Please wait a minute...
Frontiers of Structural and Civil Engineering

ISSN 2095-2430

ISSN 2095-2449(Online)

CN 10-1023/X

邮发代号 80-968

2019 Impact Factor: 1.68

Frontiers of Architecture and Civil Engineering in China  2007, Vol. 1 Issue (2): 176-181   https://doi.org/10.1007/s11709-007-0019-x
  本期目录
Limit of axial force ratio and requirement for stirrups of RC columns with special shape
Limit of axial force ratio and requirement for stirrups of RC columns with special shape
WANG Yiqun, XU Yidong, ZHAO Yanjing, CHEN Yunxia
School of Civil Engineering, Tianjin University, Tianjin 300072, China
 全文: PDF(436 KB)  
Abstract:Thousands of columns with special shape are analyzed by nonlinear numerical methods. The ductility is calculated to investigate the limit of the axial force ratio and circumstantial requirement for stirrups of an reinforced concrete (RC) column with special shape, in the point of view of the characteristic value for providing stirrup. The limit of the axial force ratio of columns with special shape in relation to the characteristic value of the stirrup is obtained. Then, the effect of stirrup arrangement on the ductility of the RC column is discussed in case of buckling of the longitudinal reinforcement and constraint concrete columns. The complete requirement for stirrups of RC column with special shape is given.
出版日期: 2007-06-05
 引用本文:   
. Limit of axial force ratio and requirement for stirrups of RC columns with special shape[J]. Frontiers of Architecture and Civil Engineering in China, 2007, 1(2): 176-181.
WANG Yiqun, XU Yidong, ZHAO Yanjing, CHEN Yunxia. Limit of axial force ratio and requirement for stirrups of RC columns with special shape. Front. Struct. Civ. Eng., 2007, 1(2): 176-181.
 链接本文:  
https://academic.hep.com.cn/fsce/CN/10.1007/s11709-007-0019-x
https://academic.hep.com.cn/fsce/CN/Y2007/V1/I2/176
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed