|
|
Ceramic water filter for point-of-use water treatment in developing countries: Principles, challenges and opportunities |
Haiyan Yang1,2, Shangping Xu3, Derek E. Chitwood4, Yin Wang5( ) |
1. SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China 2. School of Environment, South China Normal University, University Town, Guangzhou 510006, China 3. Department of Geosciences, University of Wisconsin–Milwaukee, Milwaukee, WI 53211, USA 4. Department of Engineering, Dordt University, Sioux Center, IA 51250, USA 5. Department of Civil and Environmental Engineering, University of Wisconsin–Milwaukee, Milwaukee, WI 53211, USA |
|
|
Abstract • CWF is a sustainable POU water treatment method for developing areas. • CWF manufacturing process is critical for its filtration performance. • Simultaneous increase of flow rate and pathogen removal is a challenge. • Control of pore size distribution holds promises to improve CWF efficiency. • Novel coatings of CWFs are a promising method to improve contaminant removal. Drinking water source contamination poses a great threat to human health in developing countries. Point-of-use (POU) water treatment techniques, which improve drinking water quality at the household level, offer an affordable and convenient way to obtain safe drinking water and thus can reduce the outbreaks of waterborne diseases. Ceramic water filters (CWFs), fabricated from locally sourced materials and manufactured by local labor, are one of the most socially acceptable POU water treatment technologies because of their effectiveness, low-cost and ease of use. This review concisely summarizes the critical factors that influence the performance of CWFs, including (1) CWF manufacturing process (raw material selection, firing process, silver impregnation), and (2) source water quality. Then, an in-depth discussion is presented with emphasis on key research efforts to address two major challenges of conventional CWFs, including (1) simultaneous increase of filter flow rate and bacterial removal efficiency, and (2) removal of various concerning pollutants, such as viruses and metal(loid)s. To promote the application of CWFs, future research directions can focus on: (1) investigation of pore size distribution and pore structure to achieve higher flow rates and effective pathogen removal by elucidating pathogen transport in porous ceramic and adjusting manufacture parameters; and (2) exploration of new surface modification approaches with enhanced interaction between a variety of contaminants and ceramic surfaces.
|
Keywords
Point-of-use water treatment
Ceramic water filter
Bacterial removal
Surface modification
Water quality
|
Corresponding Author(s):
Yin Wang
|
Issue Date: 14 May 2020
|
|
1 |
L S Abebe, X Chen, M D Sobsey (2016). Chitosan coagulation to improve microbial and turbidity removal by ceramic water filtration for household drinking water treatment. International Journal of Environmental Research and Public Health, 13(3): 269–279
https://doi.org/10.3390/ijerph13030269
|
2 |
L S Abebe, Y H Su, R L Guerrant, N S Swami, J A Smith (2015). Point-of-use removal of Cryptosporidium Parvum from water: Independent effects of disinfection by silver nanoparticles and silver ions and by physical filtration in ceramic porous media. Environmental Science & Technology, 49(21): 12958–12967
https://doi.org/10.1021/acs.est.5b02183
|
3 |
A R Bielefeldt, K Kowalski, R S Summers (2009). Bacterial treatment effectiveness of point-of-use ceramic water filters. Water Research, 43(14): 3559–3565
https://doi.org/10.1016/j.watres.2009.04.047
|
4 |
J Brown, M D Sobsey (2010). Microbiological effectiveness of locally produced ceramic filters for drinking water treatment in Cambodia. Journal of Water and Health, 8(1): 1–10
https://doi.org/10.2166/wh.2009.007
|
5 |
T F Clasen, K T Alexander, D Sinclair, S Boisson, R Peletz, H H Chang, F Majorin, S Cairncross (2015). Interventions to improve water quality for preventing diarrhoea. Cochrane Database of Systematic Reviews,
https://doi.org/10.1002/14651858.CD004794.pub3
|
6 |
T F Clasen, J Brown, S Collin, O Suntura, S Cairncross (2004). Reducing diarrhea through the use of household-based ceramic water filters: A randomized, controlled trial in rural Bolivia. American Journal of Tropical Medicine and Hygiene, 70(6): 651–657
https://doi.org/10.4269/ajtmh.2004.70.651
|
7 |
A Geremew, B Mengistie, E Alemayehu, D S Lantagne, J Mellor, G Sahilu (2018). Point-of-use water chlorination among urban and rural households with under-five-year children: A comparative study in Kersa Health and Demographic Surveillance Site, Eastern Ethiopia. Journal of Water, Sanitation, and Hygiene for Development, 8(3): 468–480
https://doi.org/10.2166/washdev.2018.173
|
8 |
J Y Goodwin, A C Elmore, C Salvinelli, M R Reidmeyer (2017). An optical method for characterizing carbon content in ceramic pot filters. Journal of Water and Health, 15(4): 536–544
https://doi.org/10.2166/wh.2017.049
|
9 |
L Guerrero-Latorre, P Balseca-Enriquez, C Moyota-Tello, R Bravo-Camino, S Davila-Chavez, E Bonifaz-Arcos, B Romero-Carpio, M Chico-Teran (2019). Performance of black ceramic water filters and their implementation in rural Ecuador. Journal of Water, Sanitation, and Hygiene for Development, 9(4): 694–702
https://doi.org/10.2166/washdev.2019.185
|
10 |
J, Hagan N Harley, R Hughes, A Chouhan, D Pointing, M Sampson, V Saom, K Smith (2009). Resource Developing International—Cambodia ceramic water filter handbook. Phnom Penh, Cambodia: Engnieers Without Borders Australia
|
11 |
Y He, G Huang, C An, J Huang, P Zhang, X Chen, X Xin (2018). Reduction of Escherichia coli using ceramic disk filter decorated by nano-TiO2: A low-cost solution for household water purification. Science of the Total Environment, 616-617: 1628–1637
https://doi.org/10.1016/j.scitotenv.2017.10.149
|
12 |
J Huang, G H Huang, C J An, Y He, Y Yao, P Zhang, J Shen (2018). Performance of ceramic disk filter coated with nano ZnO for removing Escherichia coli from water in small rural and remote communities of developing regions. Environmental Pollution, 238: 52–62
https://doi.org/10.1016/j.envpol.2018.03.008
|
13 |
E N Kallman, V A Oyanedel-Craver, J A Smith (2011). Ceramic filters impregnated with silver nanoparticles for point-of-use water treatment in rural Guatemala. Journal of Environmental Engineering, 137(6): 407–415
https://doi.org/10.1061/(ASCE)EE.1943-7870.0000330
|
14 |
D S Lantagne (2001). Investigation of the potters for peace colloidal silver impregnated ceramic filter Report 2: Field Investigations
|
15 |
K J Lucier, S E Dickson-Anderson, C J Schuster-Wallace (2017). Effectiveness of silver and copper infused ceramic drinking water filters in reducing microbiological contaminants. Journal of Water Supply: Research & Technology- Aqua, 66(7): 528–536
https://doi.org/10.2166/aqua.2017.028
|
16 |
B A Lyon-Marion, A M Mittelman, J Rayner, D S Lantagne, K D Pennell (2018). Impact of chlorination on silver elution from ceramic water filters. Water Research, 142: 471–479
https://doi.org/10.1016/j.watres.2018.06.008
|
17 |
B Michen, J Fritsch, C Aneziris, T Graule (2013). Improved virus removal in ceramic depth filters modified with MgO. Environmental Science & Technology, 47(3): 1526–1533
https://doi.org/10.1021/es303685a
|
18 |
B Michen, F Meder, A Rust, J Fritsch, C Aneziris, T Graule (2012). Virus removal in ceramic depth filters based on diatomaceous earth. Environmental Science & Technology, 46(2): 1170–1177
https://doi.org/10.1021/es2030565
|
19 |
A M Mittelman, D S Lantagne, J Rayner, K D Pennell (2015). Silver dissolution and release from ceramic water filters. Environmental Science & Technology, 49(14): 8515–8522
https://doi.org/10.1021/acs.est.5b01428
|
20 |
J F Morris, J Murphy, K Fagerli, C Schneeberger, P Jaron, F Moke, J Juma, J B Ochieng, R Omore, D Roellig, L Xiao, J W Priest, J Narayanan, J M Montgomery, V Hill, E Mintz, T L Ayers, C E O’reilly (2018). A randomized controlled trial to assess the impact of ceramic water filters on prevention of diarrhea and cryptosporidiosis in infants and young children-western Kenya, 2013. American Journal of Tropical Medicine and Hygiene, 98(5): 1260–1268
https://doi.org/10.4269/ajtmh.17-0731
|
21 |
H M Murphy, E A Mcbean, K Farahbakhsh (2010). Nitrification, denitrification and ammonification in point-of-use biosand filters in rural Cambodia. Journal of Water and Health, 8(4): 803–817
https://doi.org/10.2166/wh.2010.163
|
22 |
V A Oyanedel-Craver, J A Smith (2008). Sustainable colloidal-silver-impregnated ceramic filter for point-of-use water treatment. Environmental Science & Technology, 42(3): 927–933
https://doi.org/10.1021/es071268u
|
23 |
M Peter-Varbanets, C Zurbrugg, C Swartz, W Pronk (2009). Decentralized systems for potable water and the potential of membrane technology. Water Research, 43(2): 245–265
https://doi.org/10.1016/j.watres.2008.10.030
|
24 |
J Rayner, X Luo, J Schubert, P Lennon, K Jellison, D Lantagne (2017). The effects of input materials on ceramic water filter efficacy for household drinking water treatment. Water Science and Technology: Water Supply, 17(3): 859–869
https://doi.org/10.2166/ws.2016.176
|
25 |
J Rayner, B Skinner, D Lantagne (2013a). Current practices in manufacturing locally-made ceramic pot filters for water treatment in developing countries. Journal of Water, Sanitation, and Hygiene for Development, 3(2): 252–261
https://doi.org/10.2166/washdev.2013.178
|
26 |
J Rayner, H Zhang, J Schubert, P Lennon, D Lantagne, V Oyanedel-Craver (2013b). Laboratory investigation into the effect of silver application on the bacterial removal efficacy of filter material for use on locally produced ceramic water filters for household drinking water treatment. ACS Sustainable Chemistry & Engineering, 1(7): 737–745
https://doi.org/10.1021/sc400068p
|
27 |
D Ren, L M Colosi, J A Smith (2013). Evaluating the sustainability of ceramic filters for point-of-use drinking water treatment. Environmental Science & Technology, 47(19): 11206–11213
https://doi.org/10.1021/es4026084
|
28 |
D J Ren, J A Smith (2013). Retention and transport of silver nanoparticles in a ceramic porous medium used for point-of-use water treatment. Environmental Science & Technology, 47(8): 3825–3832
https://doi.org/10.1021/es4000752
|
29 |
E C Robbins, J Guo, C D Adams (2014). Removal of As(III) and As(V) in surface modified ceramic filters. Journal of Water, Sanitation, and Hygiene for Development, 4(2): 214–222
https://doi.org/10.2166/washdev.2014.114
|
30 |
H Salsali, E Mcbean, J Brunsting (2011). Virus removal efficiency of Cambodian ceramic pot water purifiers. Journal of Water and Health, 9(2): 306–311
https://doi.org/10.2166/wh.2011.087
|
31 |
C Salvinelli, A C Elmore (2015). Assessment of the impact of water parameters on the flow rate of ceramic pot filters in a long-term experiment. Water Science and Technology: Water Supply, 15(6): 1425–1432
https://doi.org/10.2166/ws.2015.107
|
32 |
C Salvinelli, A C Elmore, M R Reidmeyer, K D Drake, K I Ahmad (2016). Characterization of the relationship between ceramic pot filter water production and turbidity in source water. Water Research, 104: 28–33
https://doi.org/10.1016/j.watres.2016.07.076
|
33 |
M D Sobsey, C E Stauber, L M Casanova, J M Brown, M A Elliott (2008). Point of use household drinking water filtration: A practical, effective solution for providing sustained access to safe drinking water in the developing world. Environmental Science & Technology, 42(12): 4261–4267
https://doi.org/10.1021/es702746n
|
34 |
A I A Soppe, S G J Heijman, I Gensburger, A Shantz, D Van Halem, J Kroesbergen, G H Wubbels, P Smeets (2015). Critical parameters in the production of ceramic pot filters for household water treatment in developing countries. Journal of Water and Health, 13(2): 587–599
https://doi.org/10.2166/wh.2014.090
|
35 |
R K Sullivan, M Erickson, V A Oyanedel-Craver (2017). Understanding the microbiological, organic and inorganic contaminant removal capacity of ceramic water filters doped with different silver nanoparticles. Environmental Science. Nano, 4(12): 2348–2355
https://doi.org/10.1039/C7EN00443E
|
36 |
The Ceramics Manufacturing Working Group (2011). Best practice recommendations for local manufacturing of ceramic pot filters for household water treatment. Atlant, GA, USA: Ceramics Manufacturing Working Group
|
37 |
H van der Laan, D Van Halem, P Smeets, A Soppe, J Kroesbergen, G Wubbels, J Nederstigt, I Gensburger, S Heijman (2014). Bacteria and virus removal effectiveness of ceramic pot filters with different silver applications in a long term experiment. Water Research, 51: 47–54
https://doi.org/10.1016/j.watres.2013.11.010
|
38 |
D Van Halem (2006). Ceramic silver impregnated pot filters for household drinking water treatment in developing countries. Delft, Netherlands: Delft University of Technology
|
39 |
D Van Halem, H Van Der Laan, A Soppe, S Heijman (2017). High flow ceramic pot filters. Water Research, 124: 398–406
https://doi.org/10.1016/j.watres.2017.07.045
|
40 |
M Wegmann, B Michen, T Graule (2008a). Nanostructured surface modification of microporous ceramics for efficient virus filtration. Journal of the European Ceramic Society, 28(8): 1603–1612
https://doi.org/10.1016/j.jeurceramsoc.2007.11.002
|
41 |
M Wegmann, B Michen, T Luxbacher, J Fritsch, T Graule (2008b). Modification of ceramic microfilters with colloidal zirconia to promote the adsorption of viruses from water. Water Research, 42(6–7): 1726–1734
https://doi.org/10.1016/j.watres.2007.10.030
|
42 |
World Health Organization (2017). Progress on drinking water sanitation and hygiene: 2017 update and SDG baselines. Geneva: World Health Organization
|
43 |
World Health Organization (2019a). Progress on household drinking water, sanitation and hygiene 2000–2017: Special focus on inequalities. Geneva: World Health Organization
|
44 |
World Health Organization (2019b). Drinking-water Fact sheet. New York: World Health Organization
|
45 |
H Yang, X Min, S Xu, J Bender, Y Wang (2020). Development of effective and fast-flow ceramic porous media for point-of-use water treatment: Effect of pore size distribution. ACS Sustainable Chemistry & Engineering, 8(6): 2531–2539
https://doi.org/10.1021/acssuschemeng.9b07177
|
46 |
H Yang, X Min, S Xu, Y Wang (2019a). Lanthanum(III)-coated ceramics as a promising material in point-of-use water treatment for arsenite and arsenate removal. ACS Sustainable Chemistry & Engineering, 7(10): 9220–9227
https://doi.org/10.1021/acssuschemeng.8b06878
|
47 |
H Yang, Y Wang, J Bender, S Xu (2019b). Removal of arsenate and chromate by lanthanum-modified granular ceramic material: The critical role of coating temperature. Scientific Reports, 9(1): 7690
https://doi.org/10.1038/s41598-019-44165-8
|
48 |
M Youmoue, R T T Fongang, J C Sofack, E Kamseu, U C Melo, I K Tonle, C Leonelli, S Rossignol (2017). Design of ceramic filters using clay/sawdust composites: Effect of pore network on the hydraulic permeability. Ceramics International, 43(5): 4496–4507
https://doi.org/10.1016/j.ceramint.2016.12.101
|
49 |
H Y Zhang, V Oyanedel-Craver (2013). Comparison of the bacterial removal performance of silver nanoparticles and a polymer based quaternary amine functiaonalized silsesquioxane coated point-of-use ceramic water filters. Journal of Hazardous Materials, 260: 272–277
https://doi.org/10.1016/j.jhazmat.2013.05.025
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|