|
|
Novel robust cellulose-based foam with pH and light dual-response for oil recovery |
Qian WANG1, Guihua MENG1, Jianning WU1, Yixi WANG1, Zhiyong LIU1(), Xuhong GUO1,2 |
1. School of Chemistry and Chemical Engineering, Shihezi University/Key Laboratory for Green Processing of Chemical Engineering of Xinjiang Bingtuan, Key Laboratory for Green Processing of Chemical Engineering of Xinjiang Bingtuan/Key Laboratory of Materials-Oriented Chemical Engineering of Xinjiang Uygur Autonomous Region/Engineering Research Center of Materials-Oriented Chemical Engineering of Xinjiang Bingtuan, Shihezi 832003, China 2. State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China |
|
|
Abstract We fabricated pH and light dual-responsive adsorption materials which could induce the transition of surface wettability between hydrophobicity and hydrophilicity by using ATRP. The structure and morphology of adsorption materials were confirmed by ATR-FTIR, XPS, TGA and SEM. It showed that the modified cellulose (CE)-based foam was hydrophobic, which can adsorb a range of oils and organic solvents in water under pH= 7.0 or visible light irradiation (λ>500 nm). Meanwhile, the wettability of robust CE-based foam can convert hydrophobicity into hydrophilicity and underwater oleophobicity under pH= 3.0 or UV irradiation (λ = 365 nm), giving rise to release oils and organic solvents. Most important of all, the adsorption and desorption processes of the modified CE-based foam could be switched by external stimuli. Furthermore, the modified CE-based foam was not damaged and still retained original performance after reversible cycle repeated for many times with variation of surface wettability. In short, it indicates that CE-based foam materials with switchable surface wettability are new responsive absorbent materials and have owned potential application in the treatment of oil recovery.
|
Keywords
cellulose-based foam
dual-responsive
adsorption materials
switchable wettability
oil recovery
|
Corresponding Author(s):
Zhiyong LIU
|
Online First Date: 18 May 2018
Issue Date: 29 May 2018
|
|
1 |
Levy J K, Gopalakrishnan C. Promoting ecological sustainability and community resilience in the US gulf coast after the 2010 deepwater horizon oil spill. Journal of Natural Resources Policy Research, 2010, 2(3): 297–315
https://doi.org/10.1080/19390459.2010.500462
|
2 |
Li L, Liu F, Duan H, et al.. The preparation of novel adsorbent materials with efficient adsorption performance for both chromium and methylene blue. Colloids and Surfaces B: Biointerfaces, 2016, 141: 253–259
https://doi.org/10.1016/j.colsurfb.2015.06.023
pmid: 26859116
|
3 |
Silva C F P M, Davila L A, Junior A G B, et al.. Evaluation of the use of adsorbent materials in the removal of nitrogen compounds from gas oil as a pre-treatment for feeds for fluid catalytic cracking units. Canadian Journal of Chemical Engineering, 2016, 94(10): 1891–1900
https://doi.org/10.1002/cjce.22558
|
4 |
Sharipova A A, Aidarova S B, Bekturganova N E, et al.. Triclosan as model system for the adsorption on recycled adsorbent materials. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016, 505: 193–196
https://doi.org/10.1016/j.colsurfa.2016.04.049
|
5 |
Li L, Liu X L, Geng H Y, et al.. A MOF/graphite oxide hybrid (MOF: HKUST-1) material for the adsorption of methylene blue from aqueous solution. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2013, 1(35): 10292
https://doi.org/10.1039/c3ta11478c
|
6 |
Yan H, Tao X, Yang Z, et al.. Effects of the oxidation degree of graphene oxide on the adsorption of methylene blue. Journal of Hazardous Materials, 2014, 268: 191–198
https://doi.org/10.1016/j.jhazmat.2014.01.015
pmid: 24491443
|
7 |
Kyzas G Z, Travlou N A, Deliyanni E A. The role of chitosan as nanofiller of graphite oxide for the removal of toxic mercury ions. Colloids and Surfaces B: Biointerfaces, 2014, 113: 467–476
https://doi.org/10.1016/j.colsurfb.2013.07.055
pmid: 23973000
|
8 |
Jurado-Sánchez B, Sattayasamitsathit S, Gao W, et al.. Self-propelled activated carbon Janus micromotors for efficient water purification. Small, 2015, 11(4): 499–506
https://doi.org/10.1002/smll.201402215
pmid: 25207503
|
9 |
Nekouei F, Nekouei S, Tyagi I, et al.. Kinetic, thermodynamic and isotherm studies for acid blue 129 removal from liquids using copper oxide nanoparticle-modified activated carbon as a novel adsorbent. Journal of Molecular Liquids, 2015, 201: 124–133
https://doi.org/10.1016/j.molliq.2014.09.027
|
10 |
Masson S, Gineys M, Delpeux-Ouldriane S, et al.. Single, binary, and mixture adsorption of nine organic contaminants onto a microporous and a microporous/mesoporous activated carbon cloth. Microporous and Mesoporous Materials, 2016, 234: 24– 34
https://doi.org/10.1016/j.micromeso.2016.07.001
|
11 |
Ozan Aydin G, Bulbul Sonmez H. Hydrophobic poly(alkoxysilane) organogels as sorbent material for oil spill cleanup. Marine Pollution Bulletin, 2015, 96(1–2): 155–164
https://doi.org/10.1016/j.marpolbul.2015.05.033
pmid: 26002096
|
12 |
Zhu H, Chen D, An W, et al.. A robust and cost-effective superhydrophobic graphene foam for efficient oil and organic solvent recovery. Small, 2015, 11(39): 5222–5229
https://doi.org/10.1002/smll.201501004
pmid: 26265103
|
13 |
Song S, Yang H, Su C, et al.. Ultrasonic-microwave assisted synthesis of stable reduced graphene oxide modified melamine foam with superhydrophobicity and high oil adsorption capacities. Chemical Engineering Journal, 2016, 306: 504–511
https://doi.org/10.1016/j.cej.2016.07.086
|
14 |
Hokkanen S, Bhatnagar A, Sillanpää M. A review on modification methods to cellulose-based adsorbents to improve adsorption capacity. Water Research, 2016, 91: 156–173
https://doi.org/10.1016/j.watres.2016.01.008
pmid: 26789698
|
15 |
Pham V H, Dickerson J H. Superhydrophobic silanized melamine sponges as high efficiency oil absorbent materials. ACS Applied Materials & Interfaces, 2014, 6(16): 14181–14188
https://doi.org/10.1021/am503503m
pmid: 25039789
|
16 |
Gu J, Xiao P, Chen J, et al.. Robust preparation of superhydrophobic polymer/carbon nanotube hybrid membranes for highly effective removal of oils and separation of water-in-oil emulsions. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2014, 2(37): 15268
https://doi.org/10.1039/C4TA01603C
|
17 |
Yang Z, Wang L, Sun W, et al.. Superhydrophobic epoxy coating modified by fluorographene used for anti-corrosion and self-cleaning. Applied Surface Science, 2017, 401: 146–155
https://doi.org/10.1016/j.apsusc.2017.01.009
|
18 |
Wang H, Wang E, Liu Z, et al.. A novel carbon nanotubes reinforced superhydrophobic and superoleophilic polyurethane sponge for selective oil–water separation through a chemical fabrication. Journal of Materials Chemistry A, 2015, 3(1): 266–273
https://doi.org/10.1039/C4TA03945A
|
19 |
Cao Y, Zhang X, Tao L, et al.. Mussel-inspired chemistry and Michael addition reaction for efficient oil/water separation. ACS Applied Materials & Interfaces, 2013, 5(10): 4438–4442
https://doi.org/10.1021/am4008598
pmid: 23593981
|
20 |
Xue C H, Guo X J, Zhang M M, et al.. Fabrication of robust superhydrophobic surfaces by modification of chemically roughened fibers via thiol–ene click chemistry. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2015, 3(43): 21797–21804
https://doi.org/10.1039/C5TA04802H
|
21 |
Ge J, Ye Y D, Yao H B, et al.. Pumping through porous hydrophobic/oleophilic materials: an alternative technology for oil spill remediation. Angewandte Chemie International Edition, 2014, 53(14): 3612–3616
https://doi.org/10.1002/anie.201310151
pmid: 24591265
|
22 |
Cheng Z, Wang J, Lai H, et al.. pH-Controllable on-demand oil/water separation on the switchable superhydrophobic/superhydrophilic and underwater low-adhesive superoleophobic copper mesh film. Langmuir, 2015, 31(4): 1393–1399
https://doi.org/10.1021/la503676a
pmid: 25563562
|
23 |
Xue C, Li Y R, Hou J L, et al.. Self-roughened superhydrophobic coatings for continuous oil–water separation. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2015, 3(19): 10248–10253
https://doi.org/10.1039/C5TA01014D
|
24 |
Zhou Y N, Li J J, Luo Z H. Toward efficient water/oil separation material: Effect of copolymer composition on pH-responsive wettability and separation performance. AIChE Journal, 2016, 62(5): 1758–1771
https://doi.org/10.1002/aic.15145
|
25 |
Li J J, Zhou Y N, Luo Z H. Smart fiber membrane for pH-induced oil/water separation. ACS Applied Materials & Interfaces, 2015, 7(35): 19643–19650
https://doi.org/10.1021/acsami.5b04146
pmid: 26293145
|
26 |
Xu Z, Zhao Y, Wang H, et al.. Fluorine-free superhydrophobic coatings with pH-induced wettability transition for controllable oil–water separation. ACS Applied Materials & Interfaces, 2016, 8(8): 5661–5667
https://doi.org/10.1021/acsami.5b11720
pmid: 26837794
|
27 |
Xu Z, Zhao Y, Wang H, et al.. A superamphiphobic coating with an ammonia-triggered transition to superhydrophilic and superoleophobic for oil–water separation. Angewandte Chemie International Edition, 2015, 54(15): 4527–4530
https://doi.org/10.1002/anie.201411283
pmid: 25694216
|
28 |
Cheng Z, Lai H, Du Y, et al.. pH-Induced reversible wetting transition between the underwater superoleophilicity and superoleophobicity. ACS Applied Materials & Interfaces, 2014, 6(1): 636–641
https://doi.org/10.1021/am4047393
pmid: 24319986
|
29 |
Dang Z, Liu L, Li Y, et al.. In situ and ex situ pH-responsive coatings with switchable wettability for controllable oil/water separation. ACS Applied Materials & Interfaces, 2016, 8(45): 31281–31288
https://doi.org/10.1021/acsami.6b09381
pmid: 27808490
|
30 |
Zhou Y N, Li J J, Luo Z H. PhotoATRP-based fluorinated thermosensitive block copolymer for controllable water/oil separation. Industrial & Engineering Chemistry Research, 2015, 54(43): 10714–10722
https://doi.org/10.1021/acs.iecr.5b02394
|
31 |
Li J J, Zhou Y N, Luo Z H. Thermo-responsive brush copolymers with structure-tunable LCST and switchable surface wettability. Polymer, 2014, 55(25): 6552–6560
https://doi.org/10.1016/j.polymer.2014.10.025
|
32 |
Ou R, Wei J, Jiang L, et al.. Robust thermoresponsive polymer composite membrane with switchable superhydrophilicity and superhydrophobicity for efficient oil–water separation. Environmental Science & Technology, 2016, 50(2): 906–914
https://doi.org/10.1021/acs.est.5b03418
pmid: 26704724
|
33 |
Pan S, Guo R, Xu W. Photoresponsive superhydrophobic surfaces for effective wetting control. Soft Matter, 2014, 10(45): 9187–9192
https://doi.org/10.1039/C4SM01731E
pmid: 25322263
|
34 |
Yong J, Chen F, Yang Q, et al.. Photoinduced switchable underwater superoleophobicity–superoleophilicity on laser mo-dified titanium surfaces. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2015, 3(20): 10703–10709
https://doi.org/10.1039/C5TA01782C
|
35 |
Che H, Huo M, Peng L, et al.. CO2-Responsive nanofibrous membranes with switchable oil/water wettability. Angewandte Chemie International Edition, 2015, 54(31): 8934–8938
https://doi.org/10.1002/anie.201501034
pmid: 26079643
|
36 |
Wang Y, Zhao L, Peng H, et al.. Removal of anionic dyes from aqueous solutions by cellulose-based adsorbents: equilibrium, kinetics, and thermodynamics. Journal of Chemical & Engineering Data, 2016, 61(9): 3266–3276
https://doi.org/10.1021/acs.jced.6b00340
|
37 |
Peng H, Wang H, Wu J, et al.. Preparation of superhydrophobic magnetic cellulose sponge for removing oil from water. Industrial & Engineering Chemistry Research, 2016, 55(3): 832–838
https://doi.org/10.1021/acs.iecr.5b03862
|
38 |
Peng H, Wu J, Wang Y, et al.. A facile approach for preparation of underwater superoleophobicity cellulose/chitosan composite aerogel for oil/water separation. Applied Physics A: Materials Science & Processing, 2016, 122(5): 516
https://doi.org/10.1007/s00339-016-0049-0
|
39 |
Meng G, Peng H, Wu J, et al.. Fabrication of superhydrophobic cellulose/chitosan composite aerogel for oil/water separation. Fibers and Polymers, 2017, 18(4): 706–712
https://doi.org/10.1007/s12221-017-1099-4
|
40 |
Wu T, Zou G, Hu J, et al.. Fabrication of photoswitchable and thermotunable multicolor fluorescent hybrid silica nanoparticles coated with dye-labeled poly(N-isopropylacrylamide) brushes. Chemistry of Materials, 2009, 21(16): 3788–3798
https://doi.org/10.1021/cm901072g
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|