Please wait a minute...
Frontiers of Electrical and Electronic Engineering

ISSN 2095-2732

ISSN 2095-2740(Online)

CN 10-1028/TM

Front. Electr. Electron. Eng.    2007, Vol. 2 Issue (4) : 425-431    https://doi.org/10.1007/s11460-007-0079-7
Research on a direct torque control for an electrically excited synchronous motor drive with low ripple in flux and torque
ZHOU Yangzhong, HU Yuwen, HUANG Wenxin, ZHONG Tianyun
Department of Electrical Engineering, Huaiying Institute, Huai′an 223001, China
 Download: PDF(536 KB)  
 Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract The electrically excited synchronous motor (ESM) has typically small synchronous inductance values and quite low transient values because of the damper windings mounted on the rotor. Therefore, the torque and stator flux linkage ripples are high in the direct torque control (DTC) drive of the ESM with a torque and flux linkage hysteresis controller (basic DTC). A DTC scheme with space vector modulation (SVM) for the ESM was investigated in this paper. It is based on the compensation of the stator flux linkage vector error using the space vector modulation in order to decrease the torque and flux linkage ripples and produce fixed switching frequency under the principle that the torque is controlled by the torque angle in the ESM. Compared with the basic DTC, the results of the simulation and experiment show that the torque and flux linkage ripples are reduced, the maximum current value is decreased during the startup, and the current distortion is much smaller in the steady-state under the SVM-DTC. The field-weakening control is incorporated with the SVM-DTC successfully.
Issue Date: 05 December 2007
 Cite this article:   
ZHOU Yangzhong,HU Yuwen,HUANG Wenxin, et al. Research on a direct torque control for an electrically excited synchronous motor drive with low ripple in flux and torque[J]. Front. Electr. Electron. Eng., 2007, 2(4): 425-431.
 URL:  
https://academic.hep.com.cn/fee/EN/10.1007/s11460-007-0079-7
https://academic.hep.com.cn/fee/EN/Y2007/V2/I4/425
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed