temperature on the morphological and structural aspects of reticulated vitreous carbon used in polyaniline electrosynthesis. Applied Surface Science, 2007, 253(20): 8340–8344
13	Manocha S M, Patel K, Manocha L M. Development of carbon foam from phenolic resin via template route. Indian Journal of Engineering & Materials Science., 2010, 17(5): 338–342
14	Inagaki M, Qiu J S, Guo Q G. Carbon foam: preparation and application. Carbon, 2015, 87: 128–152
15	Cowlard F C, Lewis J C. Vitreous carbon - a new form of carbon. Journal of Materials Science, 1967, 2(6): 507–512
16	Smorygo O, Marukovich A, Mikutski V, . Macrocellular vitreous carbon with the improved mechanical strength. Frontiers of Materials Science, 2015, 9(4): 413–417
17	Zhang Y, Yuan Z, Zhou Y. Effect of furfural alcohol/phenol-formaldehyde resin mass ratio on the properties of porous carbon. Materials Letters, 2013, 109: 124–126
18	Martinez de Yuso A, Lagel M C, Pizzi A, . Structure and properties of rigid foams derived from quebracho tannin. Materials & Design, 2014, 63: 208–212
19	Tondi G, Fierro V, Pizzi A, . Tannin-based carbon foams. Carbon, 2009, 47(6): 1480–1492
20	ERG Materials and Aerospace Corporation. 900 Stanford Avenue, Oakland, CA 94608, USA: Duocel® reticulated vitreous carbon foam datasheet
21	Ultramet. Advanced Materials Solutions. 12173 Montague Street, Pacoima CA 91331, USA: Reticulated vitreous carbon foam datasheet
22	Ashby M F. The properties of foams and lattices. Philosophical Transactions of the Royal Society A, 2006, 364(1838): 15–30
23	Smorygo O, Mikutski V, Marukovich A, . An inverted spherical model of an open-cell foam structure. Acta Materialia, 2011, 59(7): 2669–2678
24	Jana P, Fierro V, Pizzi A, . Thermal conductivity improvement of composite carbon foams based on tannin-based disordered carbon matrix and graphite fillers. Materials & Design, 2015, 83: 635–643
25	Pekala W R, Hopper R W. Low-density microcellular carbon foams. Journal of Materials Science, 1987, 22(5): 1840–1844
26	Leonov A N, Smorygo O L, Sheleg V K. Monolithic catalyst supports with foam structure. Reaction Kinetics and Catalysis Letters, 1997, 60(2): 259–267
27	Klug H P, Alexander L E. X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials. 2nd ed. New York: Wiley, 1974
28	Kurauchi T, Sato N, Kamigaito O, . Mechanism of high energy absorption by foamed materials-foamed rigid polyurethane and foamed glass. Journal of Materials Science, 1984, 19(3): 871–880
29	Gibson L J, Ashby M F. The mechanics of three-dimensional cellular materials. Proceedings of the Royal Society of London. Series A, 1782, 1982(382): 43–59
30	Brezny R, Green D. Fracture behavior of open-cell ceramics. Journal of the American Ceramic Society, 1989, 72(7): 1145–1152
31	Li X, Basso M C, Braghiroli F L, . Tailoring the structure of cellular vitreous carbon foams. Carbon, 2012, 50(5): 2026–2036
32	Szczurek A, Fierro V, Pizzi A, . Carbon meringues derived from flavanoid tannins. Carbon, 2013, 65: 214–227
33	Klett J W, McMillan A D, Gallego N C, . The role of structure on the thermal properties of graphitic foams. Journal of Materials Science, 2004, 39(11): 3659–3676
34	Nakamura K, Morooka H, Tanabe Y, . Surface oxidation and/or corrosion behavior of glass-like carbon in sulfuric and nitric acids, and in aqueous hydrogen peroxide. Corrosion Science, 2011, 53(12): 4010–4013
35	Nakamura K, Tanabe Y, Yasuda E. Analysis of the oxidation behavior of neat and Ta-alloyed glass-like carbons heat-treated at 1200 and 3000°C by nitric, sulfuric and hydrofluoric acid. Journal of Alloys and Compounds, 2006, 414(1–2): 186–189

Viewed

Full text

Abstract

Cited

Shared

Discussed