A floating-catalyst spray pyrolysis method was used to synthesize carbon nanotube (CNT) thin films. With the use of ammonium chloride as a pore-former and epoxy resin (EP) as an adhesive, CNT/EP composite films with a porous structure were prepared through the post-heat treatment. These films have excellent thermal insulation (0.029--0.048 W·m−1·K−1) at the thickness direction as well as a good thermal conductivity (40--60 W·m−1·K−1) in the film plane. This study provides a new film material for thermal control systems that demand a good thermal conductivity in the plane but outstanding thermal insulation at the thickness direction.
O Kaynakli. A study on residential heating energy requirement and optimum insulation thickness. Renewable Energy, 2008, 33(6): 1164–1172 https://doi.org/10.1016/j.renene.2007.07.001
2
K Ghazi Wakili, B Binder, R Vonbank. A simple method to determine the specific heat capacity of thermal insulations used in building construction. Energy and Building, 2003, 35(4): 413–415 https://doi.org/10.1016/S0378-7788(02)00112-3
3
M Osmani, J Glass, A D F. PriceArchitects’ perspectives on construction waste reduction by design. Waste Management, 2008, 28(7): 1147‒1158 https://doi.org/10.1016/j.wasman.2007.05.011
4
J Song, Y Liu, L Chen, et al.. Current research status and development of thermal insulating materials in the world. Materials Review, 2010, 24(S1): 378–380, 394 (in Chinese)
5
J Adamczyk, R Dylewski. The impact of thermal insulation investments on sustainability in the construction sector. Renewable & Sustainable Energy Reviews, 2017, 80(3): 421–429 https://doi.org/10.1016/j.rser.2017.05.173
K N Maamur, U S Jais, S Y S Yahya. Magnetic phase development of iron oxide-SiO2 aerogel and xerogel prepared using rice husk ash as precursor. Ieice Technical Report Component Parts & Materials, 2010, 103(1217): 294–301 https://doi.org/10.1063/1.3377832
9
B Stocker, A Baiker. Zirconia aerogels: effect of acid-to-alkoxide ratio, alcoholic solvent and supercritical drying method on structural properties. Journal of Non-Crystalline Solids, 1998, 223(3): 165–178 https://doi.org/10.1016/S0022-3093(97)00340-2
L Gan, Z Xu, Y Feng, et al.. Synthesis of alumina aerogels by ambient drying method and control of their structures. Journal of Porous Materials, 2005, 12(4): 317–321 https://doi.org/10.1007/s10934-005-3130-1
12
P R Aravind, P Shajesh, G D Soraru, et al.. Ambient pressure drying: a successful approach for the preparation of silica and silica based mixed oxide aerogels. Journal of Sol-Gel Science and Technology, 2010, 54: 105–117 https://doi.org/10.1007/s10971-010-2164-2
13
Z Dong, J Yan, H Tu, et al.. Studying on the preparation and application of silica aerogel composites for thermal insulation. New Chemical Materials, 2005, 33(3): 46–48
14
B Peng, M Locascio, P Zapol, et al.. Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements. Nature Nanotechnology, 2008, 3(10): 626–631 https://doi.org/10.1038/nnano.2008.211
pmid: 18839003
M F De Volder, S H Tawfick, R H Baughman, et al.. Carbon nanotubes: present and future commercial applications. Science, 2013, 339(6119): 535–539 https://doi.org/10.1126/science.1222453
pmid: 23372006
17
H Zhang, X He, Y Li. Synthesis and characterization of SiO2 thermal insulation aerogel doped CNTs. Rare Metal Materials and Engineering, 2007, 36(S1): 567–569 (in Chinese)
18
R Kohlmeyer, M Lor, J Deng, et al.. Preparation of stable carbon nanotube aerogels with high electrical conductivity and porosity. Carbon, 2011, 49(7): 2352–2361 https://doi.org/10.1016/j.carbon.2011.02.001
19
Z S Wu, S Yang, Y Sun, et al.. 3D nitrogen-doped graphene aerogel-supported Fe3O4 nanoparticles as efficient electrocatalysts for the oxygen reduction reaction. Journal of the American Chemical Society, 2012, 134(22): 9082–9085 https://doi.org/10.1021/ja3030565
pmid: 22624986
20
L Dong, Q Yang, C Xu, et al.. Facile preparation of carbon nanotube aerogels with controlled hierarchical microstructures and versatile performance. Carbon, 2015, 90: 164–171 https://doi.org/10.1016/j.carbon.2015.04.004
21
A Mikhalchan, Z Fan, T Q Tran, et al.. Continuous and scalable fabrication and multifunctional properties of carbon nanotube aerogels from the floating catalyst method. Carbon, 2016, 102: 409–418 https://doi.org/10.1016/j.carbon.2016.02.057
22
Y Jiang, Z Xu, T Huang, et al.. Direct 3D printing of ultralight graphene oxide aerogel microlattices. Advanced Functional Materials, 2018, 28(16): 1707024 https://doi.org/10.1002/adfm.201707024
23
Z Y Wu, C Li, H W Liang, et al.. Ultralight, flexible, and fire-resistant carbon nanofiber aerogels from bacterial cellulose. Angewandte Chemie International Edition, 2013, 52(10): 2925–2929 https://doi.org/10.1002/anie.201209676
pmid: 23401382
24
H Chien, W Cheng, Y Wang, et al.. Ultrahigh specific capacitances for super capacitors achieved by nickel cobaltite/carbon aerogel composites. Advanced Functional Materials, 2012, 22(23): 5038–5043 https://doi.org/10.1002/adfm.201201176
25
Y Si, X Wang, C Yan, et al.. Ultralight biomass-derived carbonaceous nanofibrous aerogels with superelasticity and high pressure-sensitivity. Advanced Materials, 2016, 28(43): 9512–9518 https://doi.org/10.1002/adma.201603143
pmid: 27615677
26
Z Lin, Z Zeng, X Gui, et al.. Carbon nanotube sponges, aerogels, and hierarchical composites: Synthesis, properties, and energy applications. Advanced Energy Materials, 2016, 6: 1600554–26 pages) https://doi.org/10.1002/aenm.201600554
