Optimal Timing and Recycling Operation Mode for Electro-Mechanical Products Active Remanufacturing

doi:10.15302/J-FEM-2016019

Front. Eng

2016, Vol. 3

Issue (2) : 115-122 https://doi.org/10.15302/J-FEM-2016019

ENGINEERING MANAGEMENT THEORIES AND METHODOLOGIES

Optimal Timing and Recycling Operation Mode for Electro-Mechanical Products Active Remanufacturing

Wang Gao,Tao Li(

),Shi-tong Peng,Liang Wang,Hong-chao Zhang

School of Mechanical Engineering, Dalian University of Technology, Dalian 116023, China

Download: PDF(582 KB) HTML
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks

Abstract

The uncertainties of remanufactured products in multi-life cycle service, such as injury and restoration process route, are comprehensively analyzed in the present study from perspectives of cost and the environment. Based on life cycle assessment method and the life cycle cost analysis, the optimal timing model of active remanufacturing for electro-mechanical products is established considering these uncertainties. In addition, regarding the active remanufacturing as its guidance, this study explores the economic efficiency and corresponding operation mode of electro-mechanical products when recycling in the optimal timing. To validate the optimal timing model for electro-mechanical products active remanufacturing, a specific type of product is taken as a case study with mathematical statistics method and Monte Carlo simulation.

Keywords electro-mechanical products active remanufacturing optimal timing reverse logistics recycling mode

Corresponding Author(s): Tao Li

Online First Date: 04 July 2016 Issue Date: 22 September 2016

Cite this article:

Wang Gao,Tao Li,Shi-tong Peng, et al. Optimal Timing and Recycling Operation Mode for Electro-Mechanical Products Active Remanufacturing[J]. Front. Eng, 2016, 3(2): 115-122.

URL:

https://academic.hep.com.cn/fem/EN/10.15302/J-FEM-2016019
https://academic.hep.com.cn/fem/EN/Y2016/V3/I2/115

Fig.1 Failure rate of electro-mechanical products.

Fig.2 System boundary of electro-mechanical products active remanufacturing.

Fig.3 The optimal timing model for active remanufacturing.

Fig.4 The model of LCA.

Fig.5 Diagram of product life cycle cost.

Fig.6 Recycling operation mode for electro-mechanical products.

Fig.7 The annual average cost of environment-economy of connecting rod.

Fig.8 The optimal timing interval for active remanufacturing.

1	Bose, I., & Anand, P. (2007). On returns policies with exogenous price. European Journal of Operational Research, 178, 782–788. https://doi.org/10.1016/j.ejor.2005.11.043
2	Bras, B., & Hammond, R. (1996). Towards design for remanufacturing–metrics for assessing remanufacturability. Proceedings of the 1st International Workshop on Reuse, 5–22.
3	Fleischmann, M., Beullens, P., Bloemhof-Ruwaard, J. M., & Van Wassenhove, L. N. (2001). The impact of product recovery on logistics network design. Production and Operations Management, 10, 156–173. https://doi.org/10.1111/j.1937-5956.2001.tb00076.x
4	Fleischmann, M., Van Nunen, J., & Gräve, B. (2003). Integrating closed-loop supply chains and spare-parts management at IBM. Interfaces, 33, 44–56. https://doi.org/10.1287/inte.33.6.44.25189
5	Frank, C., & Yakut, E. (2004). Process design to mobiles in the remanufacturing network.In Proceedings Global Conference on Sustainable Product Development and Life Cycle Engineering, 191–198.
6	Galbreth, M., & Blackburn, J. (2010). Optimal acquisition quantities in remanufacturing with condition uncertainty. Production and Operations Management, 19, 61–69. https://doi.org/10.1111/j.1937-5956.2009.01067.x
7	Guide, V. Jr. (2000). Production planning and control for remanufacturing: industry practice and research needs. Journal of Operations Management, 18, 467–483. https://doi.org/10.1016/S0272-6963(00)00034-6
8	Guide, V., & Van Wassenhove, L. (2002). The reverse supply chain. Harvard Business Review, 02.
9	Guide, V. Jr, & Van Wassenhove, L. (2009). The evolution of closed-loop supply chain research. Operations Research, 57, 10–18. https://doi.org/10.1287/opre.1080.0628
10	Hellweg, S., & Canals, L. (2014). Emerging approaches, challenges and opportunities in life cycle assessment. Science, 344, 1109–1113. https://doi.org/10.1126/science.1248361
11	Herbes, C., Friege, C., Baldo, D., & Mueller, K. (2015). Willingness to pay lip service? Applying a neuroscience-based method to WTP for green electricity. Energy Policy, 87, 562–572. https://doi.org/10.1016/j.enpol.2015.10.001
12	Huang, X. (1990). Reliability engineering.Beijing: Tsinghua University Press.
13	Ketzenberg, M. E., van der Laan, E., & Teunter, R. H. (2006). Value of information in closed loop supply chains. Production and Operations Management, 15, 393–406. https://doi.org/10.1111/j.1937-5956.2006.tb00253.x
14	Liu, C., Cao, H., Liu, F., Du, Y., & Ding, C. (2007). Comprehensive assessment model and its application of waste electromechanical products green remanufacturing. Modern Manufacturing Engineering, 11, 1–4.
15	Liu, G., Liu, T., Ke, Q., Song, S., & Zhou, D. (2013). Time interval decision-making method for active remanufacturing product based on Game Theory and Neural Network. Journal of Mechanical Engineering, 49, 29–35. https://doi.org/10.3901/JME.2013.07.029
16	Liu, Y., Xu, B., Shi, P., & Liu, B. (2011). Assessment indexes of used products remanufacturability. China Surface Engineering, 24, 94–99.
17	Liu, Z., Jiang, Q., Li, T., & Zhang, H. (2014). An optimal timing of engine remanufacturing-a real option approach. In 21st CIRP Conference on Life Cycle Engineering, Procedia CIRP. 15, 223–227.
18	Mckenna, R., Reith, S., Cail, S., Kessler, A., & Fichtner, W. (2013). Energy savings through direct secondary reuse: an exemplary analysis of the German automotive sector. Journal of Cleaner Production, 52, 103–112. https://doi.org/10.1016/j.jclepro.2013.02.032
19	Örsdemir, A., Kemahlıoglu-Ziya, E., & Parlaktürk, A. (2014). Competitive quality choice and remanufacturing. Production and Operations Management, 23, 48–64. https://doi.org/10.1111/poms.12040
20	Pasternack, B. (1985). Optimal pricing and returns policies for perishable commodities. Marketing Science, 4, 166–176. https://doi.org/10.1287/mksc.4.2.166
21	Seliger, G., Frank, C., Ciupek, M., & Basdere, B. (2004). Process and facility planning for mobile phone remanufacturing. Annals of the CIRP, 53, 9–12. https://doi.org/10.1016/S0007-8506(07)60633-7
22	Stock, J. (1992). Reverse logistics. Illinois: Council of Logistics Management, Oak Brook.
23	Teunter, R., & Flapper, S. (2010). Optimal core acquisition and remanufacturing policies under uncertain core quality fractions. European Journal of Operational Research, 210, 241–248. https://doi.org/10.1016/j.ejor.2010.06.015
24	Xu, B. (2007). Theory and technology of equipment remanufacture engineering.Beijing: National Defense Industry Press.
25	Xu, B. (2010). State of the art and future development in remanufacturing engineering. Transactions of Materials and Heat Treatment, 31, 10–14.
26	Xu, B., Dong, S., & Shi, P. (2013). States and prospects of China characterized quality guarantee technology system for remanufactured parts. Journal of Mechanical Engineering, 49, 84–90. https://doi.org/10.3901/JME.2013.20.084
27	Zalejska-Jonsson, A. (2014). Stated WTP and rational WTP: Willingness to pay for green apartments in Sweden. Sustainable Cities and Society, 13, 46–56. https://doi.org/10.1016/j.scs.2014.04.007
28	Zhang, J., & Chen, M. (2015). Assessing the impact of China's vehicle emission standards on diesel engine remanufacturing. Journal of Cleaner Production, 107, 177–184. https://doi.org/10.1016/j.jclepro.2015.03.103
29	Zhong, J., Fan, S., Yao, Y., & Yang, Y. (2003). Research on synthetical assessment for remanufacturability. Zhongguo Jixie Gongcheng, 14, 2110–2113.
30	Zhu, S., Xu, B., & Yao, J. (2003). Study of the foundation and method of remanufacturing design. China Surface Engineering, 16, 27–31.
31	Zikopoulos, C., & Tagaras, G. (2007). Impact of uncertainty in the quality of returns on the profitability of asingle-period refurbishing operation. European Journal of Operational Research, 182, 205–225. https://doi.org/10.1016/j.ejor.2006.10.025

[1]	Xiao-qiu Shi,Yan-yan Li,Wei Long. The Integration Model of Closed-Loop Supply Chain Resource Allocation Considering Remanufacturing[J]. Front. Eng, 2016, 3(2): 132-135.

Viewed

Full text

Abstract

Cited

Shared

Discussed