|
|
Air-side heat transfer and friction characteristics
of biofouled evaporator under wet conditions |
Hui PU,Guoliang DING,Xiaokui MA,Haitao HU,Yifeng GAO, |
School of Mechanical
Engineering, Shanghai Jiao Tong University, Shanghai 200240, China; |
|
|
Abstract The effects of biofouling on air-side heat transfer and friction characteristics under wet conditions of three biofouled finned tube heat exchangers and one clean finned tube heat exchanger were investigated experimentally. Experimental results indicate that the biofouled fin efficiency of the evaporator decreases by 15.5% compared with the clean evaporator under the condition of the biofouled area ratio of 60% at the inlet air velocity of 2.0m/s; The ranges of friction fouling factor and heat transfer fouling factor are 19.8%―43.1% and ―15.6%―13.1%, respectively; a small quantity of biofouled particles can enhance heat transfer at low Reynolds number, and the enhancement effect decreases with the increase of Reynolds number.
|
Keywords
finned tube
evaporator
fouling
heat transfer
friction
|
Issue Date: 05 September 2010
|
|
|
Yang L, Braun J E, Groll E A. Impact of fouling on the performanceof filter–evaporator combinations. International Journal of Refrigeration, 2007, 30(3): 489―498
doi: 10.1016/j.ijrefrig.2006.08.006
|
|
Yang L, Braun J E, Groll E A. The impact of evaporator fouling andfiltration on the performance of packaged air conditioners. International Journal of Refrigeration, 2007, 30(3): 506―514
doi: 10.1016/j.ijrefrig.2006.08.010
|
|
Mason D J, Heikal M R, Douch N. Air side fouling of compactheat exchangers. International Journalof Heat Exchangers, 2006, 1(7): 1―14
|
|
Haghighi-Khoshkhoo R, McCluskey F M J. Air-side fouling of compact heat exchangers for discrete particlesize ranges. Heat Transfer Engineering, 2007, 28(1): 58―64
doi: 10.1080/01457630600985675
|
|
Siegel J A, Nazaroff W W. Predicting particle deposition on HVAC heat exchangers. Atmospheric Environment, 2003, 37(30―40): 5587―5596
|
|
Zubair S M, Qureshi B A. A probabilistic fouling and cost model for plate-and-frame heat exchangers. International Journal of Energy Research, 2006, 30(1): 1―17
doi: 10.1002/er.1109
|
|
Radhakrishnan V R, Ramasamy M, Zabiri H, Do Thanh V, Tahir N M, Mukhtar H, Hamdi M R, Ramli N. Heat exchanger fouling modeland preventive maintenance scheduling tool. Applied Thermal Engineering, 2007, 27(17,18): 1791―2802
|
|
Min J C, Webb R L, Bemisderfer C H. Long-term hydraulic performanceof dehumidifying heat-exchangers with and without hydrophilic coatings. HVAC& R Research, 2000, 6(3): 257―272
|
|
Kim C N, Jeong J, Youn B. Evaluation of thermal contact conductanceusing a new experimental-numerical method in fin-tube heat exchangers. International Journal of Refrigeration, 2003, 26(8): 900―908
doi: 10.1016/S0140-7007(03)00075-6
|
|
American Society of Heating,Refrigerating and Air-Conditioning Engineers. ASHRAE Standard 41.2-1987 Standard Methods for Laboratory Air-flowMeasurement. Inc, Atlanta, 1987
|
|
Ma X Q, Ding G L, Zhang Y M, Wang K J. Effects of hydrophilic coating on air side heat transfer and frictioncharacteristics of wavy fin and tube heat exchangers under dehumidifyingconditions. Energy Conversion and Management, 2007, 48(9): 2525―2532
doi: 10.1016/j.enconman.2007.03.017
|
|
Moffat R J. Describing the uncertainties in experimental results. Experimental Thermal and Fluid Science, 1988, 1(1): 3―17
doi: 10.1016/0894-1777(88)90043-X
|
|
Chilton T H, Colburn A P. Mass transfer (absorption) coefficients. Industrial and Engineering Chemistry, 1934, 26(11): 1183―1187
doi: 10.1021/ie50299a012
|
|
Tu P, Inaba H, Horibe A, Li, Z M, Haruki N. Fin efficiency of an annularfin composed of a substrate metallic fin and a coating layer. Journal of Heat Transfer, 2006, 128(8): 851―854
doi: 10.1115/1.2227043
|
|
Kays W M, London A. CompactHeat Exchangers. 3rd ed. New York: Mcgraw-Hill, 1984
|
|
Kuvannarat T, Wang C C, Wongwises S. Effect of fin thickness onthe air-side performance of wavy fin-and-tube heat exchangers underdehumidifying conditions. InternationalJournal of Heat and Mass Transfer, 2006, 49(15,16): 2587―2596
|
|
Wang C C, Hsieh Y C, Lin Y T. Performance of plate finned tube heatexchangers under dehumidifying conditions. Journal of Heat Transfer, 1997, 119(1): 109―117
doi: 10.1115/1.2824075
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|