Please wait a minute...
Frontiers of Materials Science

ISSN 2095-025X

ISSN 2095-0268(Online)

CN 11-5985/TB

Postal Subscription Code 80-974

2018 Impact Factor: 1.701

Front Mater Sci    2012, Vol. 6 Issue (2) : 160-167    https://doi.org/10.1007/s11706-012-0168-2
RESEARCH ARTICLE
Coatings of needle/stripe-like fluoridated hydroxyapatite on H2O2-treated carbon/carbon composites prepared by induction heating and hydrothermal methods
Xin-Bo XIONG1(), Jian-Feng HUANG2, Xie-Rong ZENG1, Ping LIANG1, Ji-Zhao ZOU1
1. Shenzhen Key Laboratory of Special Functional Materials, Department of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, China; 2. Key Laboratory of Auxiliary Chemical & Technology for Chemical Industry (Ministry of Education), Shaanxi University of Science and Technology, Xi’an 710021, China
 Download: PDF(502 KB)   HTML
 Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract

A hydroxyapatite (HA) coating was achieved on H2O2-treated carbon/carbon (C/C) composite through hydrothermally treating and induction heating deposited CaHPO4 coating in an ammonia solution under ultrasonic water bath. Then, this HA coating was placed in a NH4F solution and hydrothermally treated again to fabricate fluorinated hydroxyapatite (FHA) coatings for 24 h at 353, 373, 393 and 413 K, respectively. The structure, morphology and chemical composition of the HA and FHA coatings were characterized by SEM, XRD, EDS and FTIR, and the adhesiveness and chemical stability of these FHA coatings were examined by a scratch test and an immersion test, respectively. The results showed that the as-prepared FHA coatings contained needle-like or stripe-like crystals, different from those of the HA coating. As the fluoridation temperature rose, the adhesiveness of the FHA coating first increased from 34.8 to 40.9 N at a temperature between 353 and 393 K, and then decreased to 24.2 N at 413 K, while the dissolution rate of the FHA coating decreased steadily. The reasons for the property variation of the FHA coatings were proposed by analyzing the morphology, composition and structure of the coatings.

Keywords carbon      hydroxyapatite (HA)      coating      scratch test      dissolution behavior     
Corresponding Author(s): XIONG Xin-Bo,Email:xxbszdx@szu.edu.cn   
Issue Date: 05 June 2012
 Cite this article:   
Ping LIANG,Ji-Zhao ZOU,Xin-Bo XIONG, et al. Coatings of needle/stripe-like fluoridated hydroxyapatite on H2O2-treated carbon/carbon composites prepared by induction heating and hydrothermal methods[J]. Front Mater Sci, 2012, 6(2): 160-167.
 URL:  
https://academic.hep.com.cn/foms/EN/10.1007/s11706-012-0168-2
https://academic.hep.com.cn/foms/EN/Y2012/V6/I2/160
Fig.1  XRD patterns of as-achieved HA coating on HO-treated C/C composites (a) and FHA coatings on HO-treated C/C composites prepared at 353 K (b), 373 K (c), 393 K (d), and 413 K (e).
Fig.2  Morphology of the HA coating on HO-treated C/C composites. Morphologies of FHA coatings on HO-treated C/C composites achieved at the fluoridation temperatures of 353 K, 373 K, 393 K, and 413 K. Insets show the magnified photos.
Fig.3  EDS images of HA coating and as-conversed typical FHA coating on HO-treated C/C composites.
Coating elementCoating
UntreatedFluoridated at different temperatures
353 K373 K393 K413 K
Ca/P atomic ratio1.831.671.471.461.47
F/Ca atomic ratio00.0080.1930.2030.274
F content /wt.%01.523.033.164.23
Tab.1  Change of element content in the coatings on HO-treated C/C composites before and after fluoridation at different temperatures
Fig.4  FTIR spectra of the HA and FHA coatings on HO-treated C/C composites achieved at different fluoridation temperature of 353, 373, 393 and 413 K.
Fig.5  Plot of typical friction force load for the FHA coatings on HO-treated C/C composites at different fluoridation temperature.
Fig.6  Stereomicroscopic images of the scratch test performed on FHA coatings on HO-treated C/C composites at the hydrothermally fluoridation temperature of 353 K, 373 K, 393 K and 413 K.
Fig.7  Ca concentration dissolved from HA and FHA coatings after incubation in a physiologic saline solution at 37°C for different periods.
1 Zhao X N, Hu T, Li H J, . Electrochemically assisted codeposition of calcium phosphate/collagen coatings on carbon/carbon composites. Applied Surface Science , 2011, 257(8): 3612–3619
2 Cao N, Dong J W, Wang Q X, . Plasma-sprayed hydroxyapatite coating on carbon/carbon composite scaffolds for bone tissue engineering and related tests in vivo. Journal of Biomedical Materials Research Part A , 2010, 92(3): 1019–1027
3 Huang J F, Zhu G Y, Cao L Y, . Influence of deposition voltage on phases and microstructure of hydroxyapatite coatings prepared on C-C composites by hydrothermal electrodeposition. Materials Technology: Advanced Performance Materials , 2007, 22(2): 88–90
4 Zhai Y Q, Li K Z, Li H J, . Influence of NaF concentration on fluorine-containing hydroxyapatite coating on carbon/carbon composites. Materials Chemistry and Physics , 2007, 106(1): 22–26
5 Cheng K, Ren C, Weng W, . Bonding strength of fluoridated hydroxyapatite coatings: a comparative study on pull-out and scratch analysis. Thin Solid Films , 2009, 517(17): 5361–5364
6 Zhang S, Zeng X T, Wang Y S, . Adhesion strength of sol–gel derived fluoridated hydroxyapatite coatings. Surface and Coatings Technology , 2006, 200(22-23): 6350–6354
7 Kim H W, Kim H E, Knowles J C. Fluor-hydroxyapatite sol–gel coating on titanium substrate for hard tissue implants. Biomaterials , 2004, 25(17): 3351–3358
8 Wang J, Chao Y L, Wan Q B, . Fluoridated hydroxyapatite coatings on titanium obtained by electrochemical deposition. Acta Biomaterialia , 2009, 5(5): 1798–1807
9 Lee E J, Lee S H, Kim H W, . Fluoridated apatite coatings on titanium obtained by electron-beam deposition. Biomaterials , 2005, 26(18): 3843–3851
10 Wang C, Li K-Z, Zhai Y-Q, . Study of fluorhydroxyapatite coatings on carbon/carbon composites. Surface and Coatings Technology , 2009, 203(13): 1771–1775
11 Xiong X-B, Liao B-C, Huang J-F, . Conversion of HA on NT-C/C composites from ultrasonic induction heating deposited monetite to FHA coating by an alkaline followed by NaF solution hydrothermal treatment methods. Journal of Inorganic and Organometallic Polymers and Materials , 2011, 21(3): 431–437
12 Xiong X-B, Zeng X-R, Zhou C-L. Preparation of enhanced HA coating on H2O2-treated carbon/carbon composite by induction heating and hydrothermal treatment methods. Materials Chemistry and Physics , 2009, 114(1): 434–438
13 Xiong X-B, Chu C-C, Huang J-F, . Preparation and characterization of fluoridated hydroxyapatite coatings on HT-C/C composites. Surface and Coatings Technology , 2012, 206(8-9): 2535–2540
14 Bogdanoviciene I, Beganskiene A, T?nsuaadu K, . Calcium hydroxyapatite, Ca10(PO4)6(OH)2 ceramics prepared by aqueous sol–gel processing. Materials Research Bulletin , 2006, 41(9): 1754–1762
16 Xu G F, Aksay I A, Groves J T. Continuous crystalline carbonate apatite thin films. A biomimetic approach. Journal of the American Chemical Society , 2001, 123(10): 2196–2203
17 De Maeyer E A, Verbeeck R M H, Pieters I Y. Effect of K+ on the stoichiometry of carbonated hydroxyapatite obtained by the hydrolysis of monetite. Inorganic Chemistry , 1996, 35(4): 857–863
18 Eslami H, Solati-Hashjin M, Tahriri M. The comparison of powder characteristics and physicochemical, mechanical and biological properties between nanostructure ceramics of hydroxyapatite and fluoridated hydroxyapatite. Materials Science and Engineering C , 2009, 29(4): 1387–1398
19 Xiong X B, Zeng X R, Zou C L. Bioactive calcium phosphate coating on carbon/carbon composites prepared by ultrasonicated induction heating deposition. Advanced Materials Research , 2011, 152-153: 1763–1766
20 Kozerski S, Pawlowski L, Jaworski R, . Two zones microstructure of suspension plasma sprayed hydroxyapatite coatings. Surface and Coatings Technology , 2010, 204(9-10): 1380–1387
21 Zhai Y Q, Li K Z, Li H J, . A fluorine-containing hydroxyapatite bioactive coating on the surface of C/C composites. Chinese Journal of Materials Research , 2007, 21(6): 570–576 (in Chinese)
[1] Biyu ZHOU, Junbo LI, Binzhong LU, Wenlan WU, Leitao ZHANG, Ju LIANG, Junpeng YI, Xin LI. Novel polyzwitterion shell with adaptable surface chemistry engineered to enhance anti-fouling and intracellular imaging of detonation nanodiamonds under tumor pHe[J]. Front. Mater. Sci., 2020, 14(4): 402-412.
[2] Zheng-Zheng YIN, Wei HUANG, Xiang SONG, Qiang ZHANG, Rong-Chang ZENG. Self-catalytic degradation of iron-bearing chemical conversion coating on magnesium alloys ---- Influence of Fe content[J]. Front. Mater. Sci., 2020, 14(3): 296-313.
[3] Yugui WANG, Yajun JI, Qizhi TIAN. Size-constrained ultrathin BiOCl nanosheets@C composites with enhanced photocatalytic and photoelectrochemical performance[J]. Front. Mater. Sci., 2020, 14(3): 275-285.
[4] Yun ZHAO, Linan YANG, Canliang MA. One-step gas-phase construction of carbon-coated Fe3O4 nanoparticle/carbon nanotube composite with enhanced electrochemical energy storage[J]. Front. Mater. Sci., 2020, 14(2): 145-154.
[5] Zai-Meng QIU, Fen ZHANG, Jun-Tong CHU, Yu-Chao LI, Liang SONG. Corrosion resistance and hydrophobicity of myristic acid modified Mg--Al LDH/Mg(OH)2 steam coating on magnesium alloy AZ31[J]. Front. Mater. Sci., 2020, 14(1): 96-107.
[6] Wei WU, Fen ZHANG, Yu-Chao LI, Yong-Feng ZHOU, Qing-Song YAO, Liang SONG, Rong-Chang ZENG, Sie Chin TJONG, Dong-Chu CHEN. Corrosion resistance of a silane/ceria modified Mg--Al-layered double hydroxide on AA5005 aluminum alloy[J]. Front. Mater. Sci., 2019, 13(4): 420-430.
[7] Jun ZHAO, Hang ZHAN, Hai Tao CHEN, Jian Nong WANG. Preparation and thermal properties of layered porous carbon nanotube/epoxy resin composite films[J]. Front. Mater. Sci., 2019, 13(4): 382-388.
[8] Chengzhi LUO, Guanghui LIU, Min ZHANG. Electric-field-induced microstructure modulation of carbon nanotubes for high-performance supercapacitors[J]. Front. Mater. Sci., 2019, 13(3): 270-276.
[9] Heling GUO, Xiaolin WANG, Xie LI, Xiulan ZHANG, Xinghuan LIU, Yu DAI, Rongjie WANG, Xuhong GUO, Xin JIA. Sprayable and rapidly bondable phenolic-metal coating for versatile oil/water separation[J]. Front. Mater. Sci., 2019, 13(2): 193-205.
[10] Heng CHEN, Yun CHEN, Hang ZHAN, Guang WU, Jian Ming XU, Jian Nong WANG. Preparation of carbon nanotube/epoxy composite films with high tensile strength and electrical conductivity by impregnation under pressure[J]. Front. Mater. Sci., 2019, 13(2): 165-173.
[11] Meng LIU, Lei LIU, Yifeng YU, Haijun LV, Aibing CHEN, Senlin HOU. Synthesis of nitrogen-doped carbon spheres using the modified Stöber method for supercapacitors[J]. Front. Mater. Sci., 2019, 13(2): 156-164.
[12] Xiao-Jing JI, Qiang CHENG, Jing WANG, Yan-Bin ZHAO, Zhuang-Zhuang HAN, Fen ZHANG, Shuo-Qi LI, Rong-Chang ZENG, Zhen-Lin WANG. Corrosion resistance and antibacterial effects of hydroxyapatite coating induced by polyacrylic acid and gentamicin sulfate on magnesium alloy[J]. Front. Mater. Sci., 2019, 13(1): 87-98.
[13] Pengcheng WU, Chang LIU, Yan LUO, Keliang WU, Jianning WU, Xuhong GUO, Juan HOU, Zhiyong LIU. A novel black TiO2/ZnO nanocone arrays heterojunction on carbon cloth for highly efficient photoelectrochemical performance[J]. Front. Mater. Sci., 2019, 13(1): 43-53.
[14] Chi WANG, Kai LI, Xin SUN, Yi MEI, Xin SONG, Ping NING, Lina SUN. Surface characteristics of regenerative Fe-KOH/LSB catalysts for low-temperature catalytic hydrolysis of carbon disulfide and research of the surface regeneration mechanism[J]. Front. Mater. Sci., 2018, 12(4): 426-437.
[15] Wang YANG, Wu YANG, Lina KONG, Shuanlong DI, Xiujuan QIN. Nitrogen--oxygen co-doped corrugation-like porous carbon for high performance supercapacitor[J]. Front. Mater. Sci., 2018, 12(3): 283-291.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed