Abstract It is of great significance to determine the critical transition current from globular transfer to spray transfer in gas metal arc welding (GMAW) because metal transfer modes affect the weld quality and welding productivity. In this study, a simple model is developed to calculate the critical transition current based on the analysis of various forces exerted on a pendent droplet at the electrode tip. It is found that the force exerted by the incoming molten metal from the wire on the drop, i.e., the term
Issue Date: 05 December 2008
Cite this article:
WU Chuan-song,ZOU De-gang,GAO Jin-qiang. Determining the critical transition current for
metal transfer in gas metal arc welding (GMAW)[J]. Front. Mater. Sci.,
2008, 2(4): 397-401.
Messler Jr R W . Principles of Welding. New York: John Wiley & Sons Inc., 1999
2
Amson J C . An analysis of the gas-shielded consumable metal arc welding system. Welding Journal, 1962, 41(4): 232–249
3
Waszink J H, Graat L H J . Experiment investigationof the force acting on a drop of weld metal. Welding Journal, 1983, 62(4): 108–116
4
Lancaster J F . The Physics of Welding. Oxford: Pergamon Press, 1984
5
Allum C J . Metal transfer in arc welding as a varicose instability: I. Varicoseinstability in a current carrying liquid cylinder with surface charge. Journal of Physics D: Applied Physics, 1985, 18: 1431–1446. doi:10.1088/0022-3727/18/7/029
6
Shaw R . Thedripping faucet as a model chaotic system. The Science Frontier Express, AerialPress Inc., 1984
7
Waszink J H, Van Den Heuvel G JP M . Heat generationand heat flow in the filler metal in GMA welding. Welding Journal, 1982, 61(8): 269–282
8
Kim Y S, Eagar T W . Analysis of metal transferin gas metal arc welding. Welding Journal, 1993, 72(6): 269–277
9
Lesenwich A . Controlof melting rate and metal transfer in gas shielded metal arc welding. Welding Journal, 1958, 37(4): 343–353
