Please wait a minute...
Frontiers of Materials Science

ISSN 2095-025X

ISSN 2095-0268(Online)

CN 11-5985/TB

Postal Subscription Code 80-974

2018 Impact Factor: 1.701

Front. Mater. Sci.    2008, Vol. 2 Issue (3) : 301-305    https://doi.org/10.1007/s11706-008-0047-z
Growth and passivation of aluminum etch tunnels at on-off controlling DC
WANG Mei, HE Ye-dong
Beijing Key Lab for Corrosion, Erosion and Surface Technique, University of Science and Technology Beijing
 Download: PDF(183 KB)   HTML
 Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract In order to control the length of tunnels within Al foil etched in HCl-H2SO4 solutions, the influence of on-off control of the DC on growth and passivation of tunnels has been investigated. From SEM of oxide replicas of tunnels, it was found that, in a given etchant solution at a special temperature, the longest tunnel length depended only on the turn-on interval of DC, and the number of pits was determined by the total electricity of the DC. The corresponding mechanism is that the potential of Al foil changed rapidly at the point of the switch of DC by the result according to the anodic polarization curve and potential-time (E-t) response curves. The moment the DC was switched on, the potential increased immediately over pitting potential, leading to nucleation of pits at the surface and growth of tunnels at special lengths. When the DC was switched off, the potential rapidly decreased to a passive state, leading to the cessation of nucleation and the death of tunnels. Therefore, the longest tunnel length can be controlled and a non-piercing layer can be obtained. Furthermore, consequent etching of Al foil by the on-off control of the DC is beneficial for maintaining a good mechanical strength.
Issue Date: 05 September 2008
 Cite this article:   
HE Ye-dong,WANG Mei. Growth and passivation of aluminum etch tunnels at on-off controlling DC[J]. Front. Mater. Sci., 2008, 2(3): 301-305.
 URL:  
https://academic.hep.com.cn/foms/EN/10.1007/s11706-008-0047-z
https://academic.hep.com.cn/foms/EN/Y2008/V2/I3/301
1 Chen W D, Zhang H W, Gu Y M, et al.. Current situation and development of Al electrolyticcapacitors. Electronic Components and Materials, 2004, 23(9): 46–48
2 Mccafferty E . Sequenceof steps in the pitting of aluminum by chloric ions. Corrosion Science, 2003, 45: 1421–1438.
doi:10.1016/S0010‐938X(02)00231‐7
3 Szklarska-Smialowska Z . Mechanismof pit nucleation by electrical breakdown of the passive film. Corrosion Science, 2002, 44: 1143–1149.
doi:10.1016/S0010‐938X(01)00113‐5
4 Muthukrishnan K, Heber K R, Makino T . Interfacial void model for corrosion pit initiation ofaluminum. Journal of the ElectrochemicalSociety, 2004, 151(6): B340–B346.
doi:10.1149/1.1715091
5 Osawa N, Fukuoka K . Pit nucleation behavior ofaluminum foil for electrolytic capacitors during early stage of DCetching. Corrosion Science, 2000, 42: 585–597.
doi:10.1016/S0010‐938X(99)00117‐1
6 Wang J Z, Yan K P, Yan J X . Growth velocity and pattern of initiation tunnels onDC etching of anodic aluminum foil for high voltage capacitors. Electronic Components and Materials, 2001, 20(5): 20–21 (in Chinese)
7 Alwitt R S, Uchi H, Beck T R, et al.. Electrochemical tunnel etching of aluminum. Journal of the Electrochemical Society, 1984, 131(1): 13–17.
doi:10.1149/1.2115495
8 Heber K R, Alkire R . Growth and passivation ofaluminum etch tunnels. Journal of the ElectrochemicalSociety, 1988, 135(9): 2146–2157.
doi:10.1149/1.2096231
9 Heber K R, Alkire R . Growth rates of aluminumetch tunnels. Journal of the ElectrochemicalSociety, 1988, 135(10): 2447–2451.
doi:10.1149/1.2095356
10 Hibino A, Tamaki M, Watanabe Y, et al.. The effect of sulfuric acid on tunnel etchingof aluminum in hydrochloric acid. Journalof Japan Institute of Light Metals, 1992, 42(8): 440–445 (in Japanese)
11 Wang G, Yan K P, Yan J X . The Influence of H2SO4/HCl ratio and Al3+ contenton the tunnel growth of high purity aluminum foil. Electronic Components and Materials, 2003, 22(10): 10–12 (in Chinese)
12 Ono S, Makino T, Alwitt R S . Crystallographic pit growth on aluminum (100). Journal of the Electrochemical Society, 2005, 152(2): B39–B44.
doi:10.1149/1.1839471
13 Wall F D, Martinez M A, Vandenavyle J J . Relationship between induction time for pitting and pittingpotential for high-purity aluminum. Journalof the Electrochemical Society, 2004, 151(6): B354–B358.
doi:10.1149/1.1731487
14 Muthukrishnan K, Heber K R . Kinetic model for aluminumdissolution in corrosion pits. Journalof the Electrochemical Society, 2004, 151(2): B45–B52.
doi:10.1149/1.1635386
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed